Viewport Overlays
Riferimento
- Modalità
Tutte le Modalità
- Intestazione
Clicking the icon toggles all overlays in the 3D Viewport. The dropdown button displays a popover with more detailed settings, which are described below.
The available options depend on the mode that the 3D Viewport is in.
Modalità Oggetto
The following options are always present, independent of the current mode. Some of the overlays can be customized in the Viewport Preferences.
Guide
- Griglia
Mostra la griglia in vista laterale ortografica.
- Piano
Show the ground plane in perspective view.
- Asse
Show the X, Y and/or Z axis lines.
- Scala
La distanza tra le linee nella griglia/piano.
- Suddivisione
Il numero di suddivisioni tra le linee della griglia.
- Text Info
Show various bits of information in the top left corner of the viewport.
- View Perspective
Name of the View Perspective, such as «Top Orthographic» or «User Perspective.»
- Playback Frame Rate (FPS)
Displays the Frames Per Second at which the animation is playing. By default, Blender goes through every single frame, which may result in an FPS that’s lower than intended (and the animation playing slower than realtime); the FPS turns red in this case. You can change this behavior in the Playback popover of the Timeline.
- Info Oggetto
Shows the current frame in parentheses, followed by the names of the selected Collection and the active object. When applicable, also shows the selected Shape Key and (in angle brackets) the Marker on the current frame. If the object has a keyframe on the current frame, the Object Info is displayed in yellow.
- Grid Resolution
When the view is aligned to a world axis (see Viewpoint), the Text Info additionally shows the smallest distance between two parallel grid lines.
- Statistics
Show information about the amount of objects and geometry. Note that the counters depend on the current selection. For example, selecting a mesh gives info on the number of vertices, edges, and faces, while selecting a light shows the number of lights in the scene.
Objects – Number of the selected objects and the total count.
Geometry – Displays information about the current scene depending on the mode and object type. This can be the number of vertices, faces, triangles, or bones.
- Anteprima HDRI
Show two spheres, one glossy and one diffuse, to preview the HDRI that’s being used for world lighting. While HDRIs can be used in both the Material Preview and Rendered shading modes, the HDRI Preview overlay is only available in the former.
- Cursore 3D
Show the 3D Cursor.
- Annotazioni
Show annotations.
Oggetti
- Extra
Show objects that don’t have geometry (such as empties, cameras and lights).
- Linee di Relazione
Show dashed lines indicating parent or constraint relationships.
- Contorno Selezionato
Show an outline around selected objects.
- Ossa
Show Bones.
- Percorsi di Movimento
Show the motion path overlay.
- Origine
Show the origins of the selected objects.
- Origine (Tutte)
Show the origins of all objects.
Geometria
- Wireframe
Display mesh edges. Similar to Wireframe Shading, but displays edges on top of existing shading. The value slider adjusts which edges to display: lower values hide edges on surfaces that are almost flat, while a value of 1 shows all edges.
- Opacità
The opacity of the displayed edges, from 0 (invisible) to 1 (fully opaque).
- Fade Inactive Geometry
In modes other than Object Mode, fade out objects that you’re not working on. The slider controls how much they’re faded out.
- Orientamento Faccia
Show faces whose normal is pointing towards the camera in blue, and faces whose normal is pointing away from the camera in red. This lets you quickly check for faces that are oriented incorrectly: the outside surface of an object should typically be all blue.
Motion Tracking
Show the motion tracking overlay.
- Percorso Telecamera
Show the reconstructed camera path.
- Nomi Marcatori
Mostra i nomi per gli oggetti traccia ricostruiti.
- Tracce
Change the display of the reconstructed tracks: plain axes, arrows and so on.
- Dimensione
Cambia la dimensione di visualizzazione delle tracce ricostruite.
Mesh Edit Mode
The following options are available when in Mesh Edit Mode.
- Bordi
Highlight selected and partially selected edges. Only affects vertex and face selection modes, as edges are always highlighted in edge selection mode.
- Facce
Highlight selected faces. Affects all selection modes.
- Centro
Show face center points in solid shading modes. (They’re always shown in wireframe shading mode.)
Only affects face selection mode.
- Pieghe
Visualizza i bordi contrassegnati da una piega per il Modificatore Suddivisione Superficie.
- Acuto
Display sharp edges, used with the Edge Split modifier.
- Angolo
Visualizza i pesi creati per il Modificatore Angolo.
- Cucitura
Display the UV unwrapping seams.
Ombreggiatura
- Hidden Wire
Show only front-facing wireframes. This is useful for a retopology workflow.
Suggerimento
Optimally this could be combined with the X-Ray display setting.
- Pesi Gruppi Vertici
Display weights in Edit Mode.
- Pesi Zero
Display unreferenced and zero-weighted areas in black. This helps to identify areas with very low weights that have been painted onto.
- None
I vertici vengono visualizzati nel solito modo.
- Attivo
Vertices are shown in black if they have no weight in the active vertex group.
- Tutto
Vertices are shown in black if they have no weight in any vertex group.
Analisi mesh
Show the Analisi mesh overlay.
Misurazione
Show numerical measures of the selected elements. The Unità can be set in the Scene properties.
- Lunghezza del bordo
Mostra la lunghezza dei bordi selezionati.
- Angolo Bordo
Mostra l’angolo dei bordi selezionati tra due facce.
- Area Faccia
Mostra l’area delle facce selezionate.
- Angolo Faccia
Mostra l’angolo della faccia selezionata tra gli angoli.
Suggerimento
La geometria collegata alla selezione viene mostrata durante la trasformazione, consentendo di spostare un vertice e vedere, ad esempio, le lunghezze dei bordi collegati.
Nota
These values respect the Transform Space in the Sidebar. Use Global if you want the object’s scale to be applied to the measurements.
Vedi anche
The Measure tool for measuring arbitrary distances and angles.
Normali
Visualizza vertici normali
Mostra le facce normali ai vertici (divisioni normali)
Visualizza Faccia Normali
- Dimensione
La dimensione per mostrare le normali selezionate.
- Constant Screen Size Normals
Keep the size of normals constant in relation to the zoom level.
Sviluppatore
These overlays are only available if Developer Extras is enabled in the Interface Preferences.
- Indici
Display the indices of selected vertices, edges, and faces.
Freestyle
These settings apply to the Freestyle line art renderer.
- Marcatori Bordi
Display Freestyle edge marks.
- Marcatori Faccia
Display Freestyle face marks.
Modalità Scolpitura
Vertex Paint
- Stencil Mask Opacity
Does nothing. (Stencil masks are only available for texture painting.)
- Mostra Fili
Display mesh edges in white (unlike the Wireframe overlay which shows them in black).
Weight Paint
- Opacità
L’opacità della sovrapposizione.
- Pesi Zero
Display unreferenced and zero-weighted areas in black. This helps to identify areas with very low weights that have been painted onto.
- None
I vertici vengono visualizzati nel solito modo.
- Attivo
Vertices are shown in black if they have no weight in the active vertex group.
- Tutto
Vertices are shown in black if they have no weight in any vertex group.
- Mostra Contorni Peso
Mostra le linee di contorno formate da punti con lo stesso peso interpolato.
This visualizes weight variations too small to be seen from colors and can be useful for judging the smoothness and consistency of gradients, e.g. when using smoothing tools and brushes.
- Mostra Fili
Display mesh edges in white (unlike the Wireframe overlay which shows them in black).
Pittura Texture
- Stencil Mask Opacity
Opacity of the stencil mask overlay.
Ossa
- Dissolvenza Geometria
Show the bones on top and face other geometry to the back. The opacity can be controlled with the slider. Only available in Pose Mode.
- Bone Wireframe Opacity
The maximum opacity used for bones drawn in the Wireframe shading mode (or in Solid shading mode with X-Ray active). This is helpful when it is necessary to reduce clutter and focus on the mesh rather than bones.
Grease Pencil
- Onion Skin
Show ghosts of the keyframes before and after the current frame. If Multiframe is enabled, ghosts of the selected keyframes are shown instead. See Onion Skinning.
- Tela
Display a grid over the Grease Pencil drawing plane. The opacity of the grid can be controlled with the slider. When using the Canvas X-Ray option, objects are drawn behind the canvas grid.
- Fade Inactive Layers
Riduce l’opacità di tutti i livelli nell’oggetto diversi da quello attivo. Il fattore di opacità può essere controllato con il cursore.
- Fade Inactive Objects
Cover all of the viewport except the active Grease Pencil object with a full color layer to improve visibility while drawing over complex scenes.
- Dissolvenza Oggetti Grease Pencil
Include o Esclude oggetti Grease Pencil.
- Modifica Linee
Show edit lines in Edit Mode.
- Solo in Multiframe
When Multiframe is enabled and keyframes other than the current frame are selected, strokes on those keyframes are displayed as just their edit lines – the strokes themselves are hidden. Note that this does not affect Onion Skinning.
- Direzione Tratto
Toggle the display of the selected strokes” start points (green) and end points (red) to visualize their direction.
- Nome Materiale
Show material name next to the selected strokes.
- Opacità Vertice
Opacity for vertices (points) and edit lines in Edit Mode.
- Opacità Pittura Vertice
The opacity of the vertex color overlay in Vertex Paint Mode and Draw Mode. Note that in Draw Mode, vertex paint is only visible in the Material Preview and Rendered shading modes by default. To see it in Solid mode, you either need to use Vertex Paint Mode, or set the Color shading setting to Attribute.
- Handles
When Curve Editing is active, this option controls how curves are displayed in the 3D Viewport.
- None
No handles are displayed, only the control points.
- Selected
Only handles for selected control points are displayed.
- Tutto
All the handles are displayed.