Properties – Властивості¶

Shape – Форма¶

Reference – Довідка

Mode – Режим: All Modes – Усі Режими
Panel – Панель: «Властивості > Текст > Форма» – Properties ‣ Text ‣ Shape

Більшість устав у панелі Shape спільно використовуються з блоками даних кривих – Curves, будь ласка, щодо деталей зверніться до довідки про них.

Швидке Редагування – Fast Editing: Не заповнюються літери у Режимі Редагування – Edit Mode, лише показується їх контур.

Texture Space – Простір Текстури¶

Кожен Об’єкт може мати автоматично генеровану розкладку UV, ці розкладки можуть налагоджуватися тут.

Дивіться детальніше Generated UV Properties.

Geometry – Геометрія¶

Reference – Довідка

Mode – Режим: All Modes – Усі Режими
Panel – Панель: «Властивості > Шрифт > Геометрія» – Properties ‣ Font ‣ Geometry

Offset – Зсув: Offset the control points of the curves defining the letters, which will make them thinner or thicker. Use with care, it can quickly lead to artifacts…

Видавлення, Звуження та Скіс – Extrusion, Taper & Bevel¶

Решта устав цієї панелі, що використовуються для надання об’єму літерам, також спільно використовуються з блоками даних кривих – Curves, будь ласка, щодо деталей зверніться до довідки про них.

Примітка

How the Taper object effect works depends on how the curves defining the letters are built. The results can often look quite random…

Примітка

Bevel is applied to the curves defining the letters, which means that usually it will follow their outlines (there will be two parallel beveled curves, and not a single one, as one might expect).

Шрифт – Font¶

Reference – Довідка

Mode – Режим: All Modes – Усі Режими
Panel – Панель: Properties ‣ Font ‣ Font

Blender comes with a built-in font by default that is displayed in each of the four font style data-block menus. The built-in font is always present and shows in this list as «Bfont». The data-block menu contains a list displaying the currently loaded fonts. Select one for each font style.

To load a different Font, click one of the Load buttons in the Font panel and navigate to a font file. The File Browser will give all valid fonts a capital «F» icon.

If you select a font that is unsupported by Blender, you will get the error Not a valid font.

Примітка

Location of Fonts on Unix

Fonts are typically located under /usr/lib/fonts, or some variant like /usr/lib/X11/fonts, but not always. They may be in other locations as well, such as /usr/share/local or /usr/local/share, and possibly related sub-trees.

Remember that the same font will be applied to all chars with same style in a text, but that a separate font is required for each style. For example, you will need to load an Italics font in order to make characters or words italic. Once the font is loaded you can apply that font «Style» to the selected characters or the whole object. In all, you would need to load a minimum of four different types of fonts to represent each style (Normal, Italics, Bold, Bold & Italics).

It is important to understand, that Blender does not care what font you load for «normal», «bold», etc., styles. This is how you can have up to four different fonts in use in the same text, but you have to choose between different styles of a same font, or different fonts. Blender has a number of typographic controls for changing the style and layout of text, found in the Font panel.

Жирно – Bold

Toggled with the Bold button before typing. Text can also be set to bold by selecting it then using the Bold entry in the Text menu of the 3D Viewport.

Курсив – Italics

Toggled with the Italic button before typing. Text can also be set to italic by selecting it then using the Italic entry in the Text menu of the 3D Viewport.

Підкреслення – Underline

Вмикає підкреслювання, як це керується уставами підкреслення – underline settings нижче.

Зменшені Заголовні – Small Caps

Вмикайте цю опцію для уводу символів як зменшених заголовних.

Розмір Small Caps може бути змінено за допомогою Small Caps Scale setting.

Transform – Трансформа¶

Size – Розмір

Controls the size of the whole text (no way to control each char size independently). Note however, that chars with different fonts (different styles, see below) might have different visible sizes.

Shear – Косування

Controls the inclination of the whole text. As similar as it may seem, this is not the same thing as italics style.

../../_images/modeling_texts_properties_shear-example.png

Приклад косування.¶

Шрифт з Об’єктів – Object Font

Allows individual objects to be used to render fonts, you can create/model your own complex font inside Blender! This field is used to select the objects prefix name (object «family») to be used to locate the individual characters used for typing. This is quite a complex process, so here are detailed steps to follow:

Create the font characters, each character can be any object type (mesh, curve, etc.). They must all have a name following the naming schema: «common prefix» followed by the «character name» (e.g. «ft.a», «ft.b», etc.).
Для об’єкта тексту увімкніть примірникування вершин – Instancing Vertices.
In the Font tab, fill the Object Font field with the «common prefix» of your «font» objects. Now, each time a character in your text matches the suffix part of a «font» object’s name, this object is duplicated on this character.

Примітка

Ці об’єкти дублюються так, що їх центр розташовується у нижньому правому кутку відповідних символів.

Текст на Кривій – Text on Curve

Вибирається об’єкт кривої, за якою об’єкт тексту буде слідувати.

../../_images/modeling_texts_properties_curved-lowres-example.png

Текст на кривій.¶

Порада

Ви повинні швидше використовувати модифікатор «Крива» – Curve modifier, який пропонує більше керування, і є стандартним способом для досягнення таких ефектів у сучасному Blender’і.

Підкреслення – Underline: Toggled with the Underline button before typing. Text can also be set to Underlined by selecting it then using the Underline entry in the Text menu of the 3D Viewport.
Позиція Підкреслення – Underline Position: Це дозволяє вам зсувати вертикально позицію підкреслення.
Товщина Підкреслення – Underline Thickness: Це керує товщиною підкреслення.
Масштаб Зменшених Заголовних – Small Caps Scale: Це масштабування застосовується до заголовних літер для перетворення їх на зменшені заголовні.

Paragraph¶

Reference – Довідка

Mode – Режим: All – Усе
Panel – Панель: Properties ‣ Font ‣ Paragraph

The Paragraph Panel has settings for the alignment and spacing of text.

../../_images/modeling_texts_properties_paragraph-settings.png

The Paragraph panel.¶

Вирівняння – Alignment¶

Horizontal Alignment

Left – Вліво: Aligns text to the left of the frames when using them, else uses the origin of the text object as the starting point of the text (which grows to the right).
Center – Центр: Centers text in the frames when using them, else uses the origin of the text object as the mid-point of the text (which grows equally to the left and right).
Right – Управо: Aligns text to the right of the frames when using them, else uses the origin of the text object as the ending point of the text (which grows to the left).
Justify: Only flushes a line when it is terminated by a word-wrap (not by a newline), and uses white-space instead of character spacing (kerning) to fill lines.
Flush: Always flushes the line, even when it is still being typed-in. It uses character spacing (kerning) to fill lines.

Примітка

Both Justify and Flush only work within frames.

Vertical Alignment

Top Base-Line

With text boxes, aligns the „top“ base-line of the text to the top of the frames.
With no text box, aligns the actual base-line of the text to the origin of the object, and grows to the bottom.

Примітка

That difference of reference point in the first line depending on usage of boxes or not is indeed confusing.

Top – Зверху

With text boxes, aligns the top of the text to the top of the frames.
With no text box, aligns the top of the text to the origin of the object, and grows to the bottom.

Center – Центр

With text boxes, centers the text in the frames.
With no text box, centers the text on the origin of the object, and grows in both top and bottom directions equally.

Bottom – Знизу

With text boxes, align the bottom of the text to the bottom of the frames.
With no text box, align the bottom of the text to the origin of the object, and grows to the top.

Bottom Base-Line

With text boxes, aligns the base-line of the text to the bottom of the frames.
With no text box, aligns the base-line of the text to the origin of the object, and grows to the top.

Інтервал – Spacing¶

Character Spacing

A factor by which space between each character (kerning) is scaled in width.

In Edit Mode in the 3D Viewport, you can also control individual kerning at text cursor position by pressing Alt-Left / Alt-Right to decrease/increase it.

Word Spacing

A factor by which white-space between words is scaled in width.

Line Spacing

A factor by which the vertical space between lines is scaled.

Зсув X, Y – Offset X, Y

These settings control the X and Y offset of the text position within the object. This applies relatively to the object’s origin, either to the whole text or, when using text boxes, to each frame.

Text Boxes¶

Reference – Довідка

Mode – Режим: All – Усе
Panel – Панель: Properties ‣ Font ‣ Text Boxes

Text boxes (or frames) allow you to distribute the text among rectangular areas within a single text object. An arbitrary number of freely positionable and re-sizable text frames are allowed per text object.

The text flows continuously from the lowest-numbered frame to the highest-numbered frame with text inside each frame word-wrapped. It flows between frames when a lower-numbered frame cannot fit any more text. If the last frame is reached, text overflows out of it (by default, see options below).

../../_images/modeling_texts_properties_frame-upperpanel-area.png

Text Boxes panel.¶

Add Textbox

Inserts a new frame, just after the current one (in text flow order). The new frame will have the same size and position as the selected one.

Видалення – Delete X

Delete the current frame.

Overflow

How to handle text overflowing available space in the defined boxes.

Overflow: Just keep text running out of the last box.
Scale to Fit: Scale text to fit into the available space.
Truncate – Урізання: Hide the end of the text that does not fit into the available space.

Примітка

It will only truncate in Object Mode, in Edit Mode the whole text remains visible (and overflows as needed).

Size X, Y

Specifies the width and height of the text box, if set to zero no word-wrap happens (it is ignored, and the whole text box system is disabled if all are set to a null size).

Зсув X, Y – Offset X, Y

Controls the X and Y offset of the frame, i.e. its position.

../../_images/modeling_texts_properties_frame-example4.png

Multiple columns, text flowing between boxes.¶