Argumentos de la línea de comandos

Blender 3.3 Usage: blender [args …] [file] [args …]

Opciones de procesamiento

-b, --background

Run in background (often used for UI-less rendering).

-a, --render-anim

Render frames from start to end (inclusive).

-S, --scene <nombre>

Define la escena activa <nombre> para que sea procesada.

-f, --render-frame <fotograma>

Procesará el fotograma <fotograma> y lo guardará.

+<fotograma> fotograma de inicio relativo, -<fotograma> fotograma de fin relativo.
También será posible usar una lista de fotogramas separados por comas (sin espacios).
Se podrá definir un rango de fotogramas usando el separador .. entre el primer y último fotograma (que estará incluido).

-s, --frame-start <fotograma>

Set start to frame <frame>, supports +/- for relative frames too.

-e, --frame-end <fotograma>

Set end to frame <frame>, supports +/- for relative frames too.

-j, --frame-jump <fotogramas>

Set number of frames to step forward after each rendered frame.

-o, --render-output <ruta>

Set the render path and file name. Use // at the start of the path to render relative to the blend-file.

The # characters are replaced by the frame number, and used to define zero padding.

prueba_##_animación.png se transformará en prueba_01_animación.png
prueba-######.png se transformará en prueba-000001.png

When the filename does not contain #, The suffix #### is added to the filename.

The frame number will be added at the end of the filename, eg:

blender -b animation.blend -o //render_ -F PNG -x 1 -a

//anim_ se transformará en //anim_####, guardando fotogramas como //anim_0001.png

-E, --engine <motor>

Specify the render engine. Use -E help to list available engines.

-t, --threads <hilos>

Use amount of <threads> for rendering and other operations [1-64], 0 for systems processor count.

Opciones de formato

-F, --render-format <formato>

Set the render format. Valid options are: TGA RAWTGA JPEG IRIS IRIZ AVIRAW AVIJPEG PNG BMP

Formats that can be compiled into Blender, not available on all systems: HDR TIFF OPEN_EXR OPEN_EXR_MULTILAYER MPEG CINEON DPX DDS JP2 WEBP

-x, --use-extension <booleana>

Set option to add the file extension to the end of the file.

Opciones de reproducción de animación

-a <opciones> <archivo(s)>

Instead of showing Blender’s user interface, this runs Blender as an animation player, to view movies and image sequences rendered in Blender (ignored if -b is set).

Argumentos de reproducción:

-p <sx> <sy>: Open with lower left corner at <sx>, <sy>.
-m: Read from disk (Do not buffer).
-f <fps> <fps-base>: Specify FPS to start with.
-j <fotograma>: Set frame step to <frame>.
-s <fotograma>: Play from <frame>.
-e <fotograma>: Play until <frame>.
-c <memoria_caché>: Amount of memory in megabytes to allow for caching images during playback. Zero disables (clamping to a fixed number of frames instead).

Opciones de ventana

-w, --window-border: Force opening with borders.
-W, --window-fullscreen: Force opening in fullscreen mode.
-p, --window-geometry <sx> <sy> <ancho> <altura>: Open with lower left corner at <sx>, <sy> and width and height as <w>, <h>.
-M, --window-maximized: Force opening maximized.
-con, --start-console: Start with the console window open (ignored if -b is set), (Windows only).
--no-native-pixels: Do not use native pixel size, for high resolution displays (MacBook Retina).
--no-window-focus: Open behind other windows and without taking focus.

Opciones de Python

-y, --enable-autoexec: Enable automatic Python script execution (default).
-Y, --disable-autoexec: Disable automatic Python script execution (pydrivers & startup scripts).
-P, --python <ruta_a_archivo>: Run the given Python script file.
--python-text <nombre>: Run the given Python script text block.
--python-expr <expresión>: Run the given expression as a Python script.
--python-console: Ejecutar Blender con una consola interactiva.
--python-exit-code <código>: Set the exit-code in [0..255] to exit if a Python exception is raised (only for scripts executed from the command line), zero disables.
--python-use-system-env: Allow Python to use system environment variables such as PYTHONPATH and the user site-packages directory.
--addons <complemento(s)>: Comma separated list (no spaces) of add-ons to enable in addition to any default add-ons.

Opciones de registro

--log <coincidencia>: Enable logging categories, taking a single comma separated argument. Multiple categories can be matched using a .* suffix, so --log "wm.*" logs every kind of window-manager message. Sub-string can be matched using a * prefix and suffix, so --log "*undo*" logs every kind of undo-related message. Use «^» prefix to ignore, so --log "*,^wm.operator.*" logs all except for wm.operators.* Use «*» to log everything.
--log-level <nivel>: Set the logging verbosity level (higher for more details) defaults to 1, use -1 to log all levels.
--log-show-basename: Only show file name in output (not the leading path).
--log-show-backtrace: Show a back trace for each log message (debug builds only).
--log-show-timestamp: Show a timestamp for each log message in seconds since start.
--log-file <ruta_a_archivo>: Set a file to output the log to.

Opciones de depuración

-d, --debug

Turn debugging on.

Enables memory error detection
Disables mouse grab (to interact with a debugger in some cases)
Keeps Python’s sys.stdin rather than setting it to None

--debug-value <valor>

Set debug value of <value> on startup.

--debug-events

Enable debug messages for the event system.

--debug-ffmpeg

Enable debug messages from FFmpeg library.

--debug-handlers

Enable debug messages for event handling.

--debug-libmv

Enable debug messages from libmv library.

--debug-cycles

Enable debug messages from Cycles.

--debug-memory

Enable fully guarded memory allocation and debugging.

--debug-jobs

Enable time profiling for background jobs.

--debug-python

Enable debug messages for Python.

--debug-depsgraph

Enable all debug messages from dependency graph.

--debug-depsgraph-eval

Enable debug messages from dependency graph related on evaluation.

--debug-depsgraph-build

Enable debug messages from dependency graph related on graph construction.

--debug-depsgraph-tag

Enable debug messages from dependency graph related on tagging.

--debug-depsgraph-no-threads

Switch dependency graph to a single threaded evaluation.

--debug-depsgraph-time

Enable debug messages from dependency graph related on timing.

--debug-depsgraph-pretty

Enable colors for dependency graph debug messages.

--debug-depsgraph-uuid

Verify validness of session-wide identifiers assigned to ID datablocks.

--debug-ghost

Enable debug messages for Ghost (Linux only).

--debug-wintab

Enable debug messages for Wintab.

--debug-gpu

Enable GPU debug context and information for OpenGL 4.3+.

--debug-gpu-force-workarounds

Enable workarounds for typical GPU issues and disable all GPU extensions.

--debug-wm

Enable debug messages for the window manager, shows all operators in search, shows keymap errors.

--debug-xr

Enable debug messages for virtual reality contexts. Enables the OpenXR API validation layer, (OpenXR) debug messages and general information prints.

--debug-xr-time

Enable debug messages for virtual reality frame rendering times.

--debug-all

Enable all debug messages.

--debug-io

Enable debug messages for I/O (Collada, …).

--debug-fpe

Enable floating-point exceptions.

--debug-exit-on-error

Immediately exit when internal errors are detected.

--disable-crash-handler

Disable the crash handler.

--disable-abort-handler

Disable the abort handler.

--verbose <nivel>

Set the logging verbosity level for debug messages that support it.

Opciones varias

--open-last: Open the most recently opened blend file, instead of the default startup file.
--app-template <plantilla>: Set the application template (matching the directory name), use default for none.
--factory-startup: Skip reading the startup.blend in the users home directory.
--enable-event-simulate: Enable event simulation testing feature bpy.types.Window.event_simulate.
--env-system-datafiles: Set the BLENDER_SYSTEM_DATAFILES environment variable.
--env-system-scripts: Set the BLENDER_SYSTEM_SCRIPTS environment variable.
--env-system-python: Set the BLENDER_SYSTEM_PYTHON environment variable.
-noaudio: Force sound system to None.
-setaudio: Force sound system to a specific device. None SDL OpenAL CoreAudio JACK PulseAudio WASAPI.
-h, --help: Print this help text and exit.
/?: Print this help text and exit (Windows only).
-R: Register blend-file extension, then exit (Windows only).
-r: Silently register blend-file extension, then exit (Windows only).
-v, --version: Print Blender version and exit.
--: End option processing, following arguments passed unchanged. Access via Python’s sys.argv.

Other Options

--debug-freestyle: Enable debug messages for Freestyle.

Procesamiento de los argumentos

Los argumentos deberá estar separados por espacios en blanco, p.ej:

blender -ba test.blend

…will exit since -ba is an unknown argument.

Orden de los argumentos

Arguments are executed in the order they are given. eg:

blender --background test.blend --render-frame 1 --render-output '/tmp'

…will not render to /tmp because --render-frame 1 renders before the output path is set.

blender --background --render-output /tmp test.blend --render-frame 1

…will not render to /tmp because loading the blend-file overwrites the render output that was set.

blender --background test.blend --render-output /tmp --render-frame 1

…works as expected.

Variables de entorno

BLENDER_USER_CONFIG: Directory for user configuration files.
BLENDER_USER_SCRIPTS: Directory for user scripts.
BLENDER_SYSTEM_SCRIPTS: Directory for system wide scripts.
BLENDER_USER_DATAFILES: Directory for user data files (icons, translations, ..).
BLENDER_SYSTEM_DATAFILES: Directory for system wide data files.
BLENDER_SYSTEM_PYTHON: Directory for system Python libraries.
OCIO: Path to override the OpenColorIO config file.
TEMP: Store temporary files here.
TMP: or $TMPDIR Store temporary files here.

Join the 2%