Stroke Menu

This page covers many of the tools in the Strokes menu. These are tools that work primarily on strokes, however, some also work with point selections.

Subdivide

Справка

Mode:: Режим редактирования
Меню:: Stroke ‣ Subdivide

Subdivides the strokes by inserting points between the selected points.

Number of Cuts (число разрезов): The number of subdivisions to perform.
Smooth: The amount of the smoothness on subdivided points.
Repeat (повторение): Number of times to repeat the procedure.
Selected Points: When enabled, limits the effect to only the selected points within the stroke.
Position (положение): When enabled, the operator affect the points location.
Толщина: When enabled, the operator affect the points thickness.
Strength (сила): When enabled, the operator affect the points strength (alpha).
UVs: When enabled, the operator affect the UV rotation on the points.

Simplify

Справка

Mode:: Режим редактирования
Меню:: Stroke ‣ Simplify

Reduce the amount of points in the strokes.

Fixed (фиксировано)

Deletes alternated points in the strokes, except the start and end points.

Steps: The number of times to repeat the procedure.

Адаптивно

Uses the RDP algorithm (Ramer-Douglas-Peucker algorithm) for points deletion. The algorithm tries to obtain a similar line shape with fewer points.

Factor: Controls the amount of recursively simplifications applied by the algorithm.

Sample

Recreates the stroke geometry with a predefined length between points.

Length: The distance between points on the recreated stroke. Smaller values will require more points to recreate the stroke, while larger values will result in fewer points needed to recreate the curve.
Sharp Threshold: The maximum angle between points on the recreated stroke. Smaller values will require more points to recreate the stroke, while larger values will result in fewer points needed to recreate the curve.

Trim

Справка

Mode:: Режим редактирования
Меню:: Stroke ‣ Trim

Trims selected stroke to first loop or intersection.

../../../_images/grease-pencil_modes_edit_stroke-menu_trim-1.png — Original stroke.

../../../_images/grease-pencil_modes_edit_stroke-menu_trim-2.png — Result of trim operation.

Outline

Справка

Mode:: Режим редактирования
Меню:: Stroke ‣ Outline

Converts a stroke to an outline.

View

The projection method to generate the outline

View:: Use the viewport’s view as a projection.
Спереди:: Use the X-Z axes view as a projection.
Side:: use the Y-Z axis view as a projection
Top (сверху):: Use the X-Y axes view as a projection
Камера:: Use the view from the active camera as a projection.

Material Mode

How materials are assigned to the outline.

Active Material:: The stroke outline will be assigned the active material.
Keep Material:: The stoke outline will have the same material as before.
New Material:: A new material will be created and assigned to the outline.

Толщина

Thickness of the stroke perimeter.

Keep Shape

Try to keep global shape when the stroke thickness change.

Subdivisions (подразделения)

Number of subdivisions for the start and end caps.

Sample Length

The length each resulting segment of the outline. Smaller values create outlines closer to the original shape.

../../../_images/grease-pencil_modes_edit_stroke-menu_outline-1.png — Original stroke.

../../../_images/grease-pencil_modes_edit_stroke-menu_outline-2.png — Generated stroke after outline operation.

Join

Справка

Mode:: Режим редактирования
Меню:: Stroke ‣ Join ‣ Join, Join and Copy
Горячая клавиша:: Ctrl-J, Shift-Ctrl-J

Join two or more strokes into a single one.

Type

Join Ctrl-J: Join selected strokes by connecting points.
Join and Copy Shift-Ctrl-J: Join selected strokes by connecting points in a new stroke.

Leave Gaps

When enabled, do not use geometry to connect the strokes.

Move to Layer

Справка

Mode:: Режим редактирования
Меню:: Stroke ‣ Move to Layer
Горячая клавиша:: M

A pop-up menu to move the stroke to a different layer. You can choose the layer to move the selected strokes to from a list of layers of the current Grease Pencil object. You can also add a new layer to move the selected stroke to. When creating a new layer, there is another pop-up to type in the name of the new layer.

Assign Material

Справка

Mode:: Режим редактирования
Меню:: Stroke ‣ Assign Material

Changes the material linked to the selected stroke. You can choose the name of the material to be used by the selected stroke from a list of materials of the current Grease Pencil object.

Set as Active Material

Справка

Mode:: Режим редактирования
Меню:: Stroke ‣ Set as Active Material

Sets the active object material based on the selected stroke material.

Arrange

Справка

Mode:: Режим редактирования
Меню:: Stroke ‣ Arrange

Change the drawing order of the strokes in the 2D layer.

Bring to Front: Moves to the top the selected points/strokes.
Bring Forward: Moves the selected points/strokes upper the next one in the drawing order.
Send Backward: Moves the selected points/strokes below the previous one in the drawing order.
Send to Back: Moves to the bottom the selected points/strokes.

Close

Справка

Mode:: Режим редактирования
Меню:: Stroke ‣ Close
Горячая клавиша:: F

Close or open strokes by connecting the last and first point.

Type

Close All: Close all open selected strokes.
Open All: Open all closed selected strokes.
Toggle: Close or Open selected strokes as required.

Create Geometry

When enabled, points are added for closing the strokes. If disabled, the operator act the same as Toggle Cyclic.

Toggle Cyclic

Справка

Mode:: Режим редактирования
Меню:: Stroke ‣ Toggle Cyclic

Toggles between an open stroke and closed stroke (cyclic).

Type

Close All: Close all open selected strokes.
Open All: Open all closed selected strokes.
Toggle: Close or Open selected strokes as required.
Create Geometry: When enabled, points are added for closing the strokes like when using the Close tool. If disabled, the stroke is close without any actual geometry.

Toggle Caps

Справка

Mode:: Режим редактирования
Меню:: Stroke ‣ Toggle Caps

Toggle ending cap styles of the stroke.

Default (по умолчанию): Sets stroke start and end points to rounded (default).
Both: Toggle stroke start and end points caps to flat or rounded.
Start (начало): Toggle stroke start point cap to flat or rounded.
End: Toggle stroke end point cap to flat or rounded.

../../../_images/grease-pencil_modes_edit_stroke-menu_cap-1.png — Stroke ending with rounded caps.

../../../_images/grease-pencil_modes_edit_stroke-menu_cap-2.png — Stroke ending with flat caps.

../../../_images/grease-pencil_modes_edit_stroke-menu_cap-3.png — Stroke ending with combined caps.

Switch Direction

Справка

Mode:: Режим редактирования
Меню:: Stroke ‣ Switch Direction

Reverse the direction of the points in the selected strokes (i.e. the start point will become the end one, and vice versa).

Set Start Point

Справка

Mode:: Режим редактирования
Меню:: Stroke ‣ Set Start Point

Set the start point for cyclic strokes.

Normalize Thickness

Справка

Mode:: Режим редактирования
Меню:: Stroke ‣ Normalize Thickness

Makes the thickness equal for the entire stroke.

Mode: Stroke Property to normalize.
Value: Thickness value to use on all points of the stroke.

Normalize Opacity

Справка

Mode:: Режим редактирования
Меню:: Stroke ‣ Normalize Opacity

Makes the opacity equal for the entire stroke.

Mode: Stroke Property to normalize.
Value: Opacity value to use on all points of the stroke.

Scale Thickness

Справка

Mode:: Режим редактирования
Меню:: Stroke ‣ Scale Thickness

When enabled, scales the stroke thickness during scale transformations.

Reset Fill Transform

Справка

Mode:: Режим редактирования
Меню:: Stroke ‣ Reset Fill Transform

Reset all fill translation, scaling and rotations in the selected strokes.