Line Art Modifier

The Line Art modifier generates stylized line art from the scene or selected source collection or objects.

注釈

Due to lack of global cache at the moment, each Line Art modifier will run the entire occlusion calculation for itself. So if you have multiple line art modifiers to select different parts of the scene (to apply different styles, etc.), the evaluation will take much longer. There are plans to remedy this in the future, but this is a known limitation for now.

Options(オプション)

../../../_images/grease-pencil_modifiers_generate_line-art_panel.png

The Line Art modifier.

Use Cache

Optimize rendering by using cached scene data from the first line art modifier in the stack. This option has the disadvantage of certain settings becoming unavailable.

This option only available when you have more than one Line Art modifier is the same modifier stack and the modifier is not the first Line Art modifier in the stack.

Source Type

What type of geometry source should line art be generated from.

Scene, Collection, Object

Object/Collection

Based on the source type, collection or object can be selected as source geometry.

Invert Collection Filtering

Select everything except lines from specified collection.

注釈

Line Art will still load and calculate the entire visible scene to produce correct occlusion result, unless specified to do otherwise in object or collection Line Art Usage property.

レイヤー

The Grease Pencil Layers(レイヤー) to put the result in.

Material(マテリアル)

The Grease Pencil Materials(マテリアル) to generate strokes with.

Line Thickness

The strokes generated by line art are given this thickness.

Opacity(不透明度)

The strokes generated by line art are given this Opacity.

Edge Types

Line Art can identify different edge types. Selected edge types will be included in the result.

Illumination Filtering

Select feature lines that comes from lit or shaded regions. Will not affect cast shadow and light contour since they are at the border.

None(なし)

Not filtering any lines based on illumination region.

Illuminated

Only selecting lines from illuminated regions.

Shaded

Only selecting lines from shaded regions.

Illuminated (Enclosed Shapes)

Selecting lines from lit regions, and make the combination of contour, light contour and shadow lines into enclosed shapes.

Create

Contour

Generate strokes from contour lines. Where the edge becomes the separation line of front/backfacing faces. The silhouette can also be inverted by clicking the invert button.

None(なし)

Not filtering any lines based on illumination region.

Illuminated

Only selecting lines from illuminated regions.

Shaded

Only selecting lines from shaded regions.

Illuminated (Enclosed Shapes)

Selecting lines from lit regions, and make the combination of contour, light contour and shadow lines into enclosed shapes.

Crease(クリース)

Generate strokes where the edge angle is small enough.

Crease Threshold

Angles smaller than this will be treated as creases. Crease angle priority: object line art crease override > mesh auto smooth angle > line art default crease.

Intersections(交差)

Generate stokes where lines intersect between faces.

Material Borders

Generate strokes where the edge separates faces with different materials.

Edge Marks(辺マーク)

Generate strokes from freestyle edge marks.

Loose

Generate strokes for edges that do not form a Face.

Light Contour

Generate light/shadow separation lines from a reference Light Object.

Cast Shadow (影のキャスト)

Project contour lines using a light source object.

Options(オプション)

Allow Overlap

Allow an edge to have multiple overlapping types. This will create a separate stroke for each overlapping type.

Light Reference

Light Object

Use this light object to generate :ref:Light Contour <bpy.types.LineartGpencilModifier.use_light_contour>.

Shadow Camera Size

This value represent the "Orthographic Scale" of an ortho camera. If the camera is put at the lamps position with this scale, it will represent the coverage of the shadow "camera".

Near(接近)

Near clipping distance of shadow camera.

Far(最遠)

Far clipping distance of shadow camera

Geometry Processing

Custom Camera

Use custom camera instead of the active camera for calculating strokes. Useful when baking multiple shots in different angle as well as for motion graphics effects.

Overlapping Edges as Contour

This option allows overlapping edges (e.g. from an Edge Split modifier or imported geometry where two edges occupy the exact same space) to be drawn as contour. Enabling this option will slow down the calculation slightly but it will handle edge overlapping cases without erroneous occlusion results.

Instanced Objects

This option enables particles and other instanced objects to be loaded for line art calculation. There will be performance impact when there are a large amount of instanced objects in the scene.

Clipping Boundaries

When enabled, line art will generate clipping lines as contour type at the place where near or far clipping planes cut the model. Otherwise there will be no lines.

Crease on Smooth

Allow crease edges to show inside smooth surfaces.

Crease on Sharp

Allow creases to show on sharp edges.

Force Backface Culling

Remove all back faces to speed up calculation. Note, removing back faces will create edges in different occlusion levels than when disabled.

Occlusion

../../../_images/grease-pencil_modifiers_generate_line-art_occlusion-panel.png

Occlusion subpanel.

Range (範囲)

If enabled, the modifier will select lines that have an occlusion level between start and end values.

Level(レベル)

Desired occlusion level to be selected as line art result. A value of 0 means visible lines (no occlusion). A value of 1 means selecting lines that have been occluded by exactly one layer of faces.

Material Mask

If enabled, Line Art will only select lines that are occluded by certain faces whose material have specific occlusion masks set.

Masks(マスク)

To select edges that have been occluded by the selected Material Mask.

Exact Match(完全に一致)

If enabled, only lines that are occluded with the exact mask bit combination will be selected. Otherwise, lines that have been occluded by any one of specified material masks will be selected.

../../../_images/grease-pencil_modifiers_generate_line-art_transparency-mask.png

Demonstration of the usage of material masks.

Intersection

Allows you to select edges that intersect between two collections.

Collection Mask(コレクションマスク)

Mask bits to match from Collection Line Art properties.

Exact Match(完全に一致)

Require matching all intersection masks instead of just one.

../../../_images/grease-pencil_modifiers_generate_line-art_collection-mask.png

Demonstration of the usage of collection masks.

Face Mark Filtering

../../../_images/grease-pencil_modifiers_generate_line-art_face-mark-filtering-panel.png

Face Mark Filtering subpanel.

Face Mark Filtering can be used to have manual control over which feature edges produce strokes by using Freestyle face marks.

Invert(反転)

Invert face mark filtering.

Boundaries(境界)

Filter feature lines based on face mark boundaries.

Keep Contour

Preserve contour lines while filtering.

../../../_images/grease-pencil_modifiers_generate_line-art_face-mark-filtering-example.png

Chaining

../../../_images/grease-pencil_modifiers_generate_line-art_chaining-panel.png

Chaining subpanel.

Chain
Intersection with Contour

Allows intersection lines to be chained together with contour lines.

注釈

Enabling this option will lead to ambiguity in intersection edge types. Intersection lines that have not been able to chain with any nearby contour lines will remain as intersection lines.

All Lines

Enabling this option will cause all lines to have the type of contour and to be chained together.

Loose Edges

Allow floating Edges that do not form a face to be chained together.

Loose Edges as Contour

Edges that do not form a face will be classified as contour lines.

Preserve Details

Instead of splitting at each occlusion change, keep small details from the initial chain. When details are not kept, will create a much smoother result.

Geometry Space

Use geometry distance for chaining instead of image space.

Image Threshold

Allow the end point of short segments to be chained together if the 2D image space distance between them are within the specified threshold.

Smooth Tolerance

The strength of smoothing applied on jagged chains.

Angle Splitting

Split a chain at sharp "turning" points specified by this angle.

Vertex Weight Transfer

../../../_images/grease-pencil_modifiers_generate_line-art_vertex-weight-panel.png

Vertex Weight Transfer subpanel.

Filter Source

If source mesh has vertex groups whose name starts with this text, then the vertex weight info will be transferred into weight groups in Grease Pencil strokes.

Match Output

Transfer the filtered object vertex weights into Grease Pencil weight groups with the same names as the filtered ones.

Target(ターゲット)

If Match Output is off, then a target vertex group has to be specified. If there are multiple weight groups copied into target, then the highest weight value is copied into it.

Composition

../../../_images/grease-pencil_modifiers_generate_line-art_composition-panel.png

Composition subpanel.

Overscan(オーバースキャン)

To optimize rendering, Blender only renders the strokes for edges of the object that are in the camera's view. This optimization however, can result in strokes ending abruptly at the edge of the image.

This value prevents this error by adding a margin outside the camera's view to continue computing strokes.

Image Boundary Trimming

Trim all stroke right at the boundary of image (including overscan region).

Depth Offset

Move strokes slightly towards the camera to avoid clipping while preserve depth for the viewport. This option is unavailable unless Show in Front is disabled.

Towards Custom Camera

Offset strokes towards selected camera (see Custom Camera above) instead of the active camera.

Bake(ベイク)

../../../_images/grease-pencil_modifiers_generate_line-art_baking-panel.png

Bake options.

Bake Line Art

Bakes Line Art strokes for active Grease Pencil object within the start, end frame range in scene. Bake Line Art (All) bakes all Grease Pencil objects that contains at least one Line Art modifier. After baking, baked Line Art modifiers will be deactivated automatically.

Clear Baked Line Art

Clears baked line art frames within the scene frame range for active Grease Pencil object. Clear Baked Line Art (All) applies the same operation for all Grease Pencil objects that contains at least one Line Art modifier.

警告

If you have drawn anything manually in the frame range of where line art runs, this operation will also clear those strokes!

Continue without Clearing

Re-activate a specific Line Art modifier without clearing baked strokes. This is useful for working on multiple portions of frames separately.