Brush(ID)

base classes — bpy_struct, ID

class bpy.types.Brush(ID)

Brush datablock for storing brush settings for painting and sculpting

auto_smooth_factor

Amount of smoothing to automatically apply to each stroke

Type :float in [0, 1], default 0.0

blend

Brush blending mode

• MIX Mix, Use mix blending mode while painting.
• ADD Add, Use add blending mode while painting.
• SUB Subtract, Use subtract blending mode while painting.
• MUL Multiply, Use multiply blending mode while painting.
• LIGHTEN Lighten, Use lighten blending mode while painting.
• DARKEN Darken, Use darken blending mode while painting.
• ERASE_ALPHA Erase Alpha, Erase alpha while painting.
• ADD_ALPHA Add Alpha, Add alpha while painting.

Type :enum in [‘MIX’, ‘ADD’, ‘SUB’, ‘MUL’, ‘LIGHTEN’, ‘DARKEN’, ‘ERASE_ALPHA’, ‘ADD_ALPHA’], default ‘MIX’

clone_alpha

Opacity of clone image display

Type :float in [0, 1], default 0.0

clone_image

Image for clone tool

Type :Image

clone_offset

Type :float array of 2 items in [-inf, inf], default (0.0, 0.0)

color

Type :float array of 3 items in [0, 1], default (0.0, 0.0, 0.0)

crease_pinch_factor

How much the crease brush pinches

Type :float in [0, 1], default 0.666667

cursor_color_add

Color of cursor when adding

Type :float array of 3 items in [-inf, inf], default (0.0, 0.0, 0.0)

cursor_color_subtract

Color of cursor when subtracting

Type :float array of 3 items in [-inf, inf], default (0.0, 0.0, 0.0)

curve

Editable falloff curve

Type :CurveMapping, (readonly, never None)

direction

• ADD Add, Add effect of brush.
• SUBTRACT Subtract, Subtract effect of brush.

Type :enum in [‘ADD’, ‘SUBTRACT’], default ‘ADD’

height

Affectable height of brush (layer height for layer tool, i.e.)

Type :float in [0, 1], default 0.5

icon_filepath

File path to brush icon

Type :string, default “”, (never None)

image_tool

Type :enum in [‘DRAW’, ‘SOFTEN’, ‘SMEAR’, ‘CLONE’], default ‘DRAW’

jitter

Jitter the position of the brush while painting

Type :float in [0, 1], default 0.0

mask_tool

Type :enum in [‘DRAW’, ‘SMOOTH’], default ‘DRAW’

normal_weight

How much grab will pull vertexes out of surface during a grab

Type :float in [0, 1], default 0.0

plane_offset

Adjust plane on which the brush acts towards or away from the object surface

Type :float in [-2, 2], default 0.0

plane_trim

If a vertex is further away from offset plane than this, then it is not affected

Type :float in [0, 1], default 0.5

rate

Interval between paints for Airbrush

Type :float in [0.0001, 10000], default 0.0

sculpt_capabilities

Brush’s capabilities in sculpt mode

Type :SculptCapabilities, (readonly, never None)

sculpt_plane

Type :enum in [‘AREA’, ‘VIEW’, ‘X’, ‘Y’, ‘Z’], default ‘AREA’

sculpt_tool

Type :enum in [‘BLOB’, ‘CLAY’, ‘CLAY_STRIPS’, ‘CREASE’, ‘DRAW’, ‘FILL’, ‘FLATTEN’, ‘GRAB’, ‘INFLATE’, ‘LAYER’, ‘MASK’, ‘NUDGE’, ‘PINCH’, ‘ROTATE’, ‘SCRAPE’, ‘SIMPLIFY’, ‘SMOOTH’, ‘SNAKE_HOOK’, ‘THUMB’], default ‘BLOB’

size

Radius of the brush in pixels

Type :int in [1, 2000], default 0

smooth_stroke_factor

Higher values give a smoother stroke

Type :float in [0.5, 0.99], default 0.0

smooth_stroke_radius

Minimum distance from last point before stroke continues

Type :int in [10, 200], default 0

spacing

Spacing between brush daubs as a percentage of brush diameter

Type :int in [1, 1000], default 0

strength

How powerful the effect of the brush is when applied

Type :float in [0, 10], default 0.5

stroke_method

• DOTS Dots, Apply paint on each mouse move step.
• DRAG_DOT Drag Dot, Allows a single dot to be carefully positioned.
• SPACE Space, Limit brush application to the distance specified by spacing.
• ANCHORED Anchored, Keep the brush anchored to the initial location.
• AIRBRUSH Airbrush, Keep applying paint effect while holding mouse (spray).

Type :enum in [‘DOTS’, ‘DRAG_DOT’, ‘SPACE’, ‘ANCHORED’, ‘AIRBRUSH’], default ‘DOTS’

texture

Type :Texture

texture_angle_source_no_random

• USER User, Rotate the brush texture by given angle.
• RAKE Rake, Rotate the brush texture to match the stroke direction.

Type :enum in [‘USER’, ‘RAKE’], default ‘USER’

texture_angle_source_random

• USER User, Rotate the brush texture by given angle.
• RAKE Rake, Rotate the brush texture to match the stroke direction.
• RANDOM Random, Rotate the brush texture at random.

Type :enum in [‘USER’, ‘RAKE’, ‘RANDOM’], default ‘USER’

texture_overlay_alpha

Type :int in [1, 100], default 0

texture_sample_bias

Value added to texture samples

Type :float in [-1, 1], default 0.0

texture_slot

Type :BrushTextureSlot, (readonly)

unprojected_radius

Radius of brush in Blender units

Type :float in [0.001, inf], default 0.0

use_accumulate

Accumulate stroke daubs on top of each other

Type :boolean, default False

use_adaptive_space

Space daubs according to surface orientation instead of screen space

Type :boolean, default False

use_airbrush

Keep applying paint effect while holding mouse (spray)

Type :boolean, default False

use_alpha

When this is disabled, lock alpha while painting

Type :boolean, default False

use_anchor

Keep the brush anchored to the initial location

Type :boolean, default False

use_custom_icon

Set the brush icon from an image file

Type :boolean, default False

use_edge_to_edge

Drag anchor brush from edge-to-edge

Type :boolean, default False

use_fixed_texture

Keep texture origin in fixed position

Type :boolean, default False

use_frontface

Brush only affects vertexes that face the viewer

Type :boolean, default False

use_inverse_smooth_pressure

Lighter pressure causes more smoothing to be applied

Type :boolean, default False

use_locked_size

When locked brush stays same size relative to object; when unlocked brush size is given in pixels

Type :boolean, default False

use_offset_pressure

Enable tablet pressure sensitivity for offset

Type :boolean, default False

use_original_normal

When locked keep using normal of surface where stroke was initiated

Type :boolean, default False

use_paint_image

Use this brush in texture paint mode

Type :boolean, default False

use_paint_sculpt

Use this brush in sculpt mode

Type :boolean, default False

use_paint_vertex

Use this brush in vertex paint mode

Type :boolean, default False

use_paint_weight

Use this brush in weight paint mode

Type :boolean, default False

use_persistent

Sculpt on a persistent layer of the mesh

Type :boolean, default False

use_plane_trim

Enable Plane Trim

Type :boolean, default False

use_pressure_jitter

Enable tablet pressure sensitivity for jitter

Type :boolean, default False

use_pressure_size

Enable tablet pressure sensitivity for size

Type :boolean, default False

use_pressure_spacing

Enable tablet pressure sensitivity for spacing

Type :boolean, default False

use_pressure_strength

Enable tablet pressure sensitivity for strength

Type :boolean, default False

use_rake

Rotate the brush texture to match the stroke direction

Type :boolean, default False

use_random_rotation

Rotate the brush texture at random

Type :boolean, default False

use_restore_mesh

Allow a single dot to be carefully positioned

Type :boolean, default False

use_smooth_stroke

Brush lags behind mouse and follows a smoother path

Type :boolean, default False

use_space

Limit brush application to the distance specified by spacing

Type :boolean, default False

use_space_attenuation

Automatically adjust strength to give consistent results for different spacings

Type :boolean, default False

use_texture_overlay

Show texture in viewport

Type :boolean, default False

use_wrap

Enable torus wrapping while painting

Type :boolean, default False

vertex_tool

• MIX Mix, Use mix blending mode while painting.
• ADD Add, Use add blending mode while painting.
• SUB Subtract, Use subtract blending mode while painting.
• MUL Multiply, Use multiply blending mode while painting.
• BLUR Blur, Blur the color with surrounding values.
• LIGHTEN Lighten, Use lighten blending mode while painting.
• DARKEN Darken, Use darken blending mode while painting.

Type :enum in [‘MIX’, ‘ADD’, ‘SUB’, ‘MUL’, ‘BLUR’, ‘LIGHTEN’, ‘DARKEN’], default ‘MIX’

weight

Vertex weight when brush is applied

Type :float in [0, 1], default 1.0

Inherited Properties

bpy_struct.id_data ID.name ID.users ID.use_fake_user ID.tag

ID.is_updated ID.is_updated_data ID.is_library_indirect ID.library

Inherited Functions

bpy_struct.as_pointer bpy_struct.driver_add bpy_struct.driver_remove bpy_struct.get bpy_struct.is_property_hidden bpy_struct.is_property_set bpy_struct.items bpy_struct.keyframe_delete bpy_struct.keyframe_insert bpy_struct.keys

bpy_struct.path_from_id bpy_struct.path_resolve bpy_struct.type_recast bpy_struct.values ID.copy ID.user_clear ID.animation_data_create ID.animation_data_clear ID.update_tag

References

bpy.context.brush BlendData.brushes BlendDataBrushes.new

BlendDataBrushes.remove Paint.brush