操作#

本节将解释各种 操作 的作用。你可以在前一页(开始之前)的表格中看到编辑模式和物体模式的全部可用选项。

Cursor 游标:#

它可以通过 绝对 坐标、 Delta 坐标、 方向 坐标以及相对于其当前位置或 活动 顶点或对象来放置光标。

轴心点:#

它可以通过 绝对 坐标、 三角 坐标、 方向 坐标以及相对于其当前位置或 活动 顶点或物体来放置游标。

移除:#

该操作涉及到 移动 几何体,或根据各种操作符移动对象。几何体可以通过 "绝对 坐标三角 坐标、 方向 坐标移动。在编辑模式下,选定的几何体被移动,在物体模式下选定的物体被移动。

Example 1: Move selected geometry 0.8 units at 34 degrees in front view, Set Operation to Move, set Working Plane to Front(X-Z), set Distance to 0.8, set angle to 34, select geometry, click Direction button.

../../../_images/addons_pdt_design_18.png

你可以看到移动之前和之后的几何图形。

新建点:#

这个操作涉及到根据各种运算符放置一个 新顶点 ,新顶点被设置为选定的,这样它就可以被操作了。

Example 1: Place a New Vertex and the intersection of two edges, set Operation to New Vertex, set Working Plane to Front(X-Z), select two edges, click Intersect button.

../../../_images/addons_pdt_design_19.png

一个新的顶点已经被放置在两条边的交汇处。

挤出点:#

这个操作只 挤出 所选几何体的顶点,所以如果你选择一个面,并使用这个操作,只有面的顶点会被挤出。这也可以用来围绕一个路径 追逐 一个顶点,例如一个复杂支架的边缘。

例子1 : 挤出一个面的顶点,设置操作为 挤出顶点 ,选择该面,设置一些三角偏移,点击 三角 按钮。

../../../_images/addons_pdt_design_20.png

只有面的顶点被挤压成了边。

拆分边:#

This operation will Split edges according to the operator you use. It will result in the face having one more vertex per operation, so a quad becomes a 5 sided Ngon. This initial split point is halfway along the chosen edge(s). If the system detects that you are going to split connecting edges of a face, which would ruin the topology, an error is given and the operation does not complete.

例子1 : 在一个面的边上分割25%,将操作设置为 分割 ,将百分比设置为25,选择一条边,点击 百分比 按钮。

Example 2: Split two edges of an extruded prism and move the split 0.8 in X, 0.4 in Z, set Operation to Split, set Working Plane to Front(X-Z), set X to 0.8 & Z to 0.4, select two edges, click Delta button.

../../../_images/addons_pdt_design_21.png

你可以看到上述两个例子的之前和之后。

复制几何体:#

这一操作将根据所选择的操作者来复制几何图形。

例子1 : 复制 选定的几何体在前视图中以78度复制3个单位,将操作设置为 复制几何体 ,将工作平面设置为 正面(X-Z) ,将距离设置为3和角度设置为78,点击 方向 按钮。

../../../_images/addons_pdt_design_22.png

你可以看到复制前和复制后的状态。

挤出几何体:#

这个操作将 挤出 的几何体,不仅仅是像挤出顶点那样挤出顶点,而且还有面和边。

Example 1: Extrude selected face 1 in X, 0.5 in Y and 0.6 in Z, set Operation to Extrude Geometry, set Working Plane to Front(X-Z), set X, Y & Z to 1,0.5,0.6 respectively, click Delta button.

../../../_images/addons_pdt_design_23.png

你可以看到顶面已经在所有三个轴上被挤压成一个操作。