BrushGpencilSettings(bpy_struct)
base class — bpy_struct
- class bpy.types.BrushGpencilSettings(bpy_struct)
Settings for grease pencil brush
- active_smooth_factor
Amount of smoothing while drawing
- Type
float in [0, 1], default 0.0
- angle
Direction of the stroke at which brush gives maximal thickness (0° for horizontal)
- Type
float in [-1.5708, 1.5708], default 0.0
- angle_factor
Reduce brush thickness by this factor when stroke is perpendicular to ‘Angle’ direction
- Type
float in [0, 1], default 0.0
- aspect
- Type
float array of 2 items in [0.01, 1], default (1.0, 1.0)
- brush_draw_mode
Preselected mode when using this brush
ACTIVE
Active – Use current mode.MATERIAL
Material – Use always material mode.VERTEXCOLOR
Vertex Color – Use always Vertex Color mode.
- Type
enum in [‘ACTIVE’, ‘MATERIAL’, ‘VERTEXCOLOR’], default ‘ACTIVE’
- caps_type
The shape of the start and end of the stroke
- Type
enum in [‘ROUND’, ‘FLAT’], default ‘ROUND’
- curve_jitter
Curve used for the jitter effect
- Type
CurveMapping
, (readonly)
- curve_random_hue
Curve used for modulating effect
- Type
CurveMapping
, (readonly)
- curve_random_pressure
Curve used for modulating effect
- Type
CurveMapping
, (readonly)
- curve_random_saturation
Curve used for modulating effect
- Type
CurveMapping
, (readonly)
- curve_random_strength
Curve used for modulating effect
- Type
CurveMapping
, (readonly)
- curve_random_uv
Curve used for modulating effect
- Type
CurveMapping
, (readonly)
- curve_random_value
Curve used for modulating effect
- Type
CurveMapping
, (readonly)
- curve_sensitivity
Curve used for the sensitivity
- Type
CurveMapping
, (readonly)
- curve_strength
Curve used for the strength
- Type
CurveMapping
, (readonly)
- dilate
Number of pixels to expand or contract fill area
- Type
int in [-40, 40], default 1
- direction
ADD
Add – Add effect of brush.SUBTRACT
Subtract – Subtract effect of brush.
- Type
enum in [‘ADD’, ‘SUBTRACT’], default ‘ADD’
- eraser_mode
Eraser Mode
SOFT
Dissolve – Erase strokes, fading their points strength and thickness.HARD
Point – Erase stroke points.STROKE
Stroke – Erase entire strokes.
- Type
enum in [‘SOFT’, ‘HARD’, ‘STROKE’], default ‘SOFT’
- eraser_strength_factor
Amount of erasing for strength
- Type
float in [0, 100], default 0.0
- eraser_thickness_factor
Amount of erasing for thickness
- Type
float in [0, 100], default 0.0
- extend_stroke_factor
Strokes end extension for closing gaps, use zero to disable
- Type
float in [0, 10], default 0.0
- fill_direction
Direction of the fill
NORMAL
Normal – Fill internal area.INVERT
Inverted – Fill inverted area.
- Type
enum in [‘NORMAL’, ‘INVERT’], default ‘NORMAL’
- fill_draw_mode
Mode to draw boundary limits
BOTH
All – Use both visible strokes and edit lines as fill boundary limits.STROKE
Strokes – Use visible strokes as fill boundary limits.CONTROL
Edit Lines – Use edit lines as fill boundary limits.
- Type
enum in [‘BOTH’, ‘STROKE’, ‘CONTROL’], default ‘BOTH’
- fill_factor
Factor for fill boundary accuracy, higher values are more accurate but slower
- Type
float in [0.05, 8], default 0.0
- fill_layer_mode
Layers used as boundaries
VISIBLE
Visible – Visible layers.ACTIVE
Active – Only active layer.ABOVE
Layer Above – Layer above active.BELOW
Layer Below – Layer below active.ALL_ABOVE
All Above – All layers above active.ALL_BELOW
All Below – All layers below active.
- Type
enum in [‘VISIBLE’, ‘ACTIVE’, ‘ABOVE’, ‘BELOW’, ‘ALL_ABOVE’, ‘ALL_BELOW’], default ‘VISIBLE’
- fill_leak
Size in pixels to consider the leak closed
- Type
int in [0, 100], default 0
- fill_simplify_level
Number of simplify steps (large values reduce fill accuracy)
- Type
int in [0, 10], default 0
- fill_threshold
Threshold to consider color transparent for filling
- Type
float in [0, 1], default 0.0
- gpencil_paint_icon
- Type
enum in [‘PENCIL’, ‘PEN’, ‘INK’, ‘INKNOISE’, ‘BLOCK’, ‘MARKER’, ‘AIRBRUSH’, ‘CHISEL’, ‘FILL’, ‘SOFT’, ‘HARD’, ‘STROKE’], default ‘PENCIL’
- gpencil_sculpt_icon
- Type
enum in [‘SMOOTH’, ‘THICKNESS’, ‘STRENGTH’, ‘RANDOMIZE’, ‘GRAB’, ‘PUSH’, ‘TWIST’, ‘PINCH’, ‘CLONE’], default ‘SMOOTH’
- gpencil_vertex_icon
- Type
enum in [‘DRAW’, ‘BLUR’, ‘AVERAGE’, ‘SMEAR’, ‘REPLACE’], default ‘DRAW’
- gpencil_weight_icon
- Type
enum in [‘DRAW’], default ‘DRAW’
- hardness
Gradient from the center of Dot and Box strokes (set to 1 for a solid stroke)
- Type
float in [0.001, 1], default 1.0
- input_samples
Generate intermediate points for very fast mouse movements. Set to 0 to disable
- Type
int in [0, 10], default 0
- pen_jitter
Jitter factor for new strokes
- Type
float in [0, 1], default 0.0
- pen_smooth_factor
Amount of smoothing to apply after finish newly created strokes, to reduce jitter/noise
- Type
float in [0, 2], default 0.0
- pen_smooth_steps
Number of times to smooth newly created strokes
- Type
int in [1, 3], default 0
- pen_strength
Color strength for new strokes (affect alpha factor of color)
- Type
float in [0, 1], default 0.0
- pen_subdivision_steps
Number of times to subdivide newly created strokes, for less jagged strokes
- Type
int in [0, 3], default 0
- pin_draw_mode
Pin the mode to the brush
- Type
boolean, default False
- random_hue_factor
Random factor to modify original hue
- Type
float in [0, 1], default 0.0
- random_pressure
Randomness factor for pressure in new strokes
- Type
float in [0, 1], default 0.0
- random_saturation_factor
Random factor to modify original saturation
- Type
float in [0, 1], default 0.0
- random_strength
Randomness factor strength in new strokes
- Type
float in [0, 1], default 0.0
- random_value_factor
Random factor to modify original value
- Type
float in [0, 1], default 0.0
- show_fill
Show transparent lines to use as boundary for filling
- Type
boolean, default True
- show_fill_boundary
Show help lines for filling to see boundaries
- Type
boolean, default True
- show_fill_extend
Show help lines for stroke extension
- Type
boolean, default True
- show_lasso
Do not display fill color while drawing the stroke
- Type
boolean, default False
- simplify_factor
Factor of Simplify using adaptive algorithm
- Type
float in [0, 100], default 0.0
- use_default_eraser
Use this brush when enable eraser with fast switch key
- Type
boolean, default True
- use_edit_position
The brush affects the position of the point
- Type
boolean, default False
- use_edit_strength
The brush affects the color strength of the point
- Type
boolean, default False
- use_edit_thickness
The brush affects the thickness of the point
- Type
boolean, default False
- use_edit_uv
The brush affects the UV rotation of the point
- Type
boolean, default False
- use_fill_limit
Fill only visible areas in viewport
- Type
boolean, default True
- use_jitter_pressure
Use tablet pressure for jitter
- Type
boolean, default False
- use_material_pin
Keep material assigned to brush
- Type
boolean, default False
- use_occlude_eraser
Erase only strokes visible and not occluded
- Type
boolean, default False
- use_pressure
Use tablet pressure
- Type
boolean, default False
- use_random_press_hue
Use pressure to modulate randomness
- Type
boolean, default False
- use_random_press_radius
Use pressure to modulate randomness
- Type
boolean, default False
- use_random_press_sat
Use pressure to modulate randomness
- Type
boolean, default False
- use_random_press_strength
Use pressure to modulate randomness
- Type
boolean, default False
- use_random_press_uv
Use pressure to modulate randomness
- Type
boolean, default False
- use_random_press_val
Use pressure to modulate randomness
- Type
boolean, default False
- use_settings_postprocess
Additional post processing options for new strokes
- Type
boolean, default False
- use_settings_random
Random brush settings
- Type
boolean, default False
- use_settings_stabilizer
Draw lines with a delay to allow smooth strokes. Press Shift key to override while drawing
- Type
boolean, default True
- use_strength_pressure
Use tablet pressure for color strength
- Type
boolean, default False
- use_stroke_random_hue
Use randomness at stroke level
- Type
boolean, default False
- use_stroke_random_radius
Use randomness at stroke level
- Type
boolean, default False
- use_stroke_random_sat
Use randomness at stroke level
- Type
boolean, default False
- use_stroke_random_strength
Use randomness at stroke level
- Type
boolean, default False
- use_stroke_random_uv
Use randomness at stroke level
- Type
boolean, default False
- use_stroke_random_val
Use randomness at stroke level
- Type
boolean, default False
- use_trim
Trim intersecting stroke ends
- Type
boolean, default False
- uv_random
Random factor for auto-generated UV rotation
- Type
float in [0, 1], default 0.0
- vertex_color_factor
Factor used to mix vertex color to get final color
- Type
float in [0, 1], default 0.0
- vertex_mode
Defines how vertex color affect to the strokes
STROKE
Stroke – Vertex Color affects to Stroke only.FILL
Fill – Vertex Color affects to Fill only.BOTH
Stroke & Fill – Vertex Color affects to Stroke and Fill.
- Type
enum in [‘STROKE’, ‘FILL’, ‘BOTH’], default ‘STROKE’
- classmethod bl_rna_get_subclass(id, default=None)
- Parameters
id (string) – The RNA type identifier.
- Returns
The RNA type or default when not found.
- Return type
bpy.types.Struct
subclass
- classmethod bl_rna_get_subclass_py(id, default=None)
- Parameters
id (string) – The RNA type identifier.
- Returns
The class or default when not found.
- Return type
type
Inherited Properties
Inherited Functions
References