Mesh Operators¶

bpy.ops.mesh.beautify_fill(angle_limit=3.14159)¶

Rearrange some faces to try to get less degenerated geometry

Parameters:	angle_limit (float in [0, 3.14159], (optional)) – Max Angle, Angle limit

bpy.ops.mesh.bevel(offset_type='OFFSET', offset=0.0, segments=1, profile=0.5, vertex_only=False, clamp_overlap=False, material=-1)¶

Edge Bevel

Parameters:

offset_type (enum in [‘OFFSET’, ‘WIDTH’, ‘DEPTH’, ‘PERCENT’], (optional)) –
Amount Type, What distance Amount measures
- OFFSET Offset, Amount is offset of new edges from original.
- WIDTH Width, Amount is width of new face.
- DEPTH Depth, Amount is perpendicular distance from original edge to bevel face.
- PERCENT Percent, Amount is percent of adjacent edge length.
offset (float in [-inf, inf], (optional)) – Amount
segments (int in [1, 50], (optional)) – Segments, Segments for curved edge
profile (float in [0.15, 1], (optional)) – Profile, Controls profile shape (0.5 = round)
vertex_only (boolean, (optional)) – Vertex Only, Bevel only vertices
clamp_overlap (boolean, (optional)) – Clamp Overlap, Do not allow beveled edges/vertices to overlap each other
material (int in [-1, inf], (optional)) – Material, Material for bevel faces (-1 means use adjacent faces)

bpy.ops.mesh.bisect(plane_co=(0.0, 0.0, 0.0), plane_no=(0.0, 0.0, 0.0), use_fill=False, clear_inner=False, clear_outer=False, threshold=0.0001, xstart=0, xend=0, ystart=0, yend=0, cursor=1002)¶

Cut geometry along a plane (click-drag to define plane)

Parameters:

plane_co (float array of 3 items in [-inf, inf], (optional)) – Plane Point, A point on the plane
plane_no (float array of 3 items in [-inf, inf], (optional)) – Plane Normal, The direction the plane points
use_fill (boolean, (optional)) – Fill, Fill in the cut
clear_inner (boolean, (optional)) – Clear Inner, Remove geometry behind the plane
clear_outer (boolean, (optional)) – Clear Outer, Remove geometry in front of the plane
threshold (float in [0, 10], (optional)) – Axis Threshold
xstart (int in [-inf, inf], (optional)) – X Start
xend (int in [-inf, inf], (optional)) – X End
ystart (int in [-inf, inf], (optional)) – Y Start
yend (int in [-inf, inf], (optional)) – Y End
cursor (int in [0, inf], (optional)) – Cursor, Mouse cursor style to use during the modal operator

bpy.ops.mesh.blend_from_shape(shape='', blend=1.0, add=True)¶

Blend in shape from a shape key

Parameters:	shape (enum in [], (optional)) – Shape, Shape key to use for blending blend (float in [-inf, inf], (optional)) – Blend, Blending factor add (boolean, (optional)) – Add, Add rather than blend between shapes

bpy.ops.mesh.bridge_edge_loops(type='SINGLE', use_merge=False, merge_factor=0.5, twist_offset=0, number_cuts=0, interpolation='PATH', smoothness=1.0, profile_shape_factor=0.0, profile_shape='SMOOTH')¶

Make faces between two or more edge loops

Parameters:

type (enum in [‘SINGLE’, ‘CLOSED’, ‘PAIRS’], (optional)) – Connect Loops, Method of bridging multiple loops
use_merge (boolean, (optional)) – Merge, Merge rather than creating faces
merge_factor (float in [0, 1], (optional)) – Merge Factor
twist_offset (int in [-1000, 1000], (optional)) – Twist, Twist offset for closed loops
number_cuts (int in [0, inf], (optional)) – Number of Cuts
interpolation (enum in [‘LINEAR’, ‘PATH’, ‘SURFACE’], (optional)) – Interpolation, Interpolation method
smoothness (float in [0, inf], (optional)) – Smoothness, Smoothness factor
profile_shape_factor (float in [-inf, inf], (optional)) – Profile Factor
profile_shape (enum in [‘SMOOTH’, ‘SPHERE’, ‘ROOT’, ‘SHARP’, ‘LINEAR’], (optional)) –
Profile Shape, Shape of the profile
- SMOOTH Smooth, Smooth falloff.
- SPHERE Sphere, Spherical falloff.
- ROOT Root, Root falloff.
- SHARP Sharp, Sharp falloff.
- LINEAR Linear, Linear falloff.

bpy.ops.mesh.colors_reverse()¶: Flip direction of vertex colors inside faces

bpy.ops.mesh.colors_rotate(use_ccw=False)¶

Rotate vertex colors inside faces

Parameters:	use_ccw (boolean, (optional)) – Counter Clockwise

bpy.ops.mesh.convex_hull(delete_unused=True, use_existing_faces=True, make_holes=False, join_triangles=True, limit=0.698132, uvs=False, vcols=False, sharp=False, materials=False)¶

Enclose selected vertices in a convex polyhedron

Parameters:

delete_unused (boolean, (optional)) – Delete Unused, Delete selected elements that are not used by the hull
use_existing_faces (boolean, (optional)) – Use Existing Faces, Skip hull triangles that are covered by a pre-existing face
make_holes (boolean, (optional)) – Make Holes, Delete selected faces that are used by the hull
join_triangles (boolean, (optional)) – Join Triangles, Merge adjacent triangles into quads
limit (float in [0, 3.14159], (optional)) – Max Angle, Angle Limit
uvs (boolean, (optional)) – Compare UVs
vcols (boolean, (optional)) – Compare VCols
sharp (boolean, (optional)) – Compare Sharp
materials (boolean, (optional)) – Compare Materials

bpy.ops.mesh.customdata_clear_mask()¶: Clear vertex sculpt masking data from the mesh

bpy.ops.mesh.customdata_clear_skin()¶: Clear vertex skin layer

bpy.ops.mesh.customdata_custom_splitnormals_add()¶: Add a custom split normals layer, if none exists yet

bpy.ops.mesh.customdata_custom_splitnormals_clear()¶: Remove the custom split normals layer, if it exists

bpy.ops.mesh.delete(type='VERT')¶

Delete selected vertices, edges or faces

Parameters:	type (enum in [‘VERT’, ‘EDGE’, ‘FACE’, ‘EDGE_FACE’, ‘ONLY_FACE’], (optional)) – Type, Method used for deleting mesh data

bpy.ops.mesh.delete_edgeloop(use_face_split=True)¶

Delete an edge loop by merging the faces on each side

Parameters:	use_face_split (boolean, (optional)) – Face Split, Split off face corners to maintain surrounding geometry

bpy.ops.mesh.delete_loose(use_verts=True, use_edges=True, use_faces=False)¶

Delete loose vertices, edges or faces

Parameters:	use_verts (boolean, (optional)) – Vertices, Remove loose vertices use_edges (boolean, (optional)) – Edges, Remove loose edges use_faces (boolean, (optional)) – Faces, Remove loose faces

bpy.ops.mesh.dissolve_degenerate(threshold=0.0001)¶

Dissolve zero area faces and zero length edges

Parameters:	threshold (float in [1e-06, 50], (optional)) – Merge Distance, Minimum distance between elements to merge

bpy.ops.mesh.dissolve_edges(use_verts=True, use_face_split=False)¶

Dissolve edges, merging faces

Parameters:	use_verts (boolean, (optional)) – Dissolve Verts, Dissolve remaining vertices use_face_split (boolean, (optional)) – Face Split, Split off face corners to maintain surrounding geometry

bpy.ops.mesh.dissolve_faces(use_verts=False)¶

Dissolve faces

Parameters:	use_verts (boolean, (optional)) – Dissolve Verts, Dissolve remaining vertices

bpy.ops.mesh.dissolve_limited(angle_limit=0.0872665, use_dissolve_boundaries=False, delimit=set())¶

Dissolve selected edges and verts, limited by the angle of surrounding geometry

Parameters:

angle_limit (float in [0, 3.14159], (optional)) – Max Angle, Angle limit
use_dissolve_boundaries (boolean, (optional)) – All Boundaries, Dissolve all vertices inbetween face boundaries
delimit (enum set in {‘NORMAL’, ‘MATERIAL’, ‘SEAM’}, (optional)) –
Delimit, Delimit dissolve operation
- NORMAL Normal, Delimit by face directions.
- MATERIAL Material, Delimit by face material.
- SEAM Seam, Delimit by edge seams.

bpy.ops.mesh.dissolve_mode(use_verts=False, use_face_split=False, use_boundary_tear=False)¶

Dissolve geometry based on the selection mode

Parameters:	use_verts (boolean, (optional)) – Dissolve Verts, Dissolve remaining vertices use_face_split (boolean, (optional)) – Face Split, Split off face corners to maintain surrounding geometry use_boundary_tear (boolean, (optional)) – Tear Boundary, Split off face corners instead of merging faces

bpy.ops.mesh.dissolve_verts(use_face_split=False, use_boundary_tear=False)¶

Dissolve verts, merge edges and faces

Parameters:	use_face_split (boolean, (optional)) – Face Split, Split off face corners to maintain surrounding geometry use_boundary_tear (boolean, (optional)) – Tear Boundary, Split off face corners instead of merging faces

bpy.ops.mesh.drop_named_image(name="Image", filepath="Path", relative_path=True)¶

Assign Image to active UV Map, or create an UV Map

Parameters:	name (string, (optional, never None)) – Name, Image name to assign filepath (string, (optional, never None)) – Filepath, Path to image file relative_path (boolean, (optional)) – Relative Path, Select the file relative to the blend file

bpy.ops.mesh.dupli_extrude_cursor(rotate_source=True)¶

Duplicate and extrude selected vertices, edges or faces towards the mouse cursor

Parameters:	rotate_source (boolean, (optional)) – Rotate Source, Rotate initial selection giving better shape

bpy.ops.mesh.duplicate(mode=1)¶

Duplicate selected vertices, edges or faces

Parameters:	mode (int in [0, inf], (optional)) – Mode

bpy.ops.mesh.duplicate_move(MESH_OT_duplicate=None, TRANSFORM_OT_translate=None)¶

Duplicate mesh and move

Parameters:	MESH_OT_duplicate (`MESH_OT_duplicate`, (optional)) – Duplicate, Duplicate selected vertices, edges or faces TRANSFORM_OT_translate (`TRANSFORM_OT_translate`, (optional)) – Translate, Translate (move) selected items

bpy.ops.mesh.edge_collapse()¶: Collapse selected edges

bpy.ops.mesh.edge_face_add()¶: Add an edge or face to selected

bpy.ops.mesh.edge_rotate(use_ccw=False)¶

Rotate selected edge or adjoining faces

Parameters:	use_ccw (boolean, (optional)) – Counter Clockwise

bpy.ops.mesh.edge_split()¶: Split selected edges so that each neighbor face gets its own copy

bpy.ops.mesh.edgering_select(extend=False, deselect=False, toggle=False, ring=True)¶

Select an edge ring

Parameters:	extend (boolean, (optional)) – Extend, Extend the selection deselect (boolean, (optional)) – Deselect, Remove from the selection toggle (boolean, (optional)) – Toggle Select, Toggle the selection ring (boolean, (optional)) – Select Ring, Select ring

bpy.ops.mesh.edges_select_sharp(sharpness=0.523599)¶

Select all sharp-enough edges

Parameters:	sharpness (float in [0.000174533, 3.14159], (optional)) – Sharpness

bpy.ops.mesh.extrude_edges_indiv(mirror=False)¶

Extrude individual edges only

Parameters:	mirror (boolean, (optional)) – Mirror Editing

bpy.ops.mesh.extrude_edges_move(MESH_OT_extrude_edges_indiv=None, TRANSFORM_OT_translate=None)¶

Extrude edges and move result

Parameters:	MESH_OT_extrude_edges_indiv (`MESH_OT_extrude_edges_indiv`, (optional)) – Extrude Only Edges, Extrude individual edges only TRANSFORM_OT_translate (`TRANSFORM_OT_translate`, (optional)) – Translate, Translate (move) selected items

bpy.ops.mesh.extrude_faces_indiv(mirror=False)¶

Extrude individual faces only

Parameters:	mirror (boolean, (optional)) – Mirror Editing

bpy.ops.mesh.extrude_faces_move(MESH_OT_extrude_faces_indiv=None, TRANSFORM_OT_shrink_fatten=None)¶

Extrude faces and move result

Parameters:	MESH_OT_extrude_faces_indiv (`MESH_OT_extrude_faces_indiv`, (optional)) – Extrude Individual Faces, Extrude individual faces only TRANSFORM_OT_shrink_fatten (`TRANSFORM_OT_shrink_fatten`, (optional)) – Shrink/Fatten, Shrink/fatten selected vertices along normals

bpy.ops.mesh.extrude_region(mirror=False)¶

Extrude region of faces

Parameters:	mirror (boolean, (optional)) – Mirror Editing

bpy.ops.mesh.extrude_region_move(MESH_OT_extrude_region=None, TRANSFORM_OT_translate=None)¶

Extrude region and move result

Parameters:	MESH_OT_extrude_region (`MESH_OT_extrude_region`, (optional)) – Extrude Region, Extrude region of faces TRANSFORM_OT_translate (`TRANSFORM_OT_translate`, (optional)) – Translate, Translate (move) selected items

bpy.ops.mesh.extrude_region_shrink_fatten(MESH_OT_extrude_region=None, TRANSFORM_OT_shrink_fatten=None)¶

Extrude region and move result

Parameters:	MESH_OT_extrude_region (`MESH_OT_extrude_region`, (optional)) – Extrude Region, Extrude region of faces TRANSFORM_OT_shrink_fatten (`TRANSFORM_OT_shrink_fatten`, (optional)) – Shrink/Fatten, Shrink/fatten selected vertices along normals

bpy.ops.mesh.extrude_repeat(offset=2.0, steps=10)¶

Extrude selected vertices, edges or faces repeatedly

Parameters:	offset (float in [0, inf], (optional)) – Offset steps (int in [0, inf], (optional)) – Steps

bpy.ops.mesh.extrude_vertices_move(MESH_OT_extrude_verts_indiv=None, TRANSFORM_OT_translate=None)¶

Extrude vertices and move result

Parameters:	MESH_OT_extrude_verts_indiv (`MESH_OT_extrude_verts_indiv`, (optional)) – Extrude Only Vertices, Extrude individual vertices only TRANSFORM_OT_translate (`TRANSFORM_OT_translate`, (optional)) – Translate, Translate (move) selected items

bpy.ops.mesh.extrude_verts_indiv(mirror=False)¶

Extrude individual vertices only

Parameters:	mirror (boolean, (optional)) – Mirror Editing

bpy.ops.mesh.face_split_by_edges()¶: Split faces by loose edges

bpy.ops.mesh.faces_mirror_uv(direction='POSITIVE', precision=3)¶

Copy mirror UV coordinates on the X axis based on a mirrored mesh

Parameters:	direction (enum in [‘POSITIVE’, ‘NEGATIVE’], (optional)) – Axis Direction precision (int in [1, 16], (optional)) – Precision, Tolerance for finding vertex duplicates
File:	startup/bl_operators/mesh.py:52

bpy.ops.mesh.faces_select_linked_flat(sharpness=0.0174533)¶

Select linked faces by angle

Parameters:	sharpness (float in [0.000174533, 3.14159], (optional)) – Sharpness

bpy.ops.mesh.faces_shade_flat()¶: Display faces flat

bpy.ops.mesh.faces_shade_smooth()¶: Display faces smooth (using vertex normals)

bpy.ops.mesh.fill(use_beauty=True)¶

Fill a selected edge loop with faces

Parameters:	use_beauty (boolean, (optional)) – Beauty, Use best triangulation division

bpy.ops.mesh.fill_grid(span=1, offset=0, use_interp_simple=False)¶

Fill grid from two loops

Parameters:	span (int in [1, inf], (optional)) – Span, Number of sides (zero disables) offset (int in [-inf, inf], (optional)) – Offset, Number of sides (zero disables) use_interp_simple (boolean, (optional)) – Simple Blending

bpy.ops.mesh.fill_holes(sides=4)¶

Fill in holes (boundary edge loops)

Parameters:	sides (int in [0, inf], (optional)) – Sides, Number of sides in hole required to fill (zero fills all holes)

bpy.ops.mesh.flip_normals()¶: Flip the direction of selected faces’ normals (and of their vertices)

bpy.ops.mesh.hide(unselected=False)¶

Hide (un)selected vertices, edges or faces

Parameters:	unselected (boolean, (optional)) – Unselected, Hide unselected rather than selected

bpy.ops.mesh.inset(use_boundary=True, use_even_offset=True, use_relative_offset=False, use_edge_rail=False, thickness=0.01, depth=0.0, use_outset=False, use_select_inset=False, use_individual=False, use_interpolate=True)¶

Inset new faces into selected faces

Parameters:

use_boundary (boolean, (optional)) – Boundary, Inset face boundaries
use_even_offset (boolean, (optional)) – Offset Even, Scale the offset to give more even thickness
use_relative_offset (boolean, (optional)) – Offset Relative, Scale the offset by surrounding geometry
use_edge_rail (boolean, (optional)) – Edge Rail, Inset the region along existing edges
thickness (float in [0, inf], (optional)) – Thickness
depth (float in [-inf, inf], (optional)) – Depth
use_outset (boolean, (optional)) – Outset, Outset rather than inset
use_select_inset (boolean, (optional)) – Select Outer, Select the new inset faces
use_individual (boolean, (optional)) – Individual, Individual Face Inset
use_interpolate (boolean, (optional)) – Interpolate, Blend face data across the inset

bpy.ops.mesh.intersect(mode='SELECT_UNSELECT', use_separate=True, threshold=1e-06)¶

Cut an intersection into faces

Parameters:	mode (enum in [‘SELECT’, ‘SELECT_UNSELECT’], (optional)) – Source `SELECT` Self Intersect, Self intersect selected faces. `SELECT_UNSELECT` Selected/Unselected, Intersect selected with unselected faces. use_separate (boolean, (optional)) – Separate threshold (float in [0, 0.01], (optional)) – Merge threshold

bpy.ops.mesh.knife_project(cut_through=False)¶

Use other objects outlines & boundaries to project knife cuts

Parameters:	cut_through (boolean, (optional)) – Cut through, Cut through all faces, not just visible ones

bpy.ops.mesh.knife_tool(use_occlude_geometry=True, only_selected=False)¶

Cut new topology

Parameters:	use_occlude_geometry (boolean, (optional)) – Occlude Geometry, Only cut the front most geometry only_selected (boolean, (optional)) – Only Selected, Only cut selected geometry

bpy.ops.mesh.loop_multi_select(ring=False)¶

Select a loop of connected edges by connection type

Parameters:	ring (boolean, (optional)) – Ring

bpy.ops.mesh.loop_select(extend=False, deselect=False, toggle=False, ring=False)¶

Select a loop of connected edges

Parameters:	extend (boolean, (optional)) – Extend Select, Extend the selection deselect (boolean, (optional)) – Deselect, Remove from the selection toggle (boolean, (optional)) – Toggle Select, Toggle the selection ring (boolean, (optional)) – Select Ring, Select ring

bpy.ops.mesh.loop_to_region(select_bigger=False)¶

Select region of faces inside of a selected loop of edges

Parameters:	select_bigger (boolean, (optional)) – Select Bigger, Select bigger regions instead of smaller ones

bpy.ops.mesh.loopcut(number_cuts=1, smoothness=0.0, falloff='ROOT', edge_index=-1, mesh_select_mode_init=(False, False, False))¶

Add a new loop between existing loops

Parameters:

number_cuts (int in [1, inf], (optional)) – Number of Cuts
smoothness (float in [-inf, inf], (optional)) – Smoothness, Smoothness factor
falloff (enum in [‘SMOOTH’, ‘SPHERE’, ‘ROOT’, ‘SHARP’, ‘LINEAR’], (optional)) –
Falloff, Falloff type the feather
- SMOOTH Smooth, Smooth falloff.
- SPHERE Sphere, Spherical falloff.
- ROOT Root, Root falloff.
- SHARP Sharp, Sharp falloff.
- LINEAR Linear, Linear falloff.
edge_index (int in [-1, inf], (optional)) – Number of Cuts

bpy.ops.mesh.loopcut_slide(MESH_OT_loopcut=None, TRANSFORM_OT_edge_slide=None)¶

Cut mesh loop and slide it

Parameters:	MESH_OT_loopcut (`MESH_OT_loopcut`, (optional)) – Loop Cut, Add a new loop between existing loops TRANSFORM_OT_edge_slide (`TRANSFORM_OT_edge_slide`, (optional)) – Edge Slide, Slide an edge loop along a mesh

bpy.ops.mesh.mark_freestyle_edge(clear=False)¶

(Un)mark selected edges as Freestyle feature edges

Parameters:	clear (boolean, (optional)) – Clear

bpy.ops.mesh.mark_freestyle_face(clear=False)¶

(Un)mark selected faces for exclusion from Freestyle feature edge detection

Parameters:	clear (boolean, (optional)) – Clear

bpy.ops.mesh.mark_seam(clear=False)¶

(Un)mark selected edges as a seam

Parameters:	clear (boolean, (optional)) – Clear

bpy.ops.mesh.mark_sharp(clear=False, use_verts=False)¶

(Un)mark selected edges as sharp

Parameters:	clear (boolean, (optional)) – Clear use_verts (boolean, (optional)) – Vertices, Consider vertices instead of edges to select which edges to (un)tag as sharp

bpy.ops.mesh.merge(type='CENTER', uvs=False)¶

Merge selected vertices

Parameters:	type (enum in [‘FIRST’, ‘LAST’, ‘CENTER’, ‘CURSOR’, ‘COLLAPSE’], (optional)) – Type, Merge method to use uvs (boolean, (optional)) – UVs, Move UVs according to merge

bpy.ops.mesh.navmesh_clear()¶: Remove navmesh data from this mesh

bpy.ops.mesh.navmesh_face_add()¶: Add a new index and assign it to selected faces

bpy.ops.mesh.navmesh_face_copy()¶: Copy the index from the active face

bpy.ops.mesh.navmesh_make()¶: Create navigation mesh for selected objects

bpy.ops.mesh.navmesh_reset()¶: Assign a new index to every face

bpy.ops.mesh.noise(factor=0.1)¶

Use vertex coordinate as texture coordinate

Parameters:	factor (float in [-inf, inf], (optional)) – Factor

bpy.ops.mesh.normals_make_consistent(inside=False)¶

Make face and vertex normals point either outside or inside the mesh

Parameters:	inside (boolean, (optional)) – Inside

bpy.ops.mesh.poke(offset=0.0, use_relative_offset=False, center_mode='MEAN_WEIGHTED')¶

Split a face into a fan

Parameters:

offset (float in [-inf, inf], (optional)) – Poke Offset, Poke Offset
use_relative_offset (boolean, (optional)) – Offset Relative, Scale the offset by surrounding geometry
center_mode (enum in [‘MEAN_WEIGHTED’, ‘MEAN’, ‘BOUNDS’], (optional)) –
Poke Center, Poke Face Center Calculation
- MEAN_WEIGHTED Weighted Mean, Weighted Mean Face Center.
- MEAN Mean, Mean Face Center.
- BOUNDS Bounds, Face Bounds Center.

bpy.ops.mesh.primitive_circle_add(vertices=32, radius=1.0, fill_type='NOTHING', view_align=False, enter_editmode=False, location=(0.0, 0.0, 0.0), rotation=(0.0, 0.0, 0.0), layers=(False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False))¶

Construct a circle mesh

Parameters:

vertices (int in [3, inf], (optional)) – Vertices
radius (float in [0, inf], (optional)) – Radius
fill_type (enum in [‘NOTHING’, ‘NGON’, ‘TRIFAN’], (optional)) –
Fill Type
- NOTHING Nothing, Don’t fill at all.
- NGON Ngon, Use ngons.
- TRIFAN Triangle Fan, Use triangle fans.
view_align (boolean, (optional)) – Align to View, Align the new object to the view
enter_editmode (boolean, (optional)) – Enter Editmode, Enter editmode when adding this object
location (float array of 3 items in [-inf, inf], (optional)) – Location, Location for the newly added object
rotation (float array of 3 items in [-inf, inf], (optional)) – Rotation, Rotation for the newly added object
layers (boolean array of 20 items, (optional)) – Layer

bpy.ops.mesh.primitive_cone_add(vertices=32, radius1=1.0, radius2=0.0, depth=2.0, end_fill_type='NGON', view_align=False, enter_editmode=False, location=(0.0, 0.0, 0.0), rotation=(0.0, 0.0, 0.0), layers=(False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False))¶

Construct a conic mesh

Parameters:

vertices (int in [3, inf], (optional)) – Vertices
radius1 (float in [0, inf], (optional)) – Radius 1
radius2 (float in [0, inf], (optional)) – Radius 2
depth (float in [0, inf], (optional)) – Depth
end_fill_type (enum in [‘NOTHING’, ‘NGON’, ‘TRIFAN’], (optional)) –
Base Fill Type
- NOTHING Nothing, Don’t fill at all.
- NGON Ngon, Use ngons.
- TRIFAN Triangle Fan, Use triangle fans.
view_align (boolean, (optional)) – Align to View, Align the new object to the view
enter_editmode (boolean, (optional)) – Enter Editmode, Enter editmode when adding this object
location (float array of 3 items in [-inf, inf], (optional)) – Location, Location for the newly added object
rotation (float array of 3 items in [-inf, inf], (optional)) – Rotation, Rotation for the newly added object
layers (boolean array of 20 items, (optional)) – Layer

bpy.ops.mesh.primitive_cube_add(radius=1.0, view_align=False, enter_editmode=False, location=(0.0, 0.0, 0.0), rotation=(0.0, 0.0, 0.0), layers=(False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False))¶

Construct a cube mesh

Parameters:

radius (float in [0, inf], (optional)) – Radius
view_align (boolean, (optional)) – Align to View, Align the new object to the view
enter_editmode (boolean, (optional)) – Enter Editmode, Enter editmode when adding this object
location (float array of 3 items in [-inf, inf], (optional)) – Location, Location for the newly added object
rotation (float array of 3 items in [-inf, inf], (optional)) – Rotation, Rotation for the newly added object
layers (boolean array of 20 items, (optional)) – Layer

bpy.ops.mesh.primitive_cylinder_add(vertices=32, radius=1.0, depth=2.0, end_fill_type='NGON', view_align=False, enter_editmode=False, location=(0.0, 0.0, 0.0), rotation=(0.0, 0.0, 0.0), layers=(False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False))¶

Construct a cylinder mesh

Parameters:

vertices (int in [3, inf], (optional)) – Vertices
radius (float in [0, inf], (optional)) – Radius
depth (float in [0, inf], (optional)) – Depth
end_fill_type (enum in [‘NOTHING’, ‘NGON’, ‘TRIFAN’], (optional)) –
Cap Fill Type
- NOTHING Nothing, Don’t fill at all.
- NGON Ngon, Use ngons.
- TRIFAN Triangle Fan, Use triangle fans.
view_align (boolean, (optional)) – Align to View, Align the new object to the view
enter_editmode (boolean, (optional)) – Enter Editmode, Enter editmode when adding this object
location (float array of 3 items in [-inf, inf], (optional)) – Location, Location for the newly added object
rotation (float array of 3 items in [-inf, inf], (optional)) – Rotation, Rotation for the newly added object
layers (boolean array of 20 items, (optional)) – Layer

bpy.ops.mesh.primitive_grid_add(x_subdivisions=10, y_subdivisions=10, radius=1.0, view_align=False, enter_editmode=False, location=(0.0, 0.0, 0.0), rotation=(0.0, 0.0, 0.0), layers=(False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False))¶

Construct a grid mesh

Parameters:

x_subdivisions (int in [2, inf], (optional)) – X Subdivisions
y_subdivisions (int in [2, inf], (optional)) – Y Subdivisions
radius (float in [0, inf], (optional)) – Radius
view_align (boolean, (optional)) – Align to View, Align the new object to the view
enter_editmode (boolean, (optional)) – Enter Editmode, Enter editmode when adding this object
location (float array of 3 items in [-inf, inf], (optional)) – Location, Location for the newly added object
rotation (float array of 3 items in [-inf, inf], (optional)) – Rotation, Rotation for the newly added object
layers (boolean array of 20 items, (optional)) – Layer

bpy.ops.mesh.primitive_ico_sphere_add(subdivisions=2, size=1.0, view_align=False, enter_editmode=False, location=(0.0, 0.0, 0.0), rotation=(0.0, 0.0, 0.0), layers=(False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False))¶

Construct an Icosphere mesh

Parameters:

subdivisions (int in [1, inf], (optional)) – Subdivisions
size (float in [0, inf], (optional)) – Size
view_align (boolean, (optional)) – Align to View, Align the new object to the view
enter_editmode (boolean, (optional)) – Enter Editmode, Enter editmode when adding this object
location (float array of 3 items in [-inf, inf], (optional)) – Location, Location for the newly added object
rotation (float array of 3 items in [-inf, inf], (optional)) – Rotation, Rotation for the newly added object
layers (boolean array of 20 items, (optional)) – Layer

bpy.ops.mesh.primitive_monkey_add(radius=1.0, view_align=False, enter_editmode=False, location=(0.0, 0.0, 0.0), rotation=(0.0, 0.0, 0.0), layers=(False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False))¶

Construct a Suzanne mesh

Parameters:

radius (float in [0, inf], (optional)) – Radius
view_align (boolean, (optional)) – Align to View, Align the new object to the view
enter_editmode (boolean, (optional)) – Enter Editmode, Enter editmode when adding this object
location (float array of 3 items in [-inf, inf], (optional)) – Location, Location for the newly added object
rotation (float array of 3 items in [-inf, inf], (optional)) – Rotation, Rotation for the newly added object
layers (boolean array of 20 items, (optional)) – Layer

bpy.ops.mesh.primitive_plane_add(radius=1.0, view_align=False, enter_editmode=False, location=(0.0, 0.0, 0.0), rotation=(0.0, 0.0, 0.0), layers=(False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False))¶

Construct a filled planar mesh with 4 vertices

Parameters:

radius (float in [0, inf], (optional)) – Radius
view_align (boolean, (optional)) – Align to View, Align the new object to the view
enter_editmode (boolean, (optional)) – Enter Editmode, Enter editmode when adding this object
location (float array of 3 items in [-inf, inf], (optional)) – Location, Location for the newly added object
rotation (float array of 3 items in [-inf, inf], (optional)) – Rotation, Rotation for the newly added object
layers (boolean array of 20 items, (optional)) – Layer

bpy.ops.mesh.primitive_torus_add(rotation=(0.0, 0.0, 0.0), location=(0.0, 0.0, 0.0), view_align=False, major_segments=48, minor_segments=12, mode='MAJOR_MINOR', major_radius=1.0, minor_radius=0.25, abso_major_rad=1.25, abso_minor_rad=0.75)¶

Add a torus mesh

Parameters:

rotation (float array of 3 items in [-inf, inf], (optional)) – Rotation
location (float array of 3 items in [-inf, inf], (optional)) – Location
view_align (boolean, (optional)) – Align to View
major_segments (int in [3, 256], (optional)) – Major Segments, Number of segments for the main ring of the torus
minor_segments (int in [3, 256], (optional)) – Minor Segments, Number of segments for the minor ring of the torus
mode (enum in [‘MAJOR_MINOR’, ‘EXT_INT’], (optional)) –
Torus Dimensions
- MAJOR_MINOR Major/Minor, Use the major/minor radii for torus dimensions.
- EXT_INT Exterior/Interior, Use the exterior/interior radii for torus dimensions.
major_radius (float in [0.01, 100], (optional)) – Major Radius, Radius from the origin to the center of the cross sections
minor_radius (float in [0.01, 100], (optional)) – Minor Radius, Radius of the torus’ cross section
abso_major_rad (float in [0.01, 100], (optional)) – Exterior Radius, Total Exterior Radius of the torus
abso_minor_rad (float in [0.01, 100], (optional)) – Interior Radius, Total Interior Radius of the torus

File:

startup/bl_operators/add_mesh_torus.py:195

bpy.ops.mesh.primitive_uv_sphere_add(segments=32, ring_count=16, size=1.0, view_align=False, enter_editmode=False, location=(0.0, 0.0, 0.0), rotation=(0.0, 0.0, 0.0), layers=(False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False))¶

Construct a UV sphere mesh

Parameters:

segments (int in [3, inf], (optional)) – Segments
ring_count (int in [3, inf], (optional)) – Rings
size (float in [0, inf], (optional)) – Size
view_align (boolean, (optional)) – Align to View, Align the new object to the view
enter_editmode (boolean, (optional)) – Enter Editmode, Enter editmode when adding this object
location (float array of 3 items in [-inf, inf], (optional)) – Location, Location for the newly added object
rotation (float array of 3 items in [-inf, inf], (optional)) – Rotation, Rotation for the newly added object
layers (boolean array of 20 items, (optional)) – Layer

bpy.ops.mesh.quads_convert_to_tris(quad_method='BEAUTY', ngon_method='BEAUTY')¶

Triangulate selected faces

Parameters:

quad_method (enum in [‘BEAUTY’, ‘FIXED’, ‘FIXED_ALTERNATE’, ‘SHORTEST_DIAGONAL’], (optional)) –
Quad Method, Method for splitting the quads into triangles
- BEAUTY Beauty , Split the quads in nice triangles, slower method.
- FIXED Fixed, Split the quads on the first and third vertices.
- FIXED_ALTERNATE Fixed Alternate, Split the quads on the 2nd and 4th vertices.
- SHORTEST_DIAGONAL Shortest Diagonal, Split the quads based on the distance between the vertices.
ngon_method (enum in [‘BEAUTY’, ‘CLIP’], (optional)) –
Polygon Method, Method for splitting the polygons into triangles
- BEAUTY Beauty, Arrange the new triangles evenly (slow).
- CLIP Clip, Split the polygons with an ear clipping algorithm.

bpy.ops.mesh.region_to_loop()¶: Select boundary edges around the selected faces

bpy.ops.mesh.remove_doubles(threshold=0.0001, use_unselected=False)¶

Remove duplicate vertices

Parameters:	threshold (float in [1e-06, 50], (optional)) – Merge Distance, Minimum distance between elements to merge use_unselected (boolean, (optional)) – Unselected, Merge selected to other unselected vertices

bpy.ops.mesh.reveal()¶: Reveal all hidden vertices, edges and faces

bpy.ops.mesh.rip(mirror=False, proportional='DISABLED', proportional_edit_falloff='SMOOTH', proportional_size=1.0, release_confirm=False, use_fill=False)¶

Disconnect vertex or edges from connected geometry

Parameters:

mirror (boolean, (optional)) – Mirror Editing
proportional (enum in [‘DISABLED’, ‘ENABLED’, ‘PROJECTED’, ‘CONNECTED’], (optional)) –
Proportional Editing
- DISABLED Disable, Proportional Editing disabled.
- ENABLED Enable, Proportional Editing enabled.
- PROJECTED Projected (2D), Proportional Editing using screen space locations.
- CONNECTED Connected, Proportional Editing using connected geometry only.
proportional_edit_falloff (enum in [‘SMOOTH’, ‘SPHERE’, ‘ROOT’, ‘INVERSE_SQUARE’, ‘SHARP’, ‘LINEAR’, ‘CONSTANT’, ‘RANDOM’], (optional)) –
Proportional Editing Falloff, Falloff type for proportional editing mode
- SMOOTH Smooth, Smooth falloff.
- SPHERE Sphere, Spherical falloff.
- ROOT Root, Root falloff.
- INVERSE_SQUARE Inverse Square, Inverse Square falloff.
- SHARP Sharp, Sharp falloff.
- LINEAR Linear, Linear falloff.
- CONSTANT Constant, Constant falloff.
- RANDOM Random, Random falloff.
proportional_size (float in [1e-05, inf], (optional)) – Proportional Size
release_confirm (boolean, (optional)) – Confirm on Release, Always confirm operation when releasing button
use_fill (boolean, (optional)) – Fill, Fill the ripped region

bpy.ops.mesh.rip_edge(mirror=False, proportional='DISABLED', proportional_edit_falloff='SMOOTH', proportional_size=1.0, release_confirm=False)¶

Extend vertices along the edge closest to the cursor

Parameters:

mirror (boolean, (optional)) – Mirror Editing
proportional (enum in [‘DISABLED’, ‘ENABLED’, ‘PROJECTED’, ‘CONNECTED’], (optional)) –
Proportional Editing
- DISABLED Disable, Proportional Editing disabled.
- ENABLED Enable, Proportional Editing enabled.
- PROJECTED Projected (2D), Proportional Editing using screen space locations.
- CONNECTED Connected, Proportional Editing using connected geometry only.
proportional_edit_falloff (enum in [‘SMOOTH’, ‘SPHERE’, ‘ROOT’, ‘INVERSE_SQUARE’, ‘SHARP’, ‘LINEAR’, ‘CONSTANT’, ‘RANDOM’], (optional)) –
Proportional Editing Falloff, Falloff type for proportional editing mode
- SMOOTH Smooth, Smooth falloff.
- SPHERE Sphere, Spherical falloff.
- ROOT Root, Root falloff.
- INVERSE_SQUARE Inverse Square, Inverse Square falloff.
- SHARP Sharp, Sharp falloff.
- LINEAR Linear, Linear falloff.
- CONSTANT Constant, Constant falloff.
- RANDOM Random, Random falloff.
proportional_size (float in [1e-05, inf], (optional)) – Proportional Size
release_confirm (boolean, (optional)) – Confirm on Release, Always confirm operation when releasing button

bpy.ops.mesh.rip_edge_move(MESH_OT_rip_edge=None, TRANSFORM_OT_translate=None)¶

Extend vertices and move the result

Parameters:	MESH_OT_rip_edge (`MESH_OT_rip_edge`, (optional)) – Extend Vertices, Extend vertices along the edge closest to the cursor TRANSFORM_OT_translate (`TRANSFORM_OT_translate`, (optional)) – Translate, Translate (move) selected items

bpy.ops.mesh.rip_move(MESH_OT_rip=None, TRANSFORM_OT_translate=None)¶

Rip polygons and move the result

Parameters:	MESH_OT_rip (`MESH_OT_rip`, (optional)) – Rip, Disconnect vertex or edges from connected geometry TRANSFORM_OT_translate (`TRANSFORM_OT_translate`, (optional)) – Translate, Translate (move) selected items

bpy.ops.mesh.rip_move_fill(MESH_OT_rip=None, TRANSFORM_OT_translate=None)¶

Rip-fill polygons and move the result

Parameters:	MESH_OT_rip (`MESH_OT_rip`, (optional)) – Rip, Disconnect vertex or edges from connected geometry TRANSFORM_OT_translate (`TRANSFORM_OT_translate`, (optional)) – Translate, Translate (move) selected items

bpy.ops.mesh.screw(steps=9, turns=1, center=(0.0, 0.0, 0.0), axis=(0.0, 0.0, 0.0))¶

Extrude selected vertices in screw-shaped rotation around the cursor in indicated viewport

Parameters:	steps (int in [1, inf], (optional)) – Steps, Steps turns (int in [1, inf], (optional)) – Turns, Turns center (float array of 3 items in [-inf, inf], (optional)) – Center, Center in global view space axis (float array of 3 items in [-inf, inf], (optional)) – Axis, Axis in global view space

bpy.ops.mesh.select_all(action='TOGGLE')¶

(De)select all vertices, edges or faces

Parameters:

action (enum in [‘TOGGLE’, ‘SELECT’, ‘DESELECT’, ‘INVERT’], (optional)) –

Action, Selection action to execute

TOGGLE Toggle, Toggle selection for all elements.
SELECT Select, Select all elements.
DESELECT Deselect, Deselect all elements.
INVERT Invert, Invert selection of all elements.

bpy.ops.mesh.select_axis(mode='POSITIVE', axis='X_AXIS')¶

Select all data in the mesh on a single axis

Parameters:	mode (enum in [‘POSITIVE’, ‘NEGATIVE’, ‘ALIGNED’], (optional)) – Axis Mode, Axis side to use when selecting axis (enum in [‘X_AXIS’, ‘Y_AXIS’, ‘Z_AXIS’], (optional)) – Axis, Select the axis to compare each vertex on

bpy.ops.mesh.select_face_by_sides(number=4, type='EQUAL', extend=True)¶

Select vertices or faces by the number of polygon sides

Parameters:	number (int in [3, inf], (optional)) – Number of Vertices type (enum in [‘LESS’, ‘EQUAL’, ‘GREATER’, ‘NOTEQUAL’], (optional)) – Type, Type of comparison to make extend (boolean, (optional)) – Extend, Extend the selection

bpy.ops.mesh.select_interior_faces()¶: Select faces where all edges have more than 2 face users

bpy.ops.mesh.select_less(use_face_step=True)¶

Deselect vertices, edges or faces at the boundary of each selection region

Parameters:	use_face_step (boolean, (optional)) – Face Step, Connected faces (instead of edges)

bpy.ops.mesh.select_linked(limit=False)¶

Select all vertices linked to the active mesh

Parameters:	limit (boolean, (optional)) – Limit by Seams

bpy.ops.mesh.select_linked_pick(deselect=False, limit=False)¶

(De)select all vertices linked to the edge under the mouse cursor

Parameters:	deselect (boolean, (optional)) – Deselect limit (boolean, (optional)) – Limit by Seams

bpy.ops.mesh.select_loose(extend=False)¶

Select loose geometry based on the selection mode

Parameters:	extend (boolean, (optional)) – Extend, Extend the selection

bpy.ops.mesh.select_mirror(extend=False)¶

Select mesh items at mirrored locations

Parameters:	extend (boolean, (optional)) – Extend, Extend the existing selection

bpy.ops.mesh.select_mode(use_extend=False, use_expand=False, type='VERT', action='TOGGLE')¶

Change selection mode

Parameters:

use_extend (boolean, (optional)) – Extend
use_expand (boolean, (optional)) – Expand
type (enum in [‘VERT’, ‘EDGE’, ‘FACE’], (optional)) – Type
action (enum in [‘DISABLE’, ‘ENABLE’, ‘TOGGLE’], (optional)) –
Action, Selection action to execute
- DISABLE Disable, Disable selected markers.
- ENABLE Enable, Enable selected markers.
- TOGGLE Toggle, Toggle disabled flag for selected markers.

bpy.ops.mesh.select_more(use_face_step=True)¶

Select more vertices, edges or faces connected to initial selection

Parameters:	use_face_step (boolean, (optional)) – Face Step, Connected faces (instead of edges)

bpy.ops.mesh.select_next_loop()¶: Select next edge loop adjacent to a selected loop

bpy.ops.mesh.select_non_manifold(extend=True, use_wire=True, use_boundary=True, use_multi_face=True, use_non_contiguous=True, use_verts=True)¶

Select all non-manifold vertices or edges

Parameters:

extend (boolean, (optional)) – Extend, Extend the selection
use_wire (boolean, (optional)) – Wire, Wire edges
use_boundary (boolean, (optional)) – Boundaries, Boundary edges
use_multi_face (boolean, (optional)) – Multiple Faces, Edges shared by 3+ faces
use_non_contiguous (boolean, (optional)) – Non Contiguous, Edges between faces pointing in alternate directions
use_verts (boolean, (optional)) – Vertices, Vertices connecting multiple face regions

bpy.ops.mesh.select_nth(nth=2, offset=0)¶

Deselect every Nth element starting from the active vertex, edge or face

Parameters:	nth (int in [2, inf], (optional)) – Nth Selection offset (int in [-inf, inf], (optional)) – Offset

bpy.ops.mesh.select_random(percent=50.0, action='SELECT')¶

Randomly select vertices

Parameters:	percent (float in [0, 100], (optional)) – Percent, Percentage of elements to select randomly action (enum in [‘SELECT’, ‘DESELECT’], (optional)) – Action, Selection action to execute `SELECT` Select, Select all elements. `DESELECT` Deselect, Deselect all elements.

bpy.ops.mesh.select_similar(type='NORMAL', compare='EQUAL', threshold=0.0)¶

Select similar vertices, edges or faces by property types

Parameters:

type (enum in [‘NORMAL’, ‘FACE’, ‘VGROUP’, ‘EDGE’, ‘LENGTH’, ‘DIR’, ‘FACE’, ‘FACE_ANGLE’, ‘CREASE’, ‘BEVEL’, ‘SEAM’, ‘SHARP’, ‘FREESTYLE_EDGE’, ‘MATERIAL’, ‘IMAGE’, ‘AREA’, ‘SIDES’, ‘PERIMETER’, ‘NORMAL’, ‘COPLANAR’, ‘SMOOTH’, ‘FREESTYLE_FACE’], (optional)) – Type
compare (enum in [‘EQUAL’, ‘GREATER’, ‘LESS’], (optional)) – Compare
threshold (float in [0, 1], (optional)) – Threshold

bpy.ops.mesh.select_similar_region()¶: Select similar face regions to the current selection

bpy.ops.mesh.select_ungrouped(extend=False)¶

Select vertices without a group

Parameters:	extend (boolean, (optional)) – Extend, Extend the selection

bpy.ops.mesh.separate(type='SELECTED')¶

Separate selected geometry into a new mesh

Parameters:	type (enum in [‘SELECTED’, ‘MATERIAL’, ‘LOOSE’], (optional)) – Type

bpy.ops.mesh.shape_propagate_to_all()¶: Apply selected vertex locations to all other shape keys

bpy.ops.mesh.shortest_path_pick(extend=False)¶

Select shortest path between two selections

Parameters:	extend (boolean, (optional)) – Extend, Extend the selection

bpy.ops.mesh.shortest_path_select(use_length=True)¶

Selected vertex path between two vertices

Parameters:	use_length (boolean, (optional)) – Length, Use length when measuring distance

bpy.ops.mesh.solidify(thickness=0.01)¶

Create a solid skin by extruding, compensating for sharp angles

Parameters:	thickness (float in [-inf, inf], (optional)) – thickness

bpy.ops.mesh.sort_elements(type='VIEW_ZAXIS', elements=set(), reverse=False, seed=0)¶

The order of selected vertices/edges/faces is modified, based on a given method

Parameters:

type (enum in [‘VIEW_ZAXIS’, ‘VIEW_XAXIS’, ‘CURSOR_DISTANCE’, ‘MATERIAL’, ‘SELECTED’, ‘RANDOMIZE’, ‘REVERSE’], (optional)) –
Type, Type of re-ordering operation to apply
- VIEW_ZAXIS View Z Axis, Sort selected elements from farthest to nearest one in current view.
- VIEW_XAXIS View X Axis, Sort selected elements from left to right one in current view.
- CURSOR_DISTANCE Cursor Distance, Sort selected elements from nearest to farthest from 3D cursor.
- MATERIAL Material, Sort selected elements from smallest to greatest material index (faces only!).
- SELECTED Selected, Move all selected elements in first places, preserving their relative order (WARNING: this will affect unselected elements’ indices as well!).
- RANDOMIZE Randomize, Randomize order of selected elements.
- REVERSE Reverse, Reverse current order of selected elements.
elements (enum set in {‘VERT’, ‘EDGE’, ‘FACE’}, (optional)) – Elements, Which elements to affect (vertices, edges and/or faces)
reverse (boolean, (optional)) – Reverse, Reverse the sorting effect
seed (int in [0, inf], (optional)) – Seed, Seed for random-based operations

bpy.ops.mesh.spin(steps=9, dupli=False, angle=1.5708, center=(0.0, 0.0, 0.0), axis=(0.0, 0.0, 0.0))¶

Extrude selected vertices in a circle around the cursor in indicated viewport

Parameters:	steps (int in [0, inf], (optional)) – Steps, Steps dupli (boolean, (optional)) – Dupli, Make Duplicates angle (float in [-inf, inf], (optional)) – Angle, Angle center (float array of 3 items in [-inf, inf], (optional)) – Center, Center in global view space axis (float array of 3 items in [-inf, inf], (optional)) – Axis, Axis in global view space

bpy.ops.mesh.split()¶: Split off selected geometry from connected unselected geometry

bpy.ops.mesh.subdivide(number_cuts=1, smoothness=0.0, quadtri=False, quadcorner='STRAIGHT_CUT', fractal=0.0, fractal_along_normal=0.0, seed=0)¶

Subdivide selected edges

Parameters:

number_cuts (int in [1, inf], (optional)) – Number of Cuts
smoothness (float in [0, inf], (optional)) – Smoothness, Smoothness factor
quadtri (boolean, (optional)) – Quad/Tri Mode, Tries to prevent ngons
quadcorner (enum in [‘INNERVERT’, ‘PATH’, ‘STRAIGHT_CUT’, ‘FAN’], (optional)) – Quad Corner Type, How to subdivide quad corners (anything other than Straight Cut will prevent ngons)
fractal (float in [0, inf], (optional)) – Fractal, Fractal randomness factor
fractal_along_normal (float in [0, 1], (optional)) – Along Normal, Apply fractal displacement along normal only
seed (int in [0, 10000], (optional)) – Random Seed, Seed for the random number generator

bpy.ops.mesh.subdivide_edgering(number_cuts=10, interpolation='PATH', smoothness=1.0, profile_shape_factor=0.0, profile_shape='SMOOTH')¶

Undocumented

Parameters:

number_cuts (int in [0, inf], (optional)) – Number of Cuts
interpolation (enum in [‘LINEAR’, ‘PATH’, ‘SURFACE’], (optional)) – Interpolation, Interpolation method
smoothness (float in [0, inf], (optional)) – Smoothness, Smoothness factor
profile_shape_factor (float in [-inf, inf], (optional)) – Profile Factor
profile_shape (enum in [‘SMOOTH’, ‘SPHERE’, ‘ROOT’, ‘SHARP’, ‘LINEAR’], (optional)) –
Profile Shape, Shape of the profile
- SMOOTH Smooth, Smooth falloff.
- SPHERE Sphere, Spherical falloff.
- ROOT Root, Root falloff.
- SHARP Sharp, Sharp falloff.
- LINEAR Linear, Linear falloff.

bpy.ops.mesh.symmetrize(direction='NEGATIVE_X', threshold=0.0001)¶

Enforce symmetry (both form and topological) across an axis

Parameters:	direction (enum in [‘NEGATIVE_X’, ‘POSITIVE_X’, ‘NEGATIVE_Y’, ‘POSITIVE_Y’, ‘NEGATIVE_Z’, ‘POSITIVE_Z’], (optional)) – Direction, Which sides to copy from and to threshold (float in [0, 10], (optional)) – Threshold

bpy.ops.mesh.symmetry_snap(direction='NEGATIVE_X', threshold=0.05, factor=0.5, use_center=True)¶

Snap vertex pairs to their mirrored locations

Parameters:	direction (enum in [‘NEGATIVE_X’, ‘POSITIVE_X’, ‘NEGATIVE_Y’, ‘POSITIVE_Y’, ‘NEGATIVE_Z’, ‘POSITIVE_Z’], (optional)) – Direction, Which sides to copy from and to threshold (float in [0, 10], (optional)) – Threshold factor (float in [0, 1], (optional)) – Factor use_center (boolean, (optional)) – Center, Snap mid verts to the axis center

bpy.ops.mesh.tris_convert_to_quads(limit=0.698132, uvs=False, vcols=False, sharp=False, materials=False)¶

Join triangles into quads

Parameters:	limit (float in [0, 3.14159], (optional)) – Max Angle, Angle Limit uvs (boolean, (optional)) – Compare UVs vcols (boolean, (optional)) – Compare VCols sharp (boolean, (optional)) – Compare Sharp materials (boolean, (optional)) – Compare Materials

bpy.ops.mesh.unsubdivide(iterations=2)¶

UnSubdivide selected edges & faces

Parameters:	iterations (int in [1, inf], (optional)) – Iterations, Number of times to unsubdivide

bpy.ops.mesh.uv_texture_add()¶: Add UV Map

bpy.ops.mesh.uv_texture_remove()¶: Remove UV Map

bpy.ops.mesh.uvs_reverse()¶: Flip direction of UV coordinates inside faces

bpy.ops.mesh.uvs_rotate(use_ccw=False)¶

Rotate UV coordinates inside faces

Parameters:	use_ccw (boolean, (optional)) – Counter Clockwise

bpy.ops.mesh.vert_connect()¶: Connect selected vertices of faces, splitting the face

bpy.ops.mesh.vert_connect_concave()¶: Make all faces convex

bpy.ops.mesh.vert_connect_nonplanar(angle_limit=0.0872665)¶

Split non-planar faces that exceed the angle threshold

Parameters:	angle_limit (float in [0, 3.14159], (optional)) – Max Angle, Angle limit

bpy.ops.mesh.vert_connect_path()¶: Connect vertices by their selection order, creating edges, splitting faces

bpy.ops.mesh.vertex_color_add()¶: Add vertex color layer

bpy.ops.mesh.vertex_color_remove()¶: Remove vertex color layer

bpy.ops.mesh.vertices_smooth(factor=0.5, repeat=1, xaxis=True, yaxis=True, zaxis=True)¶

Flatten angles of selected vertices

Parameters:	factor (float in [-10, 10], (optional)) – Smoothing, Smoothing factor repeat (int in [1, 1000], (optional)) – Repeat, Number of times to smooth the mesh xaxis (boolean, (optional)) – X-Axis, Smooth along the X axis yaxis (boolean, (optional)) – Y-Axis, Smooth along the Y axis zaxis (boolean, (optional)) – Z-Axis, Smooth along the Z axis

bpy.ops.mesh.vertices_smooth_laplacian(repeat=1, lambda_factor=5e-05, lambda_border=5e-05, use_x=True, use_y=True, use_z=True, preserve_volume=True)¶

Laplacian smooth of selected vertices

Parameters:

repeat (int in [1, 200], (optional)) – Number of iterations to smooth the mesh
lambda_factor (float in [1e-07, 1000], (optional)) – Lambda factor
lambda_border (float in [1e-07, 1000], (optional)) – Lambda factor in border
use_x (boolean, (optional)) – Smooth X Axis, Smooth object along X axis
use_y (boolean, (optional)) – Smooth Y Axis, Smooth object along Y axis
use_z (boolean, (optional)) – Smooth Z Axis, Smooth object along Z axis
preserve_volume (boolean, (optional)) – Preserve Volume, Apply volume preservation after smooth

bpy.ops.mesh.wireframe(use_boundary=True, use_even_offset=True, use_relative_offset=False, use_replace=True, thickness=0.01, offset=0.01, use_crease=False, crease_weight=0.01)¶

Create a solid wire-frame from faces

Parameters:

use_boundary (boolean, (optional)) – Boundary, Inset face boundaries
use_even_offset (boolean, (optional)) – Offset Even, Scale the offset to give more even thickness
use_relative_offset (boolean, (optional)) – Offset Relative, Scale the offset by surrounding geometry
use_replace (boolean, (optional)) – Replace, Remove original faces
thickness (float in [0, inf], (optional)) – Thickness
offset (float in [0, inf], (optional)) – Offset
use_crease (boolean, (optional)) – Crease, Crease hub edges for improved subsurf
crease_weight (float in [0, inf], (optional)) – Crease weight

Mesh Operators¶

Previous topic

Next topic

Navigation

Mesh Operators¶

Previous topic

Next topic

Quick search

Navigation