Gpencil Operators

bpy.ops.gpencil.active_frame_delete()

Delete the active frame for the active Grease Pencil Layer

bpy.ops.gpencil.active_frames_delete_all()

Delete the active frame(s) of all editable Grease Pencil layers

bpy.ops.gpencil.annotate(mode='DRAW', stroke=None, wait_for_input=True)

Make annotations on the active data

Parameters:
  • mode (enum in ['DRAW', 'DRAW_STRAIGHT', 'DRAW_POLY', 'ERASER'], (optional)) –

    Mode, Way to interpret mouse movements

    • DRAW Draw Freehand, Draw freehand stroke(s).
    • DRAW_STRAIGHT Draw Straight Lines, Draw straight line segment(s).
    • DRAW_POLY Draw Poly Line, Click to place endpoints of straight line segments (connected).
    • ERASER Eraser, Erase Annotation strokes.
  • stroke (bpy_prop_collection of OperatorStrokeElement, (optional)) – Stroke
  • wait_for_input (boolean, (optional)) – Wait for Input, Wait for first click instead of painting immediately
bpy.ops.gpencil.blank_frame_add(all_layers=False)

Insert a blank frame on the current frame (all subsequently existing frames, if any, are shifted right by one frame)

Parameters:all_layers (boolean, (optional)) – All Layers, Create blank frame in all layers, not only active
bpy.ops.gpencil.brush_presets_create()

Create a set of predefined Grease Pencil drawing brushes

bpy.ops.gpencil.color_hide(unselected=False)

Hide selected/unselected Grease Pencil colors

Parameters:unselected (boolean, (optional)) – Unselected, Hide unselected rather than selected colors
bpy.ops.gpencil.color_isolate(affect_visibility=False)

Toggle whether the active color is the only one that is editable and/or visible

Parameters:affect_visibility (boolean, (optional)) – Affect Visibility, In addition to toggling the editability, also affect the visibility
bpy.ops.gpencil.color_lock_all()

Lock all Grease Pencil colors to prevent them from being accidentally modified

bpy.ops.gpencil.color_reveal()

Unhide all hidden Grease Pencil colors

bpy.ops.gpencil.color_select(deselect=False)

Select all Grease Pencil strokes using current color

Parameters:deselect (boolean, (optional)) – Deselect, Unselect strokes
bpy.ops.gpencil.color_unlock_all()

Unlock all Grease Pencil colors so that they can be edited

bpy.ops.gpencil.convert(type='PATH', use_normalize_weights=True, radius_multiplier=1.0, use_link_strokes=False, timing_mode='FULL', frame_range=100, start_frame=1, use_realtime=False, end_frame=250, gap_duration=0.0, gap_randomness=0.0, seed=0, use_timing_data=False)

Convert the active Grease Pencil layer to a new Curve Object

Parameters:
  • type (enum in ['PATH', 'CURVE', 'POLY'], (optional)) –

    Type, Which type of curve to convert to

    • PATH Path, Animation path.
    • CURVE Bezier Curve, Smooth Bezier curve.
    • POLY Polygon Curve, Bezier curve with straight-line segments (vector handles).
  • use_normalize_weights (boolean, (optional)) – Normalize Weight, Normalize weight (set from stroke width)
  • radius_multiplier (float in [0, 1000], (optional)) – Radius Fac, Multiplier for the points’ radii (set from stroke width)
  • use_link_strokes (boolean, (optional)) – Link Strokes, Whether to link strokes with zero-radius sections of curves
  • timing_mode (enum in ['NONE', 'LINEAR', 'FULL', 'CUSTOMGAP'], (optional)) –

    Timing Mode, How to use timing data stored in strokes

    • NONE No Timing, Ignore timing.
    • LINEAR Linear, Simple linear timing.
    • FULL Original, Use the original timing, gaps included.
    • CUSTOMGAP Custom Gaps, Use the original timing, but with custom gap lengths (in frames).
  • frame_range (int in [1, 10000], (optional)) – Frame Range, The duration of evaluation of the path control curve
  • start_frame (int in [1, 100000], (optional)) – Start Frame, The start frame of the path control curve
  • use_realtime (boolean, (optional)) – Realtime, Whether the path control curve reproduces the drawing in realtime, starting from Start Frame
  • end_frame (int in [1, 100000], (optional)) – End Frame, The end frame of the path control curve (if Realtime is not set)
  • gap_duration (float in [0, 10000], (optional)) – Gap Duration, Custom Gap mode: (Average) length of gaps, in frames (Note: Realtime value, will be scaled if Realtime is not set)
  • gap_randomness (float in [0, 10000], (optional)) – Gap Randomness, Custom Gap mode: Number of frames that gap lengths can vary
  • seed (int in [0, 1000], (optional)) – Random Seed, Custom Gap mode: Random generator seed
  • use_timing_data (boolean, (optional)) – Has Valid Timing, Whether the converted Grease Pencil layer has valid timing data (internal use)
bpy.ops.gpencil.convert_old_files(annotation=False)

Convert 2.7x grease pencil files to 2.80

Parameters:annotation (boolean, (optional)) – Annotation, Convert to Annotations
bpy.ops.gpencil.copy()

Copy selected Grease Pencil points and strokes

bpy.ops.gpencil.data_add()

Add new Grease Pencil data-block

Unlink active Annotation data-block

bpy.ops.gpencil.delete(type='POINTS')

Delete selected Grease Pencil strokes, vertices, or frames

Parameters:type (enum in ['POINTS', 'STROKES', 'FRAME'], (optional)) –

Type, Method used for deleting Grease Pencil data

  • POINTS Points, Delete selected points and split strokes into segments.
  • STROKES Strokes, Delete selected strokes.
  • FRAME Frame, Delete active frame.
bpy.ops.gpencil.dissolve(type='POINTS')

Delete selected points without splitting strokes

Parameters:type (enum in ['POINTS', 'BETWEEN', 'UNSELECT'], (optional)) –

Type, Method used for dissolving Stroke points

  • POINTS Dissolve, Dissolve selected points.
  • BETWEEN Dissolve Between, Dissolve points between selected points.
  • UNSELECT Dissolve Unselect, Dissolve all unselected points.
bpy.ops.gpencil.draw(mode='DRAW', stroke=None, wait_for_input=True, disable_straight=False, disable_fill=False, guide_last_angle=0.0)

Draw a new stroke in the active Grease Pencil Object

Parameters:
  • mode (enum in ['DRAW', 'DRAW_STRAIGHT', 'DRAW_POLY', 'ERASER'], (optional)) –

    Mode, Way to interpret mouse movements

    • DRAW Draw Freehand, Draw freehand stroke(s).
    • DRAW_STRAIGHT Draw Straight Lines, Draw straight line segment(s).
    • DRAW_POLY Draw Poly Line, Click to place endpoints of straight line segments (connected).
    • ERASER Eraser, Erase Grease Pencil strokes.
  • stroke (bpy_prop_collection of OperatorStrokeElement, (optional)) – Stroke
  • wait_for_input (boolean, (optional)) – Wait for Input, Wait for first click instead of painting immediately
  • disable_straight (boolean, (optional)) – No Straight lines, Disable key for straight lines
  • disable_fill (boolean, (optional)) – No Fill Areas, Disable fill to use stroke as fill boundary
  • guide_last_angle (float in [-10000, 10000], (optional)) – Angle, Speed guide angle
bpy.ops.gpencil.duplicate()

Duplicate the selected Grease Pencil strokes

bpy.ops.gpencil.duplicate_move(GPENCIL_OT_duplicate=None, TRANSFORM_OT_translate=None)

Make copies of the selected Grease Pencil strokes and move them

Parameters:
  • GPENCIL_OT_duplicate (GPENCIL_OT_duplicate, (optional)) – Duplicate Strokes, Duplicate the selected Grease Pencil strokes
  • TRANSFORM_OT_translate (TRANSFORM_OT_translate, (optional)) – Move, Move selected items
bpy.ops.gpencil.editmode_toggle(back=False)

Enter/Exit edit mode for Grease Pencil strokes

Parameters:back (boolean, (optional)) – Return to Previous Mode, Return to previous mode
bpy.ops.gpencil.extrude()

Extrude the selected Grease Pencil points

bpy.ops.gpencil.extrude_move(GPENCIL_OT_extrude=None, TRANSFORM_OT_translate=None)

Extrude selected points and move them

Parameters:
  • GPENCIL_OT_extrude (GPENCIL_OT_extrude, (optional)) – Extrude Stroke Points, Extrude the selected Grease Pencil points
  • TRANSFORM_OT_translate (TRANSFORM_OT_translate, (optional)) – Move, Move selected items
bpy.ops.gpencil.fill(on_back=False)

Fill with color the shape formed by strokes

Parameters:on_back (boolean, (optional)) – Draw On Back, Send new stroke to Back
bpy.ops.gpencil.frame_clean_fill(mode='ACTIVE')

Remove ‘no fill’ boundary strokes

Parameters:mode (enum in ['ACTIVE', 'ALL'], (optional)) –

Mode

  • ACTIVE Active Frame Only, Clean active frame only.
  • ALL All Frames, Clean all frames in all layers.
bpy.ops.gpencil.frame_clean_loose(limit=1)

Remove loose points

Parameters:limit (int in [1, inf], (optional)) – Limit, Number of points to consider stroke as loose
bpy.ops.gpencil.frame_duplicate(mode='ACTIVE')

Make a copy of the active Grease Pencil Frame

Parameters:mode (enum in ['ACTIVE', 'ALL'], (optional)) –

Mode

  • ACTIVE Active, Duplicate frame in active layer only.
  • ALL All, Duplicate active frames in all layers.
bpy.ops.gpencil.generate_weights(mode='NAME', armature='DEFAULT', ratio=0.1, decay=0.8)

Generate automatic weights for armatures (requires armature modifier)

Parameters:
  • mode (enum in ['NAME', 'AUTO'], (optional)) – Mode
  • armature (enum in ['DEFAULT'], (optional)) – Armature, Armature to use
  • ratio (float in [0, 2], (optional)) – Ratio, Ratio between bone length and influence radius
  • decay (float in [0, 1], (optional)) – Decay, Factor to reduce influence depending of distance to bone axis
bpy.ops.gpencil.guide_rotate(increment=True, angle=0.0)

Rotate guide angle

Parameters:
  • increment (boolean, (optional)) – Increment, Increment angle
  • angle (float in [-10000, 10000], (optional)) – Angle, Guide angle
bpy.ops.gpencil.hide(unselected=False)

Hide selected/unselected Grease Pencil layers

Parameters:unselected (boolean, (optional)) – Unselected, Hide unselected rather than selected layers
bpy.ops.gpencil.interpolate(shift=0.0)

Interpolate grease pencil strokes between frames

Parameters:shift (float in [-1, 1], (optional)) – Shift, Bias factor for which frame has more influence on the interpolated strokes
bpy.ops.gpencil.interpolate_reverse()

Remove breakdown frames generated by interpolating between two Grease Pencil frames

bpy.ops.gpencil.interpolate_sequence()

Generate ‘in-betweens’ to smoothly interpolate between Grease Pencil frames

bpy.ops.gpencil.layer_add()

Add new layer or note for the active data-block

bpy.ops.gpencil.layer_change(layer='DEFAULT')

Change active Grease Pencil layer

Parameters:layer (enum in ['DEFAULT'], (optional)) – Grease Pencil Layer
bpy.ops.gpencil.layer_duplicate()

Make a copy of the active Grease Pencil layer

bpy.ops.gpencil.layer_duplicate_object(object="", mode='ALL')

Make a copy of the active Grease Pencil layer to new object

Parameters:
  • object (string, (optional, never None)) – Object, Name of the destination object
  • mode (enum in ['ALL', 'ACTIVE'], (optional)) – Mode
bpy.ops.gpencil.layer_isolate(affect_visibility=False)

Toggle whether the active layer is the only one that can be edited and/or visible

Parameters:affect_visibility (boolean, (optional)) – Affect Visibility, In addition to toggling the editability, also affect the visibility
bpy.ops.gpencil.layer_merge()

Merge the current layer with the layer below

bpy.ops.gpencil.layer_move(type='UP')

Move the active Grease Pencil layer up/down in the list

Parameters:type (enum in ['UP', 'DOWN'], (optional)) – Type
bpy.ops.gpencil.layer_remove()

Remove active Grease Pencil layer

bpy.ops.gpencil.lock_all()

Lock all Grease Pencil layers to prevent them from being accidentally modified

bpy.ops.gpencil.lock_layer()

Lock and hide any color not used in any layer

bpy.ops.gpencil.move_to_layer(layer='DEFAULT')

Move selected strokes to another layer

Parameters:layer (enum in ['DEFAULT'], (optional)) – Grease Pencil Layer
bpy.ops.gpencil.paintmode_toggle(back=False)

Enter/Exit paint mode for Grease Pencil strokes

Parameters:back (boolean, (optional)) – Return to Previous Mode, Return to previous mode
bpy.ops.gpencil.paste(type='COPY')

Paste previously copied strokes or copy and merge in active layer

Parameters:type (enum in ['COPY', 'MERGE'], (optional)) – Type
bpy.ops.gpencil.primitive(edges=4, type='BOX', wait_for_input=True)

Create predefined grease pencil stroke shapes

Parameters:
  • edges (int in [2, 128], (optional)) – Edges, Number of polygon edges
  • type (enum in ['BOX', 'LINE', 'CIRCLE', 'ARC', 'CURVE'], (optional)) – Type, Type of shape
  • wait_for_input (boolean, (optional)) – Wait for Input
bpy.ops.gpencil.reproject(type='VIEW')

Reproject the selected strokes from the current viewpoint as if they had been newly drawn (e.g. to fix problems from accidental 3D cursor movement or accidental viewport changes, or for matching deforming geometry)

Parameters:type (enum in ['FRONT', 'SIDE', 'TOP', 'VIEW', 'SURFACE', 'CURSOR'], (optional)) –

Projection Type

  • FRONT Front, Reproject the strokes using the X-Z plane.
  • SIDE Side, Reproject the strokes using the Y-Z plane.
  • TOP Top, Reproject the strokes using the X-Y plane.
  • VIEW View, Reproject the strokes to end up on the same plane, as if drawn from the current viewpoint using ‘Cursor’ Stroke Placement.
  • SURFACE Surface, Reproject the strokes on to the scene geometry, as if drawn using ‘Surface’ placement.
  • CURSOR Cursor, Reproject the strokes using the orientation of 3D cursor.
bpy.ops.gpencil.reveal(select=True)

Show all Grease Pencil layers

Parameters:select (boolean, (optional)) – Select
bpy.ops.gpencil.sculpt_paint(stroke=None, wait_for_input=True)

Apply tweaks to strokes by painting over the strokes

Parameters:
  • stroke (bpy_prop_collection of OperatorStrokeElement, (optional)) – Stroke
  • wait_for_input (boolean, (optional)) – Wait for Input, Enter a mini ‘sculpt-mode’ if enabled, otherwise, exit after drawing a single stroke
bpy.ops.gpencil.sculptmode_toggle(back=False)

Enter/Exit sculpt mode for Grease Pencil strokes

Parameters:back (boolean, (optional)) – Return to Previous Mode, Return to previous mode
bpy.ops.gpencil.select(extend=False, deselect=False, toggle=False, deselect_all=False, entire_strokes=False, location=(0, 0))

Select Grease Pencil strokes and/or stroke points

Parameters:
  • extend (boolean, (optional)) – Extend, Extend selection instead of deselecting everything first
  • deselect (boolean, (optional)) – Deselect, Remove from selection
  • toggle (boolean, (optional)) – Toggle Selection, Toggle the selection
  • deselect_all (boolean, (optional)) – Deselect On Nothing, Deselect all when nothing under the cursor
  • entire_strokes (boolean, (optional)) – Entire Strokes, Select entire strokes instead of just the nearest stroke vertex
  • location (int array of 2 items in [-inf, inf], (optional)) – Location, Mouse location
bpy.ops.gpencil.select_all(action='TOGGLE')

Change selection of all Grease Pencil strokes currently visible

Parameters:action (enum in ['TOGGLE', 'SELECT', 'DESELECT', 'INVERT'], (optional)) –

Action, Selection action to execute

  • TOGGLE Toggle, Toggle selection for all elements.
  • SELECT Select, Select all elements.
  • DESELECT Deselect, Deselect all elements.
  • INVERT Invert, Invert selection of all elements.
bpy.ops.gpencil.select_alternate(unselect_ends=True)

Select alternative points in same strokes as already selected points

Parameters:unselect_ends (boolean, (optional)) – Unselect Ends, Do not select the first and last point of the stroke
bpy.ops.gpencil.select_box(xmin=0, xmax=0, ymin=0, ymax=0, wait_for_input=True, mode='SET')

Select Grease Pencil strokes within a rectangular region

Parameters:
  • xmin (int in [-inf, inf], (optional)) – X Min
  • xmax (int in [-inf, inf], (optional)) – X Max
  • ymin (int in [-inf, inf], (optional)) – Y Min
  • ymax (int in [-inf, inf], (optional)) – Y Max
  • wait_for_input (boolean, (optional)) – Wait for Input
  • mode (enum in ['SET', 'ADD', 'SUB', 'XOR', 'AND'], (optional)) –

    Mode

    • SET Set, Set a new selection.
    • ADD Extend, Extend existing selection.
    • SUB Subtract, Subtract existing selection.
    • XOR Difference, Inverts existing selection.
    • AND Intersect, Intersect existing selection.
bpy.ops.gpencil.select_circle(x=0, y=0, radius=25, wait_for_input=True, mode='SET')

Select Grease Pencil strokes using brush selection

Parameters:
  • x (int in [-inf, inf], (optional)) – X
  • y (int in [-inf, inf], (optional)) – Y
  • radius (int in [1, inf], (optional)) – Radius
  • wait_for_input (boolean, (optional)) – Wait for Input
  • mode (enum in ['SET', 'ADD', 'SUB'], (optional)) –

    Mode

    • SET Set, Set a new selection.
    • ADD Extend, Extend existing selection.
    • SUB Subtract, Subtract existing selection.
bpy.ops.gpencil.select_first(only_selected_strokes=False, extend=False)

Select first point in Grease Pencil strokes

Parameters:
  • only_selected_strokes (boolean, (optional)) – Selected Strokes Only, Only select the first point of strokes that already have points selected
  • extend (boolean, (optional)) – Extend, Extend selection instead of deselecting all other selected points
bpy.ops.gpencil.select_grouped(type='LAYER')

Select all strokes with similar characteristics

Parameters:type (enum in ['LAYER', 'MATERIAL'], (optional)) –

Type

  • LAYER Layer, Shared layers.
  • MATERIAL Material, Shared materials.
bpy.ops.gpencil.select_lasso(mode='SET', path=None)

Select Grease Pencil strokes using lasso selection

Parameters:
  • mode (enum in ['SET', 'ADD', 'SUB', 'XOR', 'AND'], (optional)) –

    Mode

    • SET Set, Set a new selection.
    • ADD Extend, Extend existing selection.
    • SUB Subtract, Subtract existing selection.
    • XOR Difference, Inverts existing selection.
    • AND Intersect, Intersect existing selection.
  • path (bpy_prop_collection of OperatorMousePath, (optional)) – Path
bpy.ops.gpencil.select_last(only_selected_strokes=False, extend=False)

Select last point in Grease Pencil strokes

Parameters:
  • only_selected_strokes (boolean, (optional)) – Selected Strokes Only, Only select the last point of strokes that already have points selected
  • extend (boolean, (optional)) – Extend, Extend selection instead of deselecting all other selected points
bpy.ops.gpencil.select_less()

Shrink sets of selected Grease Pencil points

bpy.ops.gpencil.select_linked()

Select all points in same strokes as already selected points

bpy.ops.gpencil.select_more()

Grow sets of selected Grease Pencil points

bpy.ops.gpencil.selection_opacity_toggle()

Hide/Unhide selected points for Grease Pencil strokes setting alpha factor

bpy.ops.gpencil.selectmode_toggle(mode=0)

Set selection mode for Grease Pencil strokes

Parameters:mode (int in [0, 2], (optional)) – Select mode, Select mode
bpy.ops.gpencil.snap_cursor_to_selected()

Snap cursor to center of selected points

bpy.ops.gpencil.snap_to_cursor(use_offset=True)

Snap selected points/strokes to the cursor

Parameters:use_offset (boolean, (optional)) – With Offset, Offset the entire stroke instead of selected points only
bpy.ops.gpencil.snap_to_grid()

Snap selected points to the nearest grid points

bpy.ops.gpencil.stroke_apply_thickness()

Apply the thickness change of the layer to its strokes

bpy.ops.gpencil.stroke_arrange(direction='UP')

Arrange selected strokes up/down in the drawing order of the active layer

Parameters:direction (enum in ['UP', 'DOWN', 'TOP', 'BOTTOM'], (optional)) – Direction
bpy.ops.gpencil.stroke_caps_set(type='TOGGLE')

Change Stroke caps mode (rounded or flat)

Parameters:type (enum in ['TOGGLE', 'START', 'END', 'TOGGLE'], (optional)) –

Type

  • TOGGLE Both.
  • START Start.
  • END End.
  • TOGGLE Default, Set as default rounded.
bpy.ops.gpencil.stroke_change_color(material="")

Move selected strokes to active material

Parameters:material (string, (optional, never None)) – Material, Name of the material
bpy.ops.gpencil.stroke_cutter(path=None)

Select section and cut

Parameters:path (bpy_prop_collection of OperatorMousePath, (optional)) – Path
bpy.ops.gpencil.stroke_cyclical_set(type='TOGGLE', geometry=False)

Close or open the selected stroke adding an edge from last to first point

Parameters:
  • type (enum in ['CLOSE', 'OPEN', 'TOGGLE'], (optional)) – Type
  • geometry (boolean, (optional)) – Create Geometry, Create new geometry for closing stroke
bpy.ops.gpencil.stroke_flip()

Change direction of the points of the selected strokes

bpy.ops.gpencil.stroke_join(type='JOIN', leave_gaps=False)

Join selected strokes (optionally as new stroke)

Parameters:
  • type (enum in ['JOIN', 'JOINCOPY'], (optional)) – Type
  • leave_gaps (boolean, (optional)) – Leave Gaps, Leave gaps between joined strokes instead of linking them
bpy.ops.gpencil.stroke_lock_color()

Lock any color not used in any selected stroke

bpy.ops.gpencil.stroke_merge(mode='STROKE', back=False, additive=False, cyclic=False, clear_point=False, clear_stroke=False)

Create a new stroke with the selected stroke points

Parameters:
  • mode (enum in ['STROKE', 'POINT'], (optional)) – Mode
  • back (boolean, (optional)) – Draw on Back, Draw new stroke below all previous strokes
  • additive (boolean, (optional)) – Additive Drawing, Add to previous drawing
  • cyclic (boolean, (optional)) – Cyclic, Close new stroke
  • clear_point (boolean, (optional)) – Dissolve Points, Dissolve old selected points
  • clear_stroke (boolean, (optional)) – Delete Strokes, Delete old selected strokes
bpy.ops.gpencil.stroke_merge_by_distance(threshold=0.001, use_unselected=False)

Merge points by distance

Parameters:
  • threshold (float in [0, 100], (optional)) – Threshold
  • use_unselected (boolean, (optional)) – Unselected, Use whole stroke, not only selected points
bpy.ops.gpencil.stroke_sample(length=0.1)

Sample stroke points to predefined segment length

Parameters:length (float in [0, 100], (optional)) – Length
bpy.ops.gpencil.stroke_separate(mode='POINT')

Separate the selected strokes or layer in a new grease pencil object

Parameters:mode (enum in ['POINT', 'STROKE', 'LAYER'], (optional)) –

Mode

  • POINT Selected Points, Separate the selected points.
  • STROKE Selected Strokes, Separate the selected strokes.
  • LAYER Active Layer, Separate the strokes of the current layer.
bpy.ops.gpencil.stroke_simplify(factor=0.0)

Simplify selected stroked reducing number of points

Parameters:factor (float in [0, 100], (optional)) – Factor
bpy.ops.gpencil.stroke_simplify_fixed(step=1)

Simplify selected stroked reducing number of points using fixed algorithm

Parameters:step (int in [1, 100], (optional)) – Steps, Number of simplify steps
bpy.ops.gpencil.stroke_smooth(repeat=1, factor=0.5, only_selected=True, smooth_position=True, smooth_thickness=True, smooth_strength=False, smooth_uv=False)

Smooth selected strokes

Parameters:
  • repeat (int in [1, 50], (optional)) – Repeat
  • factor (float in [0, 2], (optional)) – Factor
  • only_selected (boolean, (optional)) – Selected Points, Smooth only selected points in the stroke
  • smooth_position (boolean, (optional)) – Position
  • smooth_thickness (boolean, (optional)) – Thickness
  • smooth_strength (boolean, (optional)) – Strength
  • smooth_uv (boolean, (optional)) – UV
bpy.ops.gpencil.stroke_split()

Split selected points as new stroke on same frame

bpy.ops.gpencil.stroke_subdivide(number_cuts=1, factor=0.0, repeat=1, only_selected=True, smooth_position=True, smooth_thickness=True, smooth_strength=False, smooth_uv=False)

Subdivide between continuous selected points of the stroke adding a point half way between them

Parameters:
  • number_cuts (int in [1, 10], (optional)) – Number of Cuts
  • factor (float in [0, 2], (optional)) – Smooth
  • repeat (int in [1, 10], (optional)) – Repeat
  • only_selected (boolean, (optional)) – Selected Points, Smooth only selected points in the stroke
  • smooth_position (boolean, (optional)) – Position
  • smooth_thickness (boolean, (optional)) – Thickness
  • smooth_strength (boolean, (optional)) – Strength
  • smooth_uv (boolean, (optional)) – UV
bpy.ops.gpencil.stroke_trim()

Trim selected stroke to first loop or intersection

bpy.ops.gpencil.unlock_all()

Unlock all Grease Pencil layers so that they can be edited

bpy.ops.gpencil.vertex_group_assign()

Assign the selected vertices to the active vertex group

bpy.ops.gpencil.vertex_group_deselect()

Deselect all selected vertices assigned to the active vertex group

bpy.ops.gpencil.vertex_group_invert()

Invert weights to the active vertex group

bpy.ops.gpencil.vertex_group_normalize()

Normalize weights to the active vertex group

bpy.ops.gpencil.vertex_group_normalize_all(lock_active=True)

Normalize all weights of all vertex groups, so that for each vertex, the sum of all weights is 1.0

Parameters:lock_active (boolean, (optional)) – Lock Active, Keep the values of the active group while normalizing others
bpy.ops.gpencil.vertex_group_remove_from()

Remove the selected vertices from active or all vertex group(s)

bpy.ops.gpencil.vertex_group_select()

Select all the vertices assigned to the active vertex group

bpy.ops.gpencil.vertex_group_smooth(factor=0.5, repeat=1)

Smooth weights to the active vertex group

Parameters:
  • factor (float in [0, 1], (optional)) – Factor
  • repeat (int in [1, 10000], (optional)) – Iterations
bpy.ops.gpencil.weightmode_toggle(back=False)

Enter/Exit weight paint mode for Grease Pencil strokes

Parameters:back (boolean, (optional)) – Return to Previous Mode, Return to previous mode