Viewport Overlays
Using the Viewport Overlays pop-over settings for the overlays can be configured. There is a toggle to hide all overlays for the 3D Viewport.
As opções que são visíveis no pop-over dependem do modo em que o 3D Viewport está.
Object Mode
As próximas opções estão sempre presentes, independente do modo atual.
Guides
- Grade
Show grid in orthographic side view.
- Floor
Show the ground plane.
- Eixos
Show the X, Y and/or Z axis line.
- Scale
A distância entre linhas na grade/chão.
- Subdivisão
O número de subdivisões entre linhas da grade.
- Informações de texto
Shows information such as the View Perspective, playback FPS, current frame number, and the name of the active Collection and Object.
- Statistics
Show information about the amount of objects and geometry. Note the counters that are displayed depends on the current selection. For example selecting a mesh gives info on the number of vertices, edges, and faces, while selecting other object such as lights shows a count of the lights in the scene.
Objects – Number of the selected objects and the total count.
Geometry – Displays information about the current scene depending on the mode and object type. This can be the number of vertices, faces, triangles, or bones.
- HDRI Preview
Show two spheres, one glossy and one diffuse, to preview HDRIs used in Material Preview and Rendered shading modes.
- Cursor 3D
Mostrar a sobreposição do Cursor 3D.
- Annotations
Mostrar a sobreposição da anotação.
Objetos
- Extra
Mostrar detalhes dos objetos incluindo fios (wires) vazios, câmeras e outros guias visuais.
- Relationship Lines
Mostrar linhas tracejadas indicando os pais (parents) ou relacionamentos de constraint.
- Outline Selected
Mostrar um linha acesa em torno dos objetos selecionados.
- Ossos
Mostre os Bones. Desabilitar para mostrar apenas o seu caminho de movimento.
- Caminhos de movimento
Mostrar a sobreposição do caminho do movimento.
- Origem
Mostrar a origem do objeto ativo.
- Origin (All)
Mostrar a origem do objeto de todos os objetos.
Geometria
- Wireframe
Displays the mesh’s face edges, similar to Wireframe Shading but displays edges on top of existing shading. The value slider adjusts which edges to display by only showing wires on prominent edges. Lower values hide edges with angles close to 180 degrees while a value of 1 shows all wires.
- Opacidade
The transparency of the displayed edges; a value of 1 is fully opaque, a value of 0 is fully transparent.
- Fade Inactive Geometry
Fade inactive geometry using the viewport background color. The value slider controls the factor of the objects are blended with the background.
- Face Orientation
Show the face orientation overlay. In the face orientation overlay all faces where the face normal points towards the camera are colored blue. All faces where the face normal points away from the camera are colored red. With this overlay, it is easy to detect the orientation of the face normals.
Rastreamento de movimentos
Show the motion tracking overlay.
- Camera Path
Show the reconstruction camera path.
- Marker Names
Show the names for reconstructed track objects.
- Trilhas
Change the display of the reconstructed tracks.
Eixos planos
Setas
Seta única
Círculo
Cubo
Esfera
Cone
- Tamanho
Change the display size of the reconstructed tracks.
Mesh Edit Mode
The next options are available when in Edit Mesh Mode.
- Arestas
Highlighted selected and partially selected edges.
Only affects vertex and face select mode (as edges are always highlighted in edge select mode).
- Faces
Highlight faces using a face overlay that applies to both selected and unselected faces.
Affects all selection modes.
- Center
Show face center points in solid shading modes.
Only affects face select mode.
- Creases
Display edges marked with a crease for the Subdivision Surface Modifier.
- Acentuado
Display sharp edges, used with the Edge Split modifier.
- Bevel
Display weights created for the Bevel Modifier.
- Costuras
Display the UV unwrapping seams.
- Edge Marks and Face Marks
Used by Freestyle.
Shading
- Hidden Wire
Show only front-facing wireframes. This is useful for a retopology workflow.
Dica
Optimally this could be combined with the X-Ray display setting.
- Vertex Groups Weights
Display weights in Edit Mode.
- Zero Weights
To display unreferenced and zero weighted areas in black. This helps to identify areas with very low weights that have been painted onto.
- None
Vertices are displayed in the usual way.
- Ativo(a)
Show in black vertices with no weights in the active group.
- Todos
The vertex is shown in black if it has zero weight in all groups.
Análise de malha
Show the mesh analysis overlay.
See: Análise de malha.
Measurement
Numerical measures of the selected elements on screen as part of the text info overlay. The Unidades can be set in the Scene properties.
- Edge Length
Show the length of selected edges.
- Ângulos das arestas
Show the angle of selected edges between two faces.
- Face Area
Show the area of selected faces.
- Face Angle
Show the angle of selected face corners.
Dica
Geometry connected to the selection is shown while transforming, allowing you to move a vertex and see the connected edge lengths for example.
Nota
These values respect Global/Local.
Use Global if you want the Object’s scale to be applied to the measurements.
Normais
Display vertex normals
Display face normals at vertices (split normals)
Display face normals
- Tamanho
The size to show the selected normals.
- Constant Screen Size Normals
Keep the size of normals constant in relation to the zoom level.
Developer
- Indices
Display the indices of selected vertices, edges and faces.
Freestyle
- Marcações de arestas
Display Freestyle edge marks, used with the Freestyle renderer.
- Marcações de faces
Display Freestyle face marks, used with the Freestyle renderer.
Modo de escultura
Pintura de vértices
- Stencil Mask Opacity
Opacity of the stencil mask overlay in Vertex Paint Mode.
- Show Wire
Use wireframe display in paint modes.
Weight Paint
- Opacidade
The opacity of the overlay.
- Zero Weights
To display unreferenced and zero weighted areas in black. This helps to identify areas with very low weights that have been painted onto.
- None
Vertices are displayed in the usual way.
- Ativo(a)
Show in black vertices with no weights in the active group.
- Todos
The vertex is shown in black if it has zero weight in all groups.
- Show Weight Contours
Show contour lines formed by points with the same interpolated weight.
This visualizes weight variations too small to be seen from colors and can be useful for judging the smoothness and consistency of gradients, e.g. when using smoothing tools and brushes.
- Show Wire
Use wireframe display in paint modes.
Texture Paint
- Stencil Mask Opacity
The opacity of the stencil mask overlay in Texture Paint Mode.
Ossos
- Fade Geometry
Show the bones on top and face other geometry to the back. The opacity can be controlled with the slider.
- Bone Wireframe Opacity
Specifies the maximum opacity used for bones drawn in the wireframe style in Edit, Pose, or Weight Paint modes. This is helpful when it is necessary to reduce clutter and focus on the mesh rather than bones.
Lápis de cera
- Onion Skin
Show ghosts of the keyframes before and after the current frame. If Multiframe is enabled Keyframes before and after of the active frame are displayed using onion colors.
- Lonas
Display a grid over Grease Pencil drawing plane. The opacity of the grid can be controlled with the slider. When using the Canvas X-Ray option objects are drawn behind the canvas grid.
- Fade Layers
Decrease the opacity of all the layers in the object other than the active one. The opacity factor can be controlled with the slider.
- Fade Objects
Cover all viewport except the active Grease Pencil object with a full color layer to improve visibility while drawing over complex scenes.
- Fade Grease Pencil Objects
Include or exclude Grease Pencil objects.
- Edit Lines
Show edit lines when editing strokes.
- Only in Multiframe
Show edit lines only when using multiframe edition.
- Stroke Direction
Toggles the display of the strokes start point (green) and end point (red) to visualize the line direction.
- Material Name
Show material name next to the linked stroke.
- Vertex Opacity
Opacity for edit vertices (points).
- Vertex Paint Opacity
The opacity of the overlay.
- Hastes
When Curve Editing is active, this option controls how curves are displayed in the 3D Viewport.
- None
No handles are displayed only the control points.
- Selected
Only handles for selected control points are displayed.
- Todos
All the handles are displayed.