DXF của AutoCAD (AutoCAD DXF)

Tham Chiếu (Reference)

Hạng Mục (Category): Nhập-Xuất Khẩu (Import-Export)
Trình Đơn (Menu): File ‣ Import/Export ‣ AutoCAD DXF

Nhập (Import)

DXF layers are reflected as Blender groups. This importer uses a general purpose DXF library called "dxfgrabber".

Ánh Xạ Kiểu Dữ Liệu của DXF (DXF Type Mapping)

To be as non-destructive as possible the importer aims to map as many DXF types to Blender curves as possible.

DXF thành Đường Cong (DXF to Curves)

LINE as POLYLINE curve (with the option to merge connecting lines).
(LW)POLYLINE, (LW)POLYGON as POLYLINE curve if they have no bulges else as BEZIER curve.
ARCs, CIRCLEs and ELLIPSEs as BEZIER curves.
HELIXes (3D) as BEZIER curves.

DXF thành Khung Lưới (DXF to Meshes)

MESH is mapped to a mesh object with a Subdivision Surface modifier, including the edge crease.
POLYFACEs and POLYMESHes are imported to a mesh object.
3DFACE s, SOLID s, POINT s are imported into one combined mesh object per layer called layername_3Dfaces.

Những Kiểu DXF còn Thiếu Vắng (Missing DXF Types)

Hatches
Hướng Đạo Viên/Người hướng dẫn/lãnh đạo

Tính Chất (Properties)

Tùy Chọn về Hợp Nhất (Merge Options)

Các Khối Thành (Blocks As)

DXF Blocks can be imported as linked objects or group instances. Linked objects use parenting for DXF sub-blocks (blocks in blocks).

Khối Phụ Huynh sang Khung Hộp Viền (Parent Blocks to Bounding Boxes)

Draw a bounding box around blocks.

Đối Tượng Hợp Nhất (Merged Objects)

Since Blender (v2.71) is pretty slow at adding objects the user might want to merge similar DXF geometry to one object.

Theo Tầng Lớp (By Layer): Produces one object per layer; if there is mesh, curve, lamp, text data on one layer one object per layer and per Blender object.
Theo Tầng Lớp và Thể Loại DXF (By Layer and DXF Type): The second not only differentiates between Blender data types but also DXF types, such as LWPOLYLINE and POLYLINE.
Theo Tầng Lớp và các Đa Giác Đóng Kín Không Phình ra (By Layer and Closed No-bulge Polygons): Closed polylines with no bulge, that is no curved edges, can be merged to one single mesh. This makes sense when the DXF polylines have an extrusion and/or an elevation attribute, which basically describes a location/rotation/scale transformation. If this merge option is chosen, line thickness settings will be ignored/disabled.
Theo Tầng Lớp và Thể Loại DXF và các Khối (By Layer and DXF-Type and Blocks): For DXF files with a block being referenced many times, this option allows to insert the same block many times with one instanced-face object instead of with one object for each time the block needs to be inserted. Unfortunately this works only for block inserts that are uniformly scaled. Non-uniformly scaled block inserts are being imported as defined in Blocks As.

Kết Hợp Thực Thể LINE thành Đa Giác (Combine LINE Entities to Polygons)

Separated lines in DXF might be merged to one consecutive Blender poly curve. Similar to Remove Doubles but for curves.

Độ Dày và Chiều Rộng của Đường Nét (Line Thickness and Width)

Đại Diện cho Độ Dày/Chiều Rộng của Đường Nét (Represent Line Thickness/Width): DXF line attributes thickness and width have an effect on line in Z and X/Y direction respectively. A straight line might be turned to a cube by its attributes for instance. Therefore, in Blender these attributes are represented with curve extrusion, bevel and taper objects.
Hợp Nhất theo Thuộc Tính (Merge by Attributes): If both Merged Objects and Represent Line Thickness/Width are activated the object merging needs to be extended to separate all lines width different thickness and width. With Merge by Attributes this separation option is also available without the actual representation of line thickness and width.

Đối Tượng Bổ Sung (Optional Objects)

Nhập Khẩu TEXT (Import TEXT): (TEXT, MTEXT)
Nhập Khẩu LIGHT (Import LIGHT): Including support for AutoCAD colors.
Xuất Khẩu các Thực Thể ACIS (Export ACIS Entities): Export NURBS 3D geometry (BODY, REGION, PLANESURFACE, SURFACE, 3DSOLID) to ACIS-Sat files, since this is the format AutoCAD stores NURBS to DXF. You are going to be notified about the amount of stored .sat/.sab files.

Tùy Chọn về Góc Nhìn (View Options)

Hiển Thị các Nhóm trong Mục Lục (Display Groups in Outliner[s]): Switch the Outliner display mode to GROUPS (DXF layers are mapped to groups).
Nhập Khẩu Tập Tin DXF vào một Cảnh Mới (Import DXF File to a New Scene): Nội Dung Cần Viết Thêm.
Đặt Hình Học ở Trung Tâm Cảnh (Center Geometry to Scene): Center the imported geometry to the center of the scene; the offset information is stored as a custom property to the scene.

Tham Chiếu Địa Lý (Georeferencing)

Important: DXF files do not store any information about the coordinate system / spherical projection of its coordinates. Best practice is to know the coordinate system for your specific DXF file and enter this information in the DXF importer interface as follows:

Pyproj

Installation: Download (Windows, macOS) Pyproj and copy it to your

AppData/ApplicationSupport Folder/Blender/3.4/scripts/modules/.

In case you need to compile your own binary refer to this post on Blender Artists.

Pyproj is a Python wrapper to the PROJ library, a well-known C library used to convert coordinates between different coordinate systems. Open source GIS libraries such as PROJ are used directly or indirectly by many authorities and therefore can be considered well-maintained.

If Pyproj is available the DXF importer shows a selection of national coordinate systems but lets the user also to enter a custom EPSG / SRID code. It also stores the SRID as a custom property to the Blender scene. If a scene has already such an SRID property the coordinates are being converted from your DXF file to target coordinate system and therefore you must specify an SRID for the DXF file. If no SRID custom property is available the scene SRID is by default the same as the DXF SRID.

Không Có Pyproj (No Pyproj)

In case Pyproj is not available the DXF importer will only use its built-in lat/lon to X/Y converter. For conversion the "transverse Mercator" projection is applied that inputs a lat/lon coordinate to be used as the center of the projection. The lat/lon coordinate is being added to your scene as a custom property. Subsequent imports will convert any lat/lon coordinates to the same georeference.

Important: So far only lat/lon to X/Y conversion is supported. If you have a DXF file with Euclidean coordinates that refer to another lat/lon center the conversion is not (yet) supported.

Quy luật thông thường để lựa chọn một SRID (Rules of thumb for choosing an SRID)

if you have your data from OpenStreetMap or some similar GIS service website and exported it with QGIS or ArcGIS the coordinates are most likely in lat/lon then use WGS84 as your SRID with Pyproj or "spherical" if Pyproj is not available. For other DXF vector maps it's very likely that they use local / national coordinate systems.

Open the DXF with a text editor (it has many thousands of lines) and make an educated guess looking at some coordinates. DXF works with "group codes", a name Autodesk invented for "key" as in key/value pairs. X has group code 10, Y has 20, Z has 30. If you find a pattern like:

10, newline, whitespace, whitespace, NUMBER, newline,
20, newline, whitespace, whitespace, NUMBER, newline,
30, newline, whitespace, whitespace, NUMBER

then NUMBER will be most likely your coordinates. You can probably tell from the format and/or the range of the coordinates which coordinate system it should be.

Xuất Khẩu (Export)

Dữ Liệu Hỗ Trợ (Supported Data)

Mesh face: POLYFACE or 3DFACE
Mesh edge: LINE
Modifier (optionally)

Dữ Liệu chưa Hỗ Trợ (Unsupported Data)

Mesh vertex: POINT
Curve: LINEs or POLYLINE
Curve NURBS: curved-POLYLINE
Text: TEXT or (wip: MTEXT)
Camera: POINT or VIEW or VPORT or (wip: INSERT(ATTRIB+XDATA))
Light: POINT or (wip: INSERT(ATTRIB+XDATA))
Empty: POINT or (wip: INSERT)
Object matrix: extrusion (210-group), rotation, elevation
3D Viewport: (wip: VIEW, VPORT)
Instancing vert: auto-instanced or (wip: INSERT)
Instancing frame: auto-instanced or (wip: INSERT)
Instancing group: auto-instanced or (wip: INSERT)
Material: LAYER, COLOR and STYLE properties
Group: BLOCK and INSERT
Parenting: BLOCK and INSERT
Visibility status: LAYER_on
Frozen status: LAYER_frozen
Locked status: LAYER_locked
Bề Mặt (Surface)
Siêu Đối Tượng
Armature (Bộ Cốt)
Lattice (Lưới Rào)
IPO/Hoạt Họa

Join the 2%