NW

Node Wrangler provides various tools that help you to work with nodes quickly and efficiently.

While many of this add-on's functions work in all supported node editors (Compositor, Shader, Geometry Nodes, and Texture Nodes) some functions only work in specific node editors, and some functions work differently per editor. Functions that only work in specific editors are marked with labels (Compositor, Shader, Geometry Nodes, Texture Nodes). Functions without labels should work for all node editors.

激活

  • Open Blender and go to the Preferences, then the Add-ons tab.

  • Find Node Wrangler and enable the add-on.

用法

Use the panel in Sidebar of the node editor or press Shift-W to bring up the quick access menu. You can also look up the shortcut list in the add-on preferences panel.

../../_images/addons_node_node-wrangler_menu.png

You can access most functions from the sidebar panel or quick access menu.

描述:

懒人连接（Lazy Connect）

参考

快捷键:

Alt-RMB-drag, Shift-Alt-RMB-drag

Connect two nodes without even clicking the sockets. Just drag the cursor from one node to another while holding Alt-RMB. It will select the nodes nearest the start and end points of the drag for connection, so you don’t even have to click on the nodes.

../../_images/addons_node_node-wrangler_lazy-connect.png

Selection can be lazy.

It tries to connect the best-matched sockets possible, based on their names, types, and whether they are open or not.

For a more precise connection, you can alternatively use Shift-Alt-RMB. It brings up menus of available inputs and outputs before connection, so you can select the exact sockets to connect. It's especially useful when working with a large node tree since you can make connections without frequently zooming in and out.

懒人混合（Lazy Mix）

参考

快捷键:

Shift-Ctrl-RMB-drag

Connect the outputs of two nodes into an appropriate "mix" type of node. This is the "lazy" way of selecting nodes and executing the Mix function from Merge with Automatic Type Detection.

合并

参考

菜单:

Node Wrangler ‣ Merge Selected Nodes

Connect outputs of the selected nodes into a "mix" type of node (Mix, Math, Z-Combine, Alpha Over, Mix Shader, Add Shader, Join Geometry).

Note

Merge currently does not support outputs of Integer, String, or Boolean types from Geometry Nodes.

There are automatic and manual ways of merging. The automatic ways let the add-on determine which "mix" node to use based on the types of outputs to merge. The manual ways let you decide and force connections even if the types of outputs and the "mix" node are not compatible.

Note

Generally, the modifier part of the shortcut signifies the type of "mix" node you want to use (Ctrl for automatic detection, Ctrl-Alt for the Mix node, and Shift-Ctrl for the Math node), the non-modifier part signifies the mode of "mix" node you want to set (NumpadPlus for add, NumpadMinus for subtract, NumpadSlash for divide, and NumpadAsterisk for multiply).

与自动类型检测合并

The automatic merge functions determine the type of "mix" node to use based on the types of outputs to merge. If it has a Color output, it will use the Mix node. It will use the Math node if both outputs are of Value type. Add Shader, Mix Shader, and Join Geometry nodes will also be used for specific cases.

模式
Add Ctrl-=, Ctrl-NumpadPlus

Merge into Mix or Math nodes, then set blend mode or math operation as Add. If the outputs are Shaders, it will use Add Shader node instead.

Multiply Ctrl-8, Ctrl-NumpadAsterisk

Merge into Mix or Math nodes, then set blend mode or math operation as Multiply.

Subtract Ctrl-Minus, Ctrl-NumpadMinus

Merge into Mix or Math nodes, then set blend mode or math operation as Subtract.

Divide Ctrl-Slash, Ctrl-NumpadSlash

Merge into Mix or Math nodes, then set blend mode or math operation as Divide.

Mix Ctrl-0, Ctrl-Numpad0

Merge into Mix node, then set blend mode as Mix. If the outputs are Shaders, it will use Mix Shader node instead. If the outputs are Geometry, it will use Join Geometry node.

使用混合节点进行合并

参考

菜单:

Node Wrangler ‣ Merge Selected Nodes ‣ Use Mix Nodes

Use the Mix nodes for merging, regardless of the selected nodes. You can choose the mode of the node via the menu. You can quickly set some operations by using corresponding shortcuts.

  • Add: Ctrl-Alt-=, Ctrl-Alt-=

  • Substract: Ctrl-Alt-Minus, Ctrl-Alt-NumpadMinus

  • Multiply: Ctrl-Alt-8, Ctrl-Alt-NumpadAsterisk

  • Divide: Ctrl-Alt-Slash, Ctrl-Alt-NumpadSlash

使用数学节点进行合并

参考

菜单:

Node Wrangler ‣ Merge Selected Nodes ‣ Use Math Nodes

Use the Math nodes for merging, regardless of the selected nodes. You can choose the mode of the node via the menu. You can quickly set some operations by using corresponding shortcuts.

  • Add: Shift-Ctrl-=, Shift-Ctrl-=

  • Substract: Shift-Ctrl-Minus, Shift-Ctrl-NumpadMinus

  • Multiply: Shift-Ctrl-8, Shift-Ctrl-NumpadAsterisk

  • Divide: Shift-Ctrl-Slash, Shift-Ctrl-NumpadSlash

  • Greater than: Ctrl-Comma

  • Less than: Ctrl-Period

使用Z-Combine节点合并

Compositor

参考

菜单:

Node Wrangler ‣ Merge Selected Nodes ‣ Use Z-Combine Nodes

快捷键:

Ctrl-小键盘句号

Use the Z-Combine nodes for merging. If possible, Image and Z-Depth outputs will be linked. If the current node editor is not Compositor, this will execute the Mix function from the automatic merge.

使用Alpha Over Node合并

Compositor

参考

菜单:

Node Wrangler ‣ Merge Selected Nodes ‣ Use Alpha Over Nodes

快捷键:

Ctrl-Alt-0

Use the Alpha Over nodes for merging. If the current node editor is not Compositor, this will execute the Mix function from the automatic merge.

批量改变混合模式/数学操作

参考

菜单:

Node Wrangler ‣ Batch Change

Change the blend mode or math operation of the selected Mix and Math nodes at once. You can use Alt-Up or Alt-Down to cycle through previous or next blend modes or math operations. You can also quickly set some operations by using corresponding shortcuts.

  • Add: Alt-=, Alt-=

  • Substract: Alt-Minus, Alt-NumpadMinus

  • Multiply: Alt-8, Alt-NumpadAsterisk

  • Divide: Alt-Slash, Alt-NumpadSlash

  • Greater than: Alt-Comma

  • Less than: Alt-Period

变化混合系数

参考

快捷键:

Alt-Left, Shift-Alt-Left, Alt-Right, Shift-Alt-Right, Shift-Ctrl-Alt-Left, Shift-Ctrl-Alt-0, Shift-Ctrl-Alt-Right, Shift-Ctrl-Alt-1

Change the Factor value of the selected Mix and Mix Shader nodes with shortcuts.

  • Increase Factor by 0.1: Alt-Right

  • Decrease Factor by 0.1: Alt-Left

  • Increase Factor by 0.01: Shift-Alt-Right

  • Decrease Factor by 0.01: Shift-Alt-Left

  • Set Factor to 0.0: Shift-Ctrl-Alt-Left, Shift-Ctrl-Alt-0

  • Set Factor to 1.0: Shift-Ctrl-Alt-Right, Shift-Ctrl-Alt-1

删除未使用的节点

参考

菜单:

Node Wrangler ‣ Delete Unused Nodes

快捷键:

Alt-X

Clean up your node tree. Delete all nodes that don't contribute to the final result.

重置背景

Compositor

参考

菜单:

Node Wrangler ‣ Reset Backdrop

快捷键:

Z

Reset the position and scale of the backdrop.

Set Viewer's Tile Center

Compositor

参考

快捷键:

double-click LMB

Set the viewer's tile center to the mouse position.

Add Attribute Node

Shader

参考

菜单:

Header ‣ Add ‣ Input ‣ Attributes

Add an Attribute node with the selected attribute.

Preview Node Output

Shader Geometry Nodes

参考

快捷键:

Shift-Ctrl-LMB for Shader, Shift-Alt-LMB for Geometry Nodes

Connect an output of the selected node to the final output of the node tree (the Material Output or World Output for Shader, the final Group Output for Geometry Nodes) to preview its output in the viewport. You can cycle through the available outputs by clicking it again while holding the modifier keys.

See also

While in Shader, any output can be connected to the final output, in Geometry Nodes, only Geometry outputs can be connected to the final output. To preview other types of outputs in Geometry Nodes, use its own Viewer Node.

See also

Also check out Connect to Output. It is a similar function but has different behaviors. It also works in all node editors.

框显所选

参考

菜单:

Node Wrangler ‣ Frame Selected

快捷键:

Shift-P

Insert the selected nodes into a Frame node.

重载图片（Reload Images）

Compositor Shader Texture Nodes

参考

菜单:

Node Wrangler ‣ Reload Images

快捷键:

Alt-R

Reload all of the images used in the node tree. This lets you reload the images without using the Image Editor.

切换节点类型

参考

菜单:

Node Wrangler ‣ Switch Node Type

快捷键:

Shift-S

Change the type of the selected nodes to any other type. It tries to preserve the connections and values of the original as much as possible.

复制设置

参考

菜单:

Node Wrangler ‣ Copy to Selected ‣ Settings from Active

快捷键:

Shift-C

Copy the settings of the active node to all selected nodes of the same type.

Reset Nodes

参考

快捷键:

Backspace

Revert the settings of the selected nodes to default while maintaining connections.

复制标签（Copy Label）

参考

菜单:

Node Wrangler ‣ Copy to Selected ‣ Copy Label

快捷键:

Shift-V, Shift-C

Copy custom labels to all of the selected nodes. You can copy them from the active node (Shift-V), from the nodes that are linked to the selected ones, or from the names of the sockets that the selected nodes are linked to. Shift-C will bring up a submenu with all available options.

清除标签（Clear Label）

参考

菜单:

Node Wrangler ‣ Clear Label

快捷键:

Alt-L

Clear the custom labels of selected nodes and revert them back to their default node names.

Modify Labels

参考

菜单:

Node Wrangler ‣ Modify Labels

快捷键:

Shift-Alt-L

Batch rename the custom labels of selected nodes. You can add text to the beginning and the end and replace parts of the text.

添加纹理设置

Shader

参考

菜单:

Node Wrangler ‣ Add Texture Setup

快捷键:

Ctrl-T

Add a setup of a texture node, Texture Coordinate, and Mapping nodes to any shader node. If you select a texture node, it will only add the Texture Coordinate and Mapping nodes. For a background shader it will add an Environment Texture node.

Add Principled Texture Setup

Shader

参考

菜单:

Node Wrangler ‣ Add Principled Setup

快捷键:

Shift-Ctrl-T

Add a principled texture setup from the selected texture files. Select a Principled BSDF node, select Add Principled Setup from the quick access menu (or press Shift-Ctrl-T), and select texture files. It automates the process of adding Image Texture nodes, loading images, selecting the appropriate Color Space, and connecting their outputs to the Principled BSDF node.

It detects the type of textures by looking at their file names. You can edit the tags used for this matching process in the add-on preferences.

../../_images/addons_node_node-wrangler_swap_pbr-setup.jpg

Setting up these textures can take dozens of clicks, even with Node Wrangler's other tools. With Principled Texture Setup, you can reduce that to a few clicks.

在输出中添加重路由

参考

菜单:

Node Wrangler ‣ Add Reroutes

快捷键:

斜杠

Add reroute nodes to each output of the selected nodes.

节点对齐（Align Nodes）

参考

菜单:

Node Wrangler ‣ Align Nodes

快捷键:

Shift-=

Align the selected nodes horizontally or vertically. The effect is similar to scaling nodes on an axis (S X 0 or S Y 0), but it places the nodes at an even distance.

框架内选择（父母/子女）

  • ] -- Select all direct child nodes of the selected frame.

  • [ -- Select the direct parent frame node of the selected nodes.

分离输出（Detach Outputs）

参考

菜单:

Node Wrangler ‣ Detach Outputs

快捷键:

Shift-Alt-D

Detach the selected node's outputs while leaving linked inputs intact.

Connect to Output

参考

菜单:

Node Wrangler ‣ Connect to Output

快捷键:

O

Connect the output of the selected node to the final output of the node tree (Composite in Compositor, Material Output or World Output in Shader, the final Group Output in Geometry Nodes, Output in Texture Nodes), or, if the node is inside a group, to the Group Output.

添加图像序列

Compositor Shader

参考

菜单:

Add ‣ Input for Compositor, or Add ‣ Texture for Shader

Add an Image Sequence by only selecting one image from a sequence of image files. It will automatically detect the length of the sequence and set the node appropriately.

添加多个图像

Compositor Shader

参考

菜单:

Add ‣ Input for Compositor, or Add ‣ Texture for Shader

Select multiple images and add a node for each image. (Useful for importing multiple render passes or renders for image stacking.)

See also

请参见 旧维基，以获取存档的原始文档。

参考

类别:

节点

描述::

各种工具来增强和加快基于节点的工作流程。

位置:

Node editor ‣ Sidebar or see the shortcuts of individual tools.

文档:

node_wrangler.py

作者:

Bartek Skorupa, Greg Hall, Sebastian Koenig, Christian Brinkmann, Florian Meyer

许可证:

通用公共图书馆

注意:

此附加组件与Blender捆绑在一起。