TransformConstraint(Constraint)
base classes — bpy_struct
, Constraint
- class bpy.types.TransformConstraint(Constraint)
Map transformations of the target to the object
- from_max_x
Top range of X axis source motion
- Type
float in [-inf, inf], default 0.0
- from_max_x_rot
Top range of X axis source motion
- Type
float in [-inf, inf], default 0.0
- from_max_x_scale
Top range of X axis source motion
- Type
float in [-inf, inf], default 0.0
- from_max_y
Top range of Y axis source motion
- Type
float in [-inf, inf], default 0.0
- from_max_y_rot
Top range of Y axis source motion
- Type
float in [-inf, inf], default 0.0
- from_max_y_scale
Top range of Y axis source motion
- Type
float in [-inf, inf], default 0.0
- from_max_z
Top range of Z axis source motion
- Type
float in [-inf, inf], default 0.0
- from_max_z_rot
Top range of Z axis source motion
- Type
float in [-inf, inf], default 0.0
- from_max_z_scale
Top range of Z axis source motion
- Type
float in [-inf, inf], default 0.0
- from_min_x
Bottom range of X axis source motion
- Type
float in [-inf, inf], default 0.0
- from_min_x_rot
Bottom range of X axis source motion
- Type
float in [-inf, inf], default 0.0
- from_min_x_scale
Bottom range of X axis source motion
- Type
float in [-inf, inf], default 0.0
- from_min_y
Bottom range of Y axis source motion
- Type
float in [-inf, inf], default 0.0
- from_min_y_rot
Bottom range of Y axis source motion
- Type
float in [-inf, inf], default 0.0
- from_min_y_scale
Bottom range of Y axis source motion
- Type
float in [-inf, inf], default 0.0
- from_min_z
Bottom range of Z axis source motion
- Type
float in [-inf, inf], default 0.0
- from_min_z_rot
Bottom range of Z axis source motion
- Type
float in [-inf, inf], default 0.0
- from_min_z_scale
Bottom range of Z axis source motion
- Type
float in [-inf, inf], default 0.0
- from_rotation_mode
Specify the type of rotation channels to use
AUTO
Auto Euler – Euler using the rotation order of the target.XYZ
XYZ Euler – Euler using the XYZ rotation order.XZY
XZY Euler – Euler using the XZY rotation order.YXZ
YXZ Euler – Euler using the YXZ rotation order.YZX
YZX Euler – Euler using the YZX rotation order.ZXY
ZXY Euler – Euler using the ZXY rotation order.ZYX
ZYX Euler – Euler using the ZYX rotation order.QUATERNION
Quaternion – Quaternion rotation.SWING_TWIST_X
Swing and X Twist – Decompose into a swing rotation to aim the X axis, followed by twist around it.SWING_TWIST_Y
Swing and Y Twist – Decompose into a swing rotation to aim the Y axis, followed by twist around it.SWING_TWIST_Z
Swing and Z Twist – Decompose into a swing rotation to aim the Z axis, followed by twist around it.
- Type
enum in [‘AUTO’, ‘XYZ’, ‘XZY’, ‘YXZ’, ‘YZX’, ‘ZXY’, ‘ZYX’, ‘QUATERNION’, ‘SWING_TWIST_X’, ‘SWING_TWIST_Y’, ‘SWING_TWIST_Z’], default ‘AUTO’
- map_from
The transformation type to use from the target
- Type
enum in [‘LOCATION’, ‘ROTATION’, ‘SCALE’], default ‘LOCATION’
- map_to
The transformation type to affect of the constrained object
- Type
enum in [‘LOCATION’, ‘ROTATION’, ‘SCALE’], default ‘LOCATION’
- map_to_x_from
The source axis constrained object’s X axis uses
- Type
enum in [‘X’, ‘Y’, ‘Z’], default ‘X’
- map_to_y_from
The source axis constrained object’s Y axis uses
- Type
enum in [‘X’, ‘Y’, ‘Z’], default ‘X’
- map_to_z_from
The source axis constrained object’s Z axis uses
- Type
enum in [‘X’, ‘Y’, ‘Z’], default ‘X’
- mix_mode
Specify how to combine the new location with original
REPLACE
Replace – Replace component values.ADD
Add – Add component values together.
- Type
enum in [‘REPLACE’, ‘ADD’], default ‘ADD’
- mix_mode_rot
Specify how to combine the new rotation with original
REPLACE
Replace – Replace component values.ADD
Add – Add component values together.BEFORE
Before Original – Apply new rotation before original, as if it was on a parent.AFTER
After Original – Apply new rotation after original, as if it was on a child.
- Type
enum in [‘REPLACE’, ‘ADD’, ‘BEFORE’, ‘AFTER’], default ‘ADD’
- mix_mode_scale
Specify how to combine the new scale with original
REPLACE
Replace – Replace component values.MULTIPLY
Multiply – Multiply component values together.
- Type
enum in [‘REPLACE’, ‘MULTIPLY’], default ‘REPLACE’
- subtarget
Armature bone, mesh or lattice vertex group, …
- Type
string, default “”, (never None)
- to_euler_order
Explicitly specify the output euler rotation order
AUTO
Default – Euler using the default rotation order.XYZ
XYZ Euler – Euler using the XYZ rotation order.XZY
XZY Euler – Euler using the XZY rotation order.YXZ
YXZ Euler – Euler using the YXZ rotation order.YZX
YZX Euler – Euler using the YZX rotation order.ZXY
ZXY Euler – Euler using the ZXY rotation order.ZYX
ZYX Euler – Euler using the ZYX rotation order.
- Type
enum in [‘AUTO’, ‘XYZ’, ‘XZY’, ‘YXZ’, ‘YZX’, ‘ZXY’, ‘ZYX’], default ‘AUTO’
- to_max_x
Top range of X axis destination motion
- Type
float in [-inf, inf], default 0.0
- to_max_x_rot
Top range of X axis destination motion
- Type
float in [-inf, inf], default 0.0
- to_max_x_scale
Top range of X axis destination motion
- Type
float in [-inf, inf], default 0.0
- to_max_y
Top range of Y axis destination motion
- Type
float in [-inf, inf], default 0.0
- to_max_y_rot
Top range of Y axis destination motion
- Type
float in [-inf, inf], default 0.0
- to_max_y_scale
Top range of Y axis destination motion
- Type
float in [-inf, inf], default 0.0
- to_max_z
Top range of Z axis destination motion
- Type
float in [-inf, inf], default 0.0
- to_max_z_rot
Top range of Z axis destination motion
- Type
float in [-inf, inf], default 0.0
- to_max_z_scale
Top range of Z axis destination motion
- Type
float in [-inf, inf], default 0.0
- to_min_x
Bottom range of X axis destination motion
- Type
float in [-inf, inf], default 0.0
- to_min_x_rot
Bottom range of X axis destination motion
- Type
float in [-inf, inf], default 0.0
- to_min_x_scale
Bottom range of X axis destination motion
- Type
float in [-inf, inf], default 0.0
- to_min_y
Bottom range of Y axis destination motion
- Type
float in [-inf, inf], default 0.0
- to_min_y_rot
Bottom range of Y axis destination motion
- Type
float in [-inf, inf], default 0.0
- to_min_y_scale
Bottom range of Y axis destination motion
- Type
float in [-inf, inf], default 0.0
- to_min_z
Bottom range of Z axis destination motion
- Type
float in [-inf, inf], default 0.0
- to_min_z_rot
Bottom range of Z axis destination motion
- Type
float in [-inf, inf], default 0.0
- to_min_z_scale
Bottom range of Z axis destination motion
- Type
float in [-inf, inf], default 0.0
- use_motion_extrapolate
Extrapolate ranges
- Type
boolean, default False
- classmethod bl_rna_get_subclass(id, default=None)
- Parameters
id (string) – The RNA type identifier.
- Returns
The RNA type or default when not found.
- Return type
bpy.types.Struct
subclass
- classmethod bl_rna_get_subclass_py(id, default=None)
- Parameters
id (string) – The RNA type identifier.
- Returns
The class or default when not found.
- Return type
type
Inherited Properties
Inherited Functions