Công Cụ UV
Tham Chiếu
- Trình Biên Soạn
Cổng Nhìn 3D
- Chế Độ
Chế Độ Biên Soạn
- Trình Đơn
- Tổ Hợp Phím Tắt
NumpadSlash
Blender offers several ways of mapping UVs. The simpler projection methods use formulas that map 3D space onto 2D space, by interpolating the position of points toward a point/axis/plane through a surface. The more advanced methods can be used with more complex models, and have more specific uses.
Mở Gói
Tham Chiếu
- Trình Biên Soạn
Thành Tố Điều Khiển Tiêu Đề trong Cổng Nhìn 3D
- Chế Độ
Chế Độ Biên Soạn
- Trình Đơn
- Tổ Hợp Phím Tắt
NumpadSlash
Flattens the mesh surface by cutting along seams. Useful for organic shapes.
Ghi chú
The Unwrap operator is the only UV unwrapping operator that takes into account seams.
Begin by selecting all faces you want to unwrap. In the 3D Viewport, select or U and select Unwrap. You can also do this from the UV Editor with or U. This method will unwrap all faces and reset previous work. The UVs menu will appear in the UV Editor after unwrapping has been performed once.
Result of unwrapping Suzanne.
This tool unwraps the faces of the object to provide the "best fit" scenario based on how the faces are connected and will fit within the image, and takes into account any seams within the selected faces. If possible, each selected face gets its own different area of the image and is not overlapping any other faces UVs. If all faces of an object are selected, then each face is mapped to a part of the image.
Tùy Chọn
Blender has two ways of calculating the unwrapping. They can be selected in the tool setting in the tool panel in the 3D Viewport.
- Cơ Sở Góc
This method gives a good 2D representation of a mesh.
- Bảo Giác
Uses LSCM (Least Squares Conformal Mapping). This usually gives a less accurate UV mapping than Angle Based, but works better for simpler objects.
- Lấp Lỗ
Activating Fill Holes will prevent overlapping from occurring and better represent any holes in the UV regions.
- Giữ Đúng Tỷ Lệ Tương Quan
Map UVs taking image aspect into account.
- Dùng Bộ Điều Chỉnh Phân Hóa Mặt
Map UVs taking vertex position after Subdivision Surface Modifier into account.
- Lề
Space between UV islands.
Mẹo
A face's UV image texture only has to use part of the image, not the whole image. Also, portions of the same image can be shared by multiple faces. A face can be mapped to less and less of the total image.
Phóng Chiếu UV Thông Minh
Tham Chiếu
- Trình Biên Soạn
Cổng Nhìn 3D
- Chế Độ
Chế Độ Biên Soạn
- Trình Đơn
- Tổ Hợp Phím Tắt
NumpadSlash
Smart UV Project, cuts the mesh based on an angle threshold (angular changes in your mesh). This gives you fine control over how automatic seams are be created. It is good method for simple and complex geometric forms, such as mechanical objects or architecture.
This algorithm examines the shape of your object, the faces selected and their relation to one another, and creates a UV map based on this information and settings that you supply.
In the example below, the Smart Mapper mapped all of the faces of a cube to a neat arrangement of three sides on top, three sides on the bottom, for all six sides of the cube to fit squarely, just like the faces of the cube.
Smart UV project on a cube.
For more complex mechanical objects, this tool can quickly and easily create a regular and straightforward UV layout for you.
Tùy Chọn
The Điều Chỉnh Thao Tác Trước Đây panel allows fine control over how the mesh is unwrapped:
- Giới hạn góc
This controls how faces are grouped: a higher limit will lead to many small groups but less distortion, while a lower limit will create fewer groups at the expense of more distortion.
- Lề của Hải Đảo
This controls how closely the UV islands are packed together. A higher number will add more space between islands.
- Trọng Lượng Diện Tích
Véctơ của quá trình phóng chiếu trọng lượng theo bề mặt với diện tích lớn hơn.
Đóng Gói Ánh Xạ Ánh Sáng
Tham Chiếu
- Trình Biên Soạn
Cổng Nhìn 3D
- Chế Độ
Chế Độ Biên Soạn
- Trình Đơn
- Tổ Hợp Phím Tắt
NumpadSlash
Lightmap Pack takes each of a mesh's faces, or selected faces, and packs them into the UV bounds. Lightmaps are used primarily in realtime rendering, where lighting information is baked onto texture maps, when it is needed to use as much UV space as possible. It can also work on several meshes at once. It has several options that appear in the Toolbar:
You can set the tool to map just Selected Faces or All Faces if working with a single mesh.
The Selected Mesh Object option works on multiple meshes. To use this, in Object Mode select several mesh objects, then go into Edit Mode and activate the tool.
Tùy Chọn
- Đồng Phân Hưởng Không Gian Chất Liệu
This is useful if mapping more than one mesh. It attempts to fit all of the objects' faces in the UV bounds without overlapping.
- Bản Đồ UV Mới
If mapping multiple meshes, this option creates a new UV map for each mesh. See Ánh Xạ UV.
- Hình Ảnh Mới
Assigns new images for every mesh, but only one if Shared Tex Space is enabled.
- Khổ Ảnh
Set the size of the new image.
- Chất Lượng Đóng Gói
Pre-packing before the more complex Box packing.
- Lề
This controls how closely the UV islands are packed together. A higher number will add more space between islands.
Đi Theo Tứ Giác Đang Hoạt Động
Tham Chiếu
- Trình Biên Soạn
Cổng Nhìn 3D
- Chế Độ
Chế Độ Biên Soạn
- Trình Đơn
- Tổ Hợp Phím Tắt
NumpadSlash
The Follow Active Quads tool takes the selected faces and lays them out by following continuous face loops, even if the mesh face is irregularly-shaped. Note that it does not respect the image size, so you may have to scale them all down a bit to fit the image area.
Tùy Chọn
- Chế Độ Chiều Dài Cạnh
- Đều Đặn
Phân Khoảng Toàn bộ các UV Đều Đặn.
- Chiều Dài
Nội Dung Cần Viết Thêm.
- Trung Bình Chiều Dài
Phân khoảng trung bình trên chiều dài cạnh UV của mỗi vòng mạch.
Ghi chú
Please note that it is the shape of the active quad in UV space that is being followed, not its shape in 3D space. To get a clean 90-degree unwrap make sure the active quad is a rectangle in UV space before using "Follow active quad".
Phóng Chiếu Hình Lập Phương
Tham Chiếu
- Trình Biên Soạn
Cổng Nhìn 3D
- Chế Độ
Chế Độ Biên Soạn
- Trình Đơn
- Tổ Hợp Phím Tắt
NumpadSlash
Cube Projection maps the mesh onto the faces of a cube, which is then unfolded. It projects the mesh onto six separate planes, creating six UV islands. In the UV editor, these will appear overlapped, but can be moved. See Editing UVs.
Tùy Chọn
- Kích Thước Lập Phương
Di chuyển tọa độ gốc của đường cong tới điểm đầu tiên.
Sắp Đặt Chung/thông thường/phổ biến/chung
The following settings are common for the Cube, Cylinder, and Sphere mappings:
- Giữ Đúng Tỷ Lệ Tương Quan
Map UVs will take the images aspect ratio into consideration. If an image has already been mapped to the Texture Space that is non-square, the projection will take this into account and distort the mapping to appear correct.
- Hạn Định trong Ranh Giới
Any UVs that lie outside the (0 to 1) range will be clipped to that range by being moved to the UV space border it is closest to.
- Tỷ Lệ Hóa cho Khít Ranh Giới
If the UV map is larger than the (0 to 1) range, the entire map will be scaled to fit inside.
Phóng Chiếu Hình Trụ
Tham Chiếu
- Trình Biên Soạn
Cổng Nhìn 3D
- Chế Độ
Chế Độ Biên Soạn
- Trình Đơn
- Tổ Hợp Phím Tắt
NumpadSlash
Normally, to unwrap a cylinder (tube) as if you slit it lengthwise and folded it flat, Blender wants the view to be vertical, with the tube standing "up". Different views will project the tube onto the UV map differently, skewing the image if used. However, you can set the axis on which the calculation is done manually.
Tùy Chọn
- Chiều Hướng
- Góc Nhìn trên các Cực
Use when viewing from the top (at a pole) by using an axis that is straight down from the view.
- Góc Nhìn trên Xích Đạo
Use if view is looking at the equator, by using a vertical axis.
- Canh Hàng theo Vật Thể
Uses the object's transform to calculate the axis.
- Canh Hàng
Select which axis is up.
- Cực ZX
Polar 0 is on the X axis.
- Cực ZY
Polar 0 is on the Y axis.
- Bán Kính
The radius of the cylinder to use.
Phóng Chiếu Hình Cầu
Tham Chiếu
- Trình Biên Soạn
Cổng Nhìn 3D
- Chế Độ
Chế Độ Biên Soạn
- Trình Đơn
- Tổ Hợp Phím Tắt
NumpadSlash
Spherical mappings is similar to cylinder but the difference is that a cylindrical mapping projects the UVs on a plane toward the cylinder shape, while a spherical map takes into account the sphere's curvature, and each latitude line becomes evenly spaced. Sphere Projection is useful for spherical shapes, like eyes, planets, etc.
Recall the opening cartographer's approaching to mapping the world? Well, you can achieve the same here when unwrapping a sphere from different points of view. Normally, to unwrap a sphere, view the sphere with the poles at the top and bottom. After unwrapping, Blender will give you an equirectangular projection; the point at the equator facing you will be in the middle of the image. A polar view will give a very different but common projection map. Using an equirectangular projection map of the earth as the UV image will give a good planet mapping onto the sphere.
Using an equirectangular image with a Sphere Projection.
Tùy Chọn
- Chiều Hướng
- Góc Nhìn trên các Cực
Use when viewing from the top (at a pole) by using an axis that is straight down from the view.
- Góc Nhìn trên Xích Đạo
Use if view is looking at the equator, by using a vertical axis.
- Canh Hàng theo Vật Thể
Uses the object's transform to calculate the axis.
- Canh Hàng
Select which axis is up.
- Cực ZX
Polar 0 is on the X axis.
- Cực ZY
Polar 0 is on the Y axis.
- Bán Kính
The radius of the sphere to use.
Phóng Chiếu từ Góc Nhìn
Tham Chiếu
- Trình Biên Soạn
Cổng Nhìn 3D
- Chế Độ
Chế Độ Biên Soạn
- Trình Đơn
- Tổ Hợp Phím Tắt
NumpadSlash
Project from View takes the current view in the 3D Viewport and flattens the mesh as it appears. Use this option if you are using a picture of a real object as a UV Texture for an object that you have modeled. You will get stretching in areas where the model recedes away from you.
Tùy Chọn
Tùy Chọn Chung -- Common Options.
- Chính Giao
Apply an orthographic projection.
Phóng Chiếu từ Góc Nhìn (Ranh Giới)
Tham Chiếu
- Trình Biên Soạn
Cổng Nhìn 3D
- Chế Độ
Chế Độ Biên Soạn
- Trình Đơn
- Tổ Hợp Phím Tắt
NumpadSlash
Similar to Project from View, but with Scale to Bounds and Correct Aspect activated.
Hoàn Lại
Tham Chiếu
- Trình Biên Soạn
Thành Tố Điều Khiển Tiêu Đề trong Cổng Nhìn 3D
- Chế Độ
Chế Độ Biên Soạn
- Trình Đơn
- Tổ Hợp Phím Tắt
NumpadSlash
Reset UVs maps each face to fill the UV grid, giving each face the same mapping.
If you want to use an image that is tileable, the surface will be covered in a smooth repetition of that image, with the image skewed to fit the shape of each individual face. Use this unwrapping option to reset the map and undo any unwrapping (go back to the start).