DataTransferModifier(Modifier)

base classes — bpy_struct, Modifier

class bpy.types.DataTransferModifier(Modifier)

Modifier transferring some data from a source mesh

data_types_edges

Which edge data layers to transfer

  • SHARP_EDGE Sharp, Transfer sharp mark.
  • SEAM UV Seam, Transfer UV seam mark.
  • CREASE Subsurf Crease, Transfer crease values.
  • BEVEL_WEIGHT_EDGE Bevel Weight, Transfer bevel weights.
  • FREESTYLE_EDGE Freestyle Mark, Transfer Freestyle edge mark.
Type:enum set in {‘SHARP_EDGE’, ‘SEAM’, ‘CREASE’, ‘BEVEL_WEIGHT_EDGE’, ‘FREESTYLE_EDGE’}, default {‘SHARP_EDGE’}
data_types_loops

Which face corner data layers to transfer

  • CUSTOM_NORMAL Custom Normals, Transfer custom normals.
  • VCOL VCol, Vertex (face corners) colors.
  • UV UVs, Transfer UV layers.
Type:enum set in {‘CUSTOM_NORMAL’, ‘VCOL’, ‘UV’}, default {‘CUSTOM_NORMAL’}
data_types_polys

Which poly data layers to transfer

  • SMOOTH Smooth, Transfer flat/smooth mark.
  • FREESTYLE_FACE Freestyle Mark, Transfer Freestyle face mark.
Type:enum set in {‘SMOOTH’, ‘FREESTYLE_FACE’}, default {‘SMOOTH’}
data_types_verts

Which vertex data layers to transfer

  • VGROUP_WEIGHTS Vertex Group(s), Transfer active or all vertex groups.
  • BEVEL_WEIGHT_VERT Bevel Weight, Transfer bevel weights.
Type:enum set in {‘VGROUP_WEIGHTS’, ‘BEVEL_WEIGHT_VERT’}, default {‘VGROUP_WEIGHTS’}
edge_mapping

Method used to map source edges to destination ones

  • TOPOLOGY Topology, Copy from identical topology meshes.
  • VERT_NEAREST Nearest Vertices, Copy from most similar edge (edge which vertices are the closest of destination edge’s ones).
  • NEAREST Nearest Edge, Copy from closest edge (using midpoints).
  • POLY_NEAREST Nearest Face Edge, Copy from closest edge of closest face (using midpoints).
  • EDGEINTERP_VNORPROJ Projected Edge Interpolated, Interpolate all source edges hit by the projection of destination one along its own normal (from vertices).
Type:enum in [‘TOPOLOGY’, ‘VERT_NEAREST’, ‘NEAREST’, ‘POLY_NEAREST’, ‘EDGEINTERP_VNORPROJ’], default ‘NEAREST’
invert_vertex_group

Invert vertex group influence

Type:boolean, default False
islands_precision

Factor controlling precision of islands handling (typically, 0.1 should be enough, higher values can make things really slow)

Type:float in [0, 1], default 0.0
layers_uv_select_dst

How to match source and destination layers

  • ACTIVE Active Layer, Affect active data layer of all targets.
  • NAME By Name, Match target data layers to affect by name.
  • INDEX By Order, Match target data layers to affect by order (indices).
Type:enum in [‘ACTIVE’, ‘NAME’, ‘INDEX’], default ‘NAME’
layers_uv_select_src

Which layers to transfer, in case of multi-layers types

  • ACTIVE Active Layer, Only transfer active data layer.
  • ALL All Layers, Transfer all data layers.
  • BONE_SELECT Selected Pose Bones, Transfer all vertex groups used by selected pose bones.
  • BONE_DEFORM Deform Pose Bones, Transfer all vertex groups used by deform bones.
Type:enum in [‘ACTIVE’, ‘ALL’, ‘BONE_SELECT’, ‘BONE_DEFORM’], default ‘ALL’
layers_vcol_select_dst

How to match source and destination layers

  • ACTIVE Active Layer, Affect active data layer of all targets.
  • NAME By Name, Match target data layers to affect by name.
  • INDEX By Order, Match target data layers to affect by order (indices).
Type:enum in [‘ACTIVE’, ‘NAME’, ‘INDEX’], default ‘NAME’
layers_vcol_select_src

Which layers to transfer, in case of multi-layers types

  • ACTIVE Active Layer, Only transfer active data layer.
  • ALL All Layers, Transfer all data layers.
  • BONE_SELECT Selected Pose Bones, Transfer all vertex groups used by selected pose bones.
  • BONE_DEFORM Deform Pose Bones, Transfer all vertex groups used by deform bones.
Type:enum in [‘ACTIVE’, ‘ALL’, ‘BONE_SELECT’, ‘BONE_DEFORM’], default ‘ALL’
layers_vgroup_select_dst

How to match source and destination layers

  • ACTIVE Active Layer, Affect active data layer of all targets.
  • NAME By Name, Match target data layers to affect by name.
  • INDEX By Order, Match target data layers to affect by order (indices).
Type:enum in [‘ACTIVE’, ‘NAME’, ‘INDEX’], default ‘NAME’
layers_vgroup_select_src

Which layers to transfer, in case of multi-layers types

  • ACTIVE Active Layer, Only transfer active data layer.
  • ALL All Layers, Transfer all data layers.
  • BONE_SELECT Selected Pose Bones, Transfer all vertex groups used by selected pose bones.
  • BONE_DEFORM Deform Pose Bones, Transfer all vertex groups used by deform bones.
Type:enum in [‘ACTIVE’, ‘ALL’, ‘BONE_SELECT’, ‘BONE_DEFORM’], default ‘ALL’
loop_mapping

Method used to map source faces’ corners to destination ones

  • TOPOLOGY Topology, Copy from identical topology meshes.
  • NEAREST_NORMAL Nearest Corner And Best Matching Normal, Copy from nearest corner which has the best matching normal.
  • NEAREST_POLYNOR Nearest Corner And Best Matching Face Normal, Copy from nearest corner which has the face with the best matching normal to destination corner’s face one.
  • NEAREST_POLY Nearest Corner Of Nearest Face, Copy from nearest corner of nearest polygon.
  • POLYINTERP_NEAREST Nearest Face Interpolated, Copy from interpolated corners of the nearest source polygon.
  • POLYINTERP_LNORPROJ Projected Face Interpolated, Copy from interpolated corners of the source polygon hit by corner normal projection.
Type:enum in [‘TOPOLOGY’, ‘NEAREST_NORMAL’, ‘NEAREST_POLYNOR’, ‘NEAREST_POLY’, ‘POLYINTERP_NEAREST’, ‘POLYINTERP_LNORPROJ’], default ‘NEAREST_POLYNOR’
max_distance

Maximum allowed distance between source and destination element, for non-topology mappings

Type:float in [0, inf], default 1.0
mix_factor

Factor to use when applying data to destination (exact behavior depends on mix mode)

Type:float in [0, 1], default 1.0
mix_mode

How to affect destination elements with source values

  • REPLACE Replace, Overwrite all elements’ data.
  • ABOVE_THRESHOLD Above Threshold, Only replace destination elements where data is above given threshold (exact behavior depends on data type).
  • BELOW_THRESHOLD Below Threshold, Only replace destination elements where data is below given threshold (exact behavior depends on data type).
  • MIX Mix, Mix source value into destination one, using given threshold as factor.
  • ADD Add, Add source value to destination one, using given threshold as factor.
  • SUB Subtract, Subtract source value to destination one, using given threshold as factor.
  • MUL Multiply, Multiply source value to destination one, using given threshold as factor.
Type:enum in [‘REPLACE’, ‘ABOVE_THRESHOLD’, ‘BELOW_THRESHOLD’, ‘MIX’, ‘ADD’, ‘SUB’, ‘MUL’], default ‘REPLACE’
object

Object to transfer data from

Type:Object
poly_mapping

Method used to map source faces to destination ones

  • TOPOLOGY Topology, Copy from identical topology meshes.
  • NEAREST Nearest Face, Copy from nearest polygon (using center points).
  • NORMAL Best Normal-Matching, Copy from source polygon which normal is the closest to destination one.
  • POLYINTERP_PNORPROJ Projected Face Interpolated, Interpolate all source polygons intersected by the projection of destination one along its own normal.
Type:enum in [‘TOPOLOGY’, ‘NEAREST’, ‘NORMAL’, ‘POLYINTERP_PNORPROJ’], default ‘NEAREST’
ray_radius

‘Width’ of rays (especially useful when raycasting against vertices or edges)

Type:float in [0, inf], default 0.0
use_edge_data

Enable edge data transfer

Type:boolean, default False
use_loop_data

Enable face corner data transfer

Type:boolean, default False
use_max_distance

Source elements must be closer than given distance from destination one

Type:boolean, default False
use_object_transform

Evaluate source and destination meshes in global space

Type:boolean, default True
use_poly_data

Enable face data transfer

Type:boolean, default False
use_vert_data

Enable vertex data transfer

Type:boolean, default False
vert_mapping

Method used to map source vertices to destination ones

  • TOPOLOGY Topology, Copy from identical topology meshes.
  • NEAREST Nearest vertex, Copy from closest vertex.
  • EDGE_NEAREST Nearest Edge Vertex, Copy from closest vertex of closest edge.
  • EDGEINTERP_NEAREST Nearest Edge Interpolated, Copy from interpolated values of vertices from closest point on closest edge.
  • POLY_NEAREST Nearest Face Vertex, Copy from closest vertex of closest face.
  • POLYINTERP_NEAREST Nearest Face Interpolated, Copy from interpolated values of vertices from closest point on closest face.
  • POLYINTERP_VNORPROJ Projected Face Interpolated, Copy from interpolated values of vertices from point on closest face hit by normal-projection.
Type:enum in [‘TOPOLOGY’, ‘NEAREST’, ‘EDGE_NEAREST’, ‘EDGEINTERP_NEAREST’, ‘POLY_NEAREST’, ‘POLYINTERP_NEAREST’, ‘POLYINTERP_VNORPROJ’], default ‘NEAREST’
vertex_group

Vertex group name for selecting the affected areas

Type:string, default “”, (never None)
classmethod bl_rna_get_subclass(id, default=None)
Parameters:id (string) – The RNA type identifier.
Returns:The RNA type or default when not found.
Return type:bpy.types.Struct subclass
classmethod bl_rna_get_subclass_py(id, default=None)
Parameters:id (string) – The RNA type identifier.
Returns:The class or default when not found.
Return type:type

Inherited Properties

Inherited Functions