Editing
변형
이동
Reference
- Menu
- 단축키(hotkey)
G
Pressing G moves all the selected strip(s). Move your mouse horizontally (left/right) to change the strip’s position in time. Move vertically (up/down) to change channels.
Holding down Ctrl while dragging snaps to the start and endpoints of other strips. The position of the mouse relative to the selection influences where the strips are snapped. If it is closer to the start of the selection, then the start frame of the selection gets snapped, else the end frame will get snapped.
To “ripple edit” (make room for strips you drag) hold Alt when placing a strip.
You can also lock the direction to time with X or to change the strip’s channel with Y.
It is possible to move strips using mouse by dragging them while holding LMB. Currently it is possible to move only one strip by dragging.
Start Frame Offset
The Start Frame Offset for that strip can be selected by clicking LMB on the left handle of the strip; holding it down (or pressing G and then moving the mouse left/right) changes the start frame within the strip by the number of frames you move it. The frame number label under the strip displays the start frame of the strip.
If you have a 20-image sequence strip, and drag the left handle to the right by 10 frames, the strip will start at image 11 (images 1 to 10 will be skipped). Use this to clip off a roll-up or undesired lead-in.
Dragging the left handle left will create a lead-in (copies) of the first frame for as many frames as you drag it. Use this when you want some frames for a transition at the start of the clip.
End Frame
The End Frame of the strip could be selected by clicking LMB on the right handle of the strip; holding it down (or pressing G) and then moving the mouse changes the ending frame within the strip. The frame number label over the strip displays the end frame of the strip.
Dragging the right handle to the left shortens the clip; any original images at the tail are ignored. Use this to quickly clip off a roll-down.
Dragging the right handle to the right extends the clip. For movies and images sequences, more of the animation is used until exhausted. Extending a clip beyond its length will render as a copy of the last image. Use this for transitions out of this clip.
참고
Multiple selection
You can select several (handles of) strips by Shift-LMB clicking: when you press G, everything that is selected will move with your mouse – this means that, for example, you can at the same time move a strip, shorten two others, and extend a forth one.
Move/Extend from Current Frame
Reference
- Menu
- 단축키(hotkey)
E
With a number of strips selected, pressing E lets you interactively extend the strips. This is similar to moving but is useful for extending (or shortening) time around the current frame.
All selected strip handles to the “mouse side” of the current frame indicator will transform together, so you can change the duration of strips at the current frame.
힌트
Extend is a convenient way to adjust the time of rough edits such as an “animatic” (sequential storyboards). Where it’s possible to select everything and adjust the length of strips around the current frame. This can be especially useful when adding in audio or other elements that could cause the timing to need adjustment.
When performing this operation you may want to enable so markers are updated too.
This simply a convenience operation, instead of manually selecting strips on one side of the current frame, as well as handles on one side of overlapping strips. Then selecting and transforming markers as well. This avoids the manual process, so re-timing can be accessed quickly.
Slip Strip Contents
Reference
- Menu
- 단축키(hotkey)
S
The Slip tool allows you to change the position of the contents of a strip without moving the strip itself.
Snap Strips to the Current Frame
Reference
- Menu
- 단축키(hotkey)
Shift-S
Moves the strip or control point to the current frame.
Clear Strips Offset
Reference
- Menu
- 단축키(hotkey)
Alt-O
To reset the (soft) start/end frame handles.
Swap Strips
Reference
- Menu
- Left Alt-Left
Swaps the active strip with the strip to the left.
- Right Alt-Right
Swaps the active strip with the strip to the right.
Remove Gaps
Reference
- Menu
- 단축키(hotkey)
Backspace
Remove blank frames between the current frame and the first strip to the left, independent of selection or locked state of strips.
- All Gaps
Remove gaps to the right of the strip along with the left.
Insert Gaps
Reference
- Menu
- 단축키(hotkey)
Shift-Equals
Insert blank frames between the current frame and the first strips to the right, independent of selection or locked state of strips.
Image Transform
Scale to Fit
Reference
- Menu
Adjusts the strips Scale Transforms so the visual contents of the strip to fit exactly within the project’s Resolution while maintaining the original aspect ratio.
This may mean that the transparent areas may be added along the content’s border to fit the content in the rendered area.
Scale to Fill
Reference
- Menu
Adjusts the strips Scale Transforms so the visual contents of the strip to span the project’s Resolution while maintaining the original aspect ratio.
This may mean that portions of the original image no longer fit the content inside the rendered area.
Stretch to Fill
Reference
- Menu
Adjusts the strips Scale Transforms so the visual contents of the strip to fill the project’s Resolution. Note, unlike the other two methods described above, Stretch to Fill does not maintaining the original aspect ratio.
This may mean that the original image becomes distorted to fit the content inside the rendered area.
Clear Position
Reference
- Menu
Resets the strips Position Transforms to a value of zero.
Clear Scale
Reference
- Menu
Resets the strips Scale Transforms to a value of one.
Clear Rotation
Reference
- Menu
Resets the strips Rotation Transform to a value of zero.
Clear All
Reference
- Menu
Resets the strips position, scale, and rotation Transforms to their default values.
Split
Reference
- Menu
- 단축키(hotkey)
K
This splits the selected strip in two at the current frame. This will result in two strips which use the same source, fitting the original strip’s timing and length.
힌트
This can be thought of as a quick way to duplicate the current strip, adjusting the start/end frames to form two non-overlapping strips showing the same content as before.
Hold Split
Reference
- Menu
- 단축키(hotkey)
Shift-K
Like Split, it splits a strip in two distinct strips; however you will not be able to drag the endpoints to show the frames past the split of each resulting strip.
Although you can adjust the Hold Offset number fields in the Strip Info panel.
힌트
This can be thought of as a way to simulate splitting the video file in two parts at the cut-point, replacing the current strip with each.
Duplicate Strips
Reference
- Menu
- 단축키(hotkey)
Shift-D
Duplicate a strip to make an unlinked copy; drag it to a time and channel, and drop it by LMB click.
Delete
Reference
- Menu
- 단축키(hotkey)
Delete, X
Delete the selected strip(s).
- Delete Data
After removing the Strip, delete the associated data also.
Separate Images
Reference
- Menu
- 단축키(hotkey)
Y
For images sequence only – Converts the strip into multiple strips, one strip for each frame. Useful for slide shows and other cases where you want to bring in a set on non-continuous images.
- Length
You have to specify the duration you want the resulting strips will be.
Movie Strip
Set Render Size
Reference
- Menu
Sets the render resolution and aspect to match the strip’s resolution.
Deinterlace Movies
Reference
- Menu
Converts interlaced video into progressive video.
Effect Strip
Change Effect Input
Reference
- Menu
Swaps which strips are the input for the effect strip.
Change Effect Type
Reference
- Menu
Switch the effects on a selected Effect strip.
Reassign Inputs
Reference
- Menu
- 단축키(hotkey)
R
This tool can be used to assign (reconnect) effect strips in a different way. Select three arbitrary strips and press R. If you don’t create a cycle, those will be connected to a new effect chain.
Swap Inputs
Reference
- Menu
- 단축키(hotkey)
Alt-S
Swaps the first two inputs for the effect strip.
Lock/Unlock
- Lock Strips Ctrl-H
Disables the strip from being transformed.
- Unlock Strips Ctrl-Alt-H
Enables disabled strips allowing them to be transformed.
Mute/Unmute
- Mute/Unmute Strips H, Alt-H
Mute or unmute the selected strips.
- Mute/Unmute Deselected Strips Shift-H, Shift-Alt-H
Mute or unmute all strips but the selected.
Inputs
- Reload Strips Alt-R
Reloads the strips from their external saved location.
- Reload Strips and Adjust Length Shift-Alt-R
Reloads the strips from their external saved location and re-adjusts the strip duration.
- Change Path/Files
Changes the source file contained in a selected strip.
- Swap Data
Swaps two sequence strips.
Change
Reference
- 단축키(hotkey)
C
- Change Scene
Change the scene assigned to the selected strip.
Fades
Reference
- Menu
This submenu contains tools to add or remove fades to strips. In case of visual strips the tools will animate the opacity or volume in case of audio strips.
- Clear Fades
Removes fade animation from selected sequences.
- Fade In and Out
Fade selected strips in and out.
- Fade In
Fade in selected strips.
- Fade Out
Fade out selected strips.
- From Current Frame
Fade from the current frame to the end of overlapping sequences.
- To Current Frame
Fade from the start of sequences under the Playhead to the current frame.
Overlap Mode
Overlap Mode defines the result of transforming a strip so that it overlaps another strip.
- Shuffle
The overlapping strip will be moved to the nearest free space so that it does not overlap.
- Overwrite
The overlapped strip will be overwritten, trimmed or split by the overlapping strip.
- Expand
All strips on the right side of (each) transformed will be shifted forward to accommodate the overlapping strip.
Snapping
It is possible to enable snapping in the header of the VSE. The snapping behavior can be configured as follows:
- Snap to
- Current Frame
Snaps the transformed selection to the Playhead.
- Hold Offset
Snaps the transformed selection to the Hold Offset.
- Ignore
- Muted Strips
Muted Strips are not considered as snap targets.
- Sound Strips
Sound Strips are not considered as snap targets.
- Current Frame
- Snap to Strips
Snaps the Playhead to all strips.