Timeline#
The Timeline editor is used to jump to different frames, manipulate keyframes, and control animation playback.
The Timeline.#
Main View#
The X axis represents time, with the numbers 0/50/100/… being frame numbers. The blue line is the Playhead indicating the current frame, and the diamond shapes are Keyframes, points where you specified a certain value for a certain property at a certain time.
Adjusting the View#
Panning is done by dragging MMB.
Zooming is done by dragging Ctrl-MMB, rolling the mouse Wheel, or pressing NumpadMinus/NumpadPlus.
You can also use the scrollbars located at the bottom and the right of the editor.
Playhead#
Playhead.#
The Playhead is the blue vertical line showing the current frame number.
It can be moved to a new position by clicking or dragging LMB in the scrubbing area at the top.
You can also move it in single-frame increments by pressing Left or Right, or jump to the beginning or end frame by pressing Shift-Left or Shift-Right.
Frame Range#
The Frame Range determines the length of the scene’s animation. By default, it’s set to start at frame 1 and end at frame 250. You can change this using the Start/End inputs in the Timeline header, or in the Output Properties.
Keyframes#
By default, the timeline only shows keyframes for selected items. You can make it show all keyframes by unchecking .
You can click a keyframe to select it (and deselect all others), or click it while holding Shift to add it to the selection (or remove it if it was already selected). You can also drag a box to select multiple keyframes in one go.
To move the selected keyframes, simply drag one of them. Alternatively, you can press G, move the mouse, and click LMB to confirm (or RMB to cancel). You can also press S to scale the keyframes in relation to the Playhead.
Markers#
See the Markers page for more information.
Header#
Popovers for Playback and Keying; transport controls; and frame controls#
Popovers#
Playback Popover#
- Sync
3D Viewport red FPS.#
If animation playback can’t keep up with the desired Frame Rate, the actual frame rate (shown in the top left corner of the 3D Viewport) will turn red, and the Sync option determines how the situation should be handled.
- Play Every Frame
Play every frame, even if this results in the animation playing slower than intended.
- Frame Dropping
Drop frames if playback becomes slower than the scene’s frame rate.
- Sync to Audio
Drop frames if playback becomes too slow to remain synced with audio.
- Audio
- Scrubbing
Play bits of the sound in the animation (if there is any) while you drag the Playhead around.
- Play Audio
Uncheck to mute all sound.
- Playback
- Limit to Frame Range
Don’t allow moving the Playhead outside of the Frame Range using the mouse.
- Follow Current Frame
Automatically pan the view to catch up when the Playhead goes off screen.
- Play In
Which editors to update on each animation frame. If an editor is unchecked, it’ll only be updated once playback stops (with some exceptions where it’ll update on each frame anyway). When starting playback in either the Graph Editor, Dope Sheet or the NLA Editor, all editors will play back regardless of the settings. This is a feature requested by animators to easily play back all views.
- Show
- Subframes
Display and allow changing the current scene subframe.
- Set Start/End Frame
Set the scene’s start/end frame to the current frame. If the Preview Range is active (see Frame Controls), that one is changed instead.
Keying Popover#
The Keying popover contains options that affect keyframe insertion.
- Active Keying Set
Timeline Keying Sets.#
A Keying Set is a named collection of animatable properties. If you select one and then press I while not hovering over any input field, Blender will create keyframes for the properties in that keying set.
If you don’t have a keying set selected, you’ll get keyframes on a default set of properties instead (e.g. Location/Rotation/Scale for objects).
There are a number of predefined keying sets, but you can also create your own in the Keying Sets panel.
- Insert Keyframes (plus icon) I
Insert keyframes on the current frame.
- Delete Keyframes (cross icon) Alt-I
Delete keyframes on the current frame.
- New Keyframe Type
The keyframe type for newly created keyframes.
- Cycle-Aware Keying
When inserting keyframes into trivially cyclic curves, special handling is applied to preserve the cycle integrity (most useful while tweaking an established cycle):
If a key insertion is attempted outside of the main time range of the cycle, it is remapped back inside the range.
When overwriting one of the end keys, the other one is updated accordingly.
In addition, when adding a new curve into an action with a Manual Frame Range and Cyclic Animation enabled, the curve is automatically made cyclic with the period matching the frame range. For convenience, this check and conversion is also done before adding the second keyframe to such a curve.
Auto Keying#
Auto Keying button.#
When the record button (⏺) is enabled, Blender will automatically create keyframes on the current frame whenever you transform an object or bone in the 3D Viewport (or change one of its transform properties in the Properties Editor).
One special use case is to record a camera path as you fly through the scene. See Fly/Walk Navigation.
Note
Auto Keying only works for transform properties (Location, Rotation, Scale). It won’t create a keyframe if you change, say, the color of a material – you still have to do that manually.
- Mode
- Add & Replace
Add or replace keyframes as needed.
- Replace
Only replace existing keyframes.
- Only Active Keying Set
By default, Auto Keying will create keyframes even for properties that are not in the active keying set. Use this checkbox to change that.
- Layered Recording
Adds a new NLA Track for every pass made over the animation to allow non-destructive tweaking.
Menus#
View Menu#
- Adjust Last Operation
Displays a pop-up panel to alter properties of the last completed operation. See Adjust Last Operation.
- Channels
Show or hide the Channels region (the tree of objects and animatable properties on the left).
- Frame All Home
Pans and zooms the view so that all keyframes are visible.
- Frame Scene/Preview Range
Reset the horizontal view to the current scene frame range, taking the preview range into account if it is active.
- Go to Current Frame Numpad0
Centers the Timeline to the Playhead.
- Show Markers
Shows the Markers region (if any markers are defined). When disabled, the Marker Menu is also hidden and marker operators are not available in this editor.
- Show Seconds Ctrl-T
Shows the time on the X axis and the Playhead as timestamps instead of frame numbers. A timestamp such as
01:03+02means “1 minute, 3 seconds, 2 frames.”- Sync Visible Range
Synchronizes the horizontal panning and scale of the editor with other time-based editors that also have this option enabled. That way, they always show the same section of time.
- Only Show Selected
Only show keyframes related to the selected items. This could be objects, bones, nodes, and so on.
- Only Show Errors
Only show curves and drivers that are disabled or have errors. Useful for debugging.
- Cache
- Show Cache
Which simulation caches to show on the timeline.
Baked simulations will be shown as fully opaque, cached simulations will be slightly transparent, and invalid caches will be slightly transparent with dark diagonal stripes.
Timeline Cache.#
- Area
Area controls. See the user interface documentation for more information.
Marker Menu#
Markers are used to denote frames with key points or significant events within an animation. Like in most animation editors, they’re shown at the bottom of the Timeline.
Markers in an animation editor.#
For descriptions of the different marker tools, see Editing Markers.
Transport Controls#
These buttons are used to set the current frame and control playback.
Transport controls.#
- Jump to Start (❙⏴) Shift-Left
Sets the Playhead to the start of the frame range.
- Jump to Previous Keyframe (◆⏴) Down
Moves the Playhead to the previous keyframe.
- Rewind (◀) Shift-Ctrl-Spacebar
Starts playing the animation in reverse.
- Play (▶) Spacebar
Starts playing the animation.
- Jump to Next Keyframe (⏵◆) Up
Moves the Playhead to the next keyframe.
- Jump to End (⏵❙) Shift-Right
Sets the Playhead to the end of the frame range.
- Pause (⏸) Spacebar
Stops playing the animation.
Frame Controls#
- Current Frame Alt-Wheel
The number of the frame that’s currently being displayed in the 3D Viewport. This is also the location of the Playhead.
- Use Preview Range (clock icon)
The Preview Range is an alternative Frame Range that you can use for focusing on a particular part of the animation. It lets you repeatedly play a short segment without having to manually rewind or change the frame range of the entire scene.
This range only affects the preview in the 3D Viewport; it doesn’t affect rendering.
The boundaries of the Preview Range are shown in dark orange. You can quickly configure and enable it by pressing P and dragging a box. To disable it, you can press Alt-P.
- Start/End Frame
The start/end frame of the scene (or the preview range, if active).