Brush(ID)#

base classes — bpy_struct, ID

class bpy.types.Brush(ID)#

Brush data-block for storing brush settings for painting and sculpting

area_radius_factor#

Ratio between the brush radius and the radius that is going to be used to sample the area center

Type:

float in [0, 2], default 0.5

auto_smooth_factor#

Amount of smoothing to automatically apply to each stroke

Type:

float in [0, 1], default 0.0

automasking_boundary_edges_propagation_steps#

Distance where boundary edge automasking is going to protect vertices from the fully masked edge

Type:

int in [1, 20], default 1

automasking_cavity_blur_steps#

The number of times the cavity mask is blurred

Type:

int in [0, 25], default 0

automasking_cavity_curve#

Curve used for the sensitivity

Type:

CurveMapping, (readonly)

automasking_cavity_factor#

The contrast of the cavity mask

Type:

float in [0, 5], default 1.0

automasking_start_normal_falloff#

Extend the angular range with a falloff gradient

Type:

float in [0.0001, 1], default 0.25

automasking_start_normal_limit#

The range of angles that will be affected

Type:

float in [0.0001, 3.14159], default 0.349066

automasking_view_normal_falloff#

Extend the angular range with a falloff gradient

Type:

float in [0.0001, 1], default 0.25

automasking_view_normal_limit#

The range of angles that will be affected

Type:

float in [0.0001, 3.14159], default 1.5708

blend#

Brush blending mode

  • MIX Mix – Use Mix blending mode while painting.

  • DARKEN Darken – Use Darken blending mode while painting.

  • MUL Multiply – Use Multiply blending mode while painting.

  • COLORBURN Color Burn – Use Color Burn blending mode while painting.

  • LINEARBURN Linear Burn – Use Linear Burn blending mode while painting.

  • LIGHTEN Lighten – Use Lighten blending mode while painting.

  • SCREEN Screen – Use Screen blending mode while painting.

  • COLORDODGE Color Dodge – Use Color Dodge blending mode while painting.

  • ADD Add – Use Add blending mode while painting.

  • OVERLAY Overlay – Use Overlay blending mode while painting.

  • SOFTLIGHT Soft Light – Use Soft Light blending mode while painting.

  • HARDLIGHT Hard Light – Use Hard Light blending mode while painting.

  • VIVIDLIGHT Vivid Light – Use Vivid Light blending mode while painting.

  • LINEARLIGHT Linear Light – Use Linear Light blending mode while painting.

  • PINLIGHT Pin Light – Use Pin Light blending mode while painting.

  • DIFFERENCE Difference – Use Difference blending mode while painting.

  • EXCLUSION Exclusion – Use Exclusion blending mode while painting.

  • SUB Subtract – Use Subtract blending mode while painting.

  • HUE Hue – Use Hue blending mode while painting.

  • SATURATION Saturation – Use Saturation blending mode while painting.

  • COLOR Color – Use Color blending mode while painting.

  • LUMINOSITY Value – Use Value blending mode while painting.

  • ERASE_ALPHA Erase Alpha – Erase alpha while painting.

  • ADD_ALPHA Add Alpha – Add alpha while painting.

Type:

enum in [‘MIX’, ‘DARKEN’, ‘MUL’, ‘COLORBURN’, ‘LINEARBURN’, ‘LIGHTEN’, ‘SCREEN’, ‘COLORDODGE’, ‘ADD’, ‘OVERLAY’, ‘SOFTLIGHT’, ‘HARDLIGHT’, ‘VIVIDLIGHT’, ‘LINEARLIGHT’, ‘PINLIGHT’, ‘DIFFERENCE’, ‘EXCLUSION’, ‘SUB’, ‘HUE’, ‘SATURATION’, ‘COLOR’, ‘LUMINOSITY’, ‘ERASE_ALPHA’, ‘ADD_ALPHA’], default ‘MIX’

blur_kernel_radius#

Radius of kernel used for soften and sharpen in pixels

Type:

int in [1, 10000], default 2

blur_mode#
Type:

enum in [‘BOX’, ‘GAUSSIAN’], default ‘GAUSSIAN’

boundary_deform_type#

Deformation type that is used in the brush

Type:

enum in [‘BEND’, ‘EXPAND’, ‘INFLATE’, ‘GRAB’, ‘TWIST’, ‘SMOOTH’], default ‘BEND’

boundary_falloff_type#

How the brush falloff is applied across the boundary

  • CONSTANT Constant – Applies the same deformation in the entire boundary.

  • RADIUS Brush Radius – Applies the deformation in a localized area limited by the brush radius.

  • LOOP Loop – Applies the brush falloff in a loop pattern.

  • LOOP_INVERT Loop and Invert – Applies the falloff radius in a loop pattern, inverting the displacement direction in each pattern repetition.

Type:

enum in [‘CONSTANT’, ‘RADIUS’, ‘LOOP’, ‘LOOP_INVERT’], default ‘CONSTANT’

boundary_offset#

Offset of the boundary origin in relation to the brush radius

Type:

float in [0, 30], default 0.0

brush_capabilities#

Brush’s capabilities

Type:

BrushCapabilities, (readonly, never None)

clone_alpha#

Opacity of clone image display

Type:

float in [0, 1], default 0.5

clone_image#

Image for clone brushes

Type:

Image

clone_offset#
Type:

mathutils.Vector of 2 items in [-inf, inf], default (0.0, 0.0)

cloth_constraint_softbody_strength#

How much the cloth preserves the original shape, acting as a soft body

Type:

float in [0, 1], default 0.0

cloth_damping#

How much the applied forces are propagated through the cloth

Type:

float in [0.01, 1], default 0.01

cloth_deform_type#

Deformation type that is used in the brush

Type:

enum in [‘DRAG’, ‘PUSH’, ‘PINCH_POINT’, ‘PINCH_PERPENDICULAR’, ‘INFLATE’, ‘GRAB’, ‘EXPAND’, ‘SNAKE_HOOK’], default ‘DRAG’

cloth_force_falloff_type#

Shape used in the brush to apply force to the cloth

Type:

enum in [‘RADIAL’, ‘PLANE’], default ‘RADIAL’

cloth_mass#

Mass of each simulation particle

Type:

float in [0.01, 2], default 1.0

cloth_sim_falloff#

Area to apply deformation falloff to the effects of the simulation

Type:

float in [0, 1], default 0.75

cloth_sim_limit#

Factor added relative to the size of the radius to limit the cloth simulation effects

Type:

float in [0.1, 10], default 2.5

cloth_simulation_area_type#

Part of the mesh that is going to be simulated when the stroke is active

  • LOCAL Local – Simulates only a specific area around the brush limited by a fixed radius.

  • GLOBAL Global – Simulates the entire mesh.

  • DYNAMIC Dynamic – The active simulation area moves with the brush.

Type:

enum in [‘LOCAL’, ‘GLOBAL’, ‘DYNAMIC’], default ‘LOCAL’

color#
Type:

mathutils.Color of 3 items in [0, inf], default (1.0, 1.0, 1.0)

color_type#

Use single color or gradient when painting

  • COLOR Color – Paint with a single color.

  • GRADIENT Gradient – Paint with a gradient.

Type:

enum in [‘COLOR’, ‘GRADIENT’], default ‘COLOR’

crease_pinch_factor#

How much the crease brush pinches

Type:

float in [0, 1], default 0.5

cursor_color_add#

Color of cursor when adding

Type:

float array of 4 items in [0, inf], default (1.0, 0.39, 0.39, 0.9)

cursor_color_subtract#

Color of cursor when subtracting

Type:

float array of 4 items in [0, inf], default (0.39, 0.39, 1.0, 0.9)

cursor_overlay_alpha#
Type:

int in [0, 100], default 33

curve#

Editable falloff curve

Type:

CurveMapping, (readonly, never None)

curve_preset#
Type:

enum in Brush Curve Preset Items, default ‘CUSTOM’

curves_sculpt_settings#
Type:

BrushCurvesSculptSettings, (readonly)

curves_sculpt_tool#
Type:

enum in Brush Curves Sculpt Brush Type Items, default ‘COMB’

dash_ratio#

Ratio of samples in a cycle that the brush is enabled

Type:

float in [0, 1], default 1.0

dash_samples#

Length of a dash cycle measured in stroke samples

Type:

int in [1, 10000], default 20

deform_target#

How the deformation of the brush will affect the object

  • GEOMETRY Geometry – Brush deformation displaces the vertices of the mesh.

  • CLOTH_SIM Cloth Simulation – Brush deforms the mesh by deforming the constraints of a cloth simulation.

Type:

enum in [‘GEOMETRY’, ‘CLOTH_SIM’], default ‘GEOMETRY’

density#

Amount of random elements that are going to be affected by the brush

Type:

float in [0, 1], default 0.0

direction#
  • ADD Add – Add effect of brush.

  • SUBTRACT Subtract – Subtract effect of brush.

Type:

enum in [‘ADD’, ‘SUBTRACT’], default ‘ADD’

disconnected_distance_max#

Maximum distance to search for disconnected loose parts in the mesh

Type:

float in [0, 10], default 0.1

elastic_deform_type#

Deformation type that is used in the brush

Type:

enum in [‘GRAB’, ‘GRAB_BISCALE’, ‘GRAB_TRISCALE’, ‘SCALE’, ‘TWIST’], default ‘GRAB’

elastic_deform_volume_preservation#

Poisson ratio for elastic deformation. Higher values preserve volume more, but also lead to more bulging.

Type:

float in [0, 0.9], default 0.0

falloff_angle#

Paint most on faces pointing towards the view according to this angle

Type:

float in [0, 1.5708], default 0.0

falloff_shape#

Use projected or spherical falloff

  • SPHERE Sphere – Apply brush influence in a Sphere, outwards from the center.

  • PROJECTED Projected – Apply brush influence in a 2D circle, projected from the view.

Type:

enum in [‘SPHERE’, ‘PROJECTED’], default ‘SPHERE’

fill_threshold#

Threshold above which filling is not propagated

Type:

float in [0, 100], default 0.2

flow#

Amount of paint that is applied per stroke sample

Type:

float in [0, 1], default 0.0

gpencil_sculpt_tool#
Type:

enum in Brush Gpencil Sculpt Types Items, default ‘SMOOTH’

gpencil_settings#
Type:

BrushGpencilSettings, (readonly)

gpencil_tool#
Type:

enum in Brush Gpencil Types Items, default ‘DRAW’

gpencil_vertex_tool#
Type:

enum in Brush Gpencil Vertex Types Items, default ‘DRAW’

gpencil_weight_tool#
Type:

enum in Brush Gpencil Weight Types Items, default ‘WEIGHT’

grad_spacing#

Spacing before brush gradient goes full circle

Type:

int in [1, 10000], default 0

gradient#
Type:

ColorRamp, (readonly)

gradient_fill_mode#
Type:

enum in [‘LINEAR’, ‘RADIAL’], default ‘LINEAR’

gradient_stroke_mode#
Type:

enum in [‘PRESSURE’, ‘SPACING_REPEAT’, ‘SPACING_CLAMP’], default ‘PRESSURE’

hardness#

How close the brush falloff starts from the edge of the brush

Type:

float in [0, 1], default 0.0

height#

Affectable height of brush (i.e. the layer height for the layer tool)

Type:

float in [0, 1], default 0.5

icon_filepath#

File path to brush icon

Type:

string, default “”, (never None)

image_paint_capabilities#
Type:

BrushCapabilitiesImagePaint, (readonly, never None)

image_tool#
Type:

enum in Brush Image Brush Type Items, default ‘DRAW’

input_samples#

Number of input samples to average together to smooth the brush stroke

Type:

int in [1, 64], default 1

invert_density_pressure#

Invert the modulation of pressure in density

Type:

boolean, default False

invert_flow_pressure#

Invert the modulation of pressure in flow

Type:

boolean, default False

invert_hardness_pressure#

Invert the modulation of pressure in hardness

Type:

boolean, default False

invert_to_scrape_fill#

Use Scrape or Fill brush when inverting this brush instead of inverting its displacement direction

Type:

boolean, default False

invert_wet_mix_pressure#

Invert the modulation of pressure in wet mix

Type:

boolean, default False

invert_wet_persistence_pressure#

Invert the modulation of pressure in wet persistence

Type:

boolean, default False

jitter#

Jitter the position of the brush while painting

Type:

float in [0, 1000], default 0.0

jitter_absolute#

Jitter the position of the brush in pixels while painting

Type:

int in [0, 1000000], default 0

jitter_unit#

Jitter in screen space or relative to brush size

  • VIEW View – Jittering happens in screen space, in pixels.

  • BRUSH Brush – Jittering happens relative to the brush size.

Type:

enum in [‘VIEW’, ‘BRUSH’], default ‘BRUSH’

mask_overlay_alpha#
Type:

int in [0, 100], default 33

mask_stencil_dimension#

Dimensions of mask stencil in viewport

Type:

mathutils.Vector of 2 items in [-inf, inf], default (0.0, 0.0)

mask_stencil_pos#

Position of mask stencil in viewport

Type:

mathutils.Vector of 2 items in [-inf, inf], default (0.0, 0.0)

mask_texture#
Type:

Texture

mask_texture_slot#
Type:

BrushTextureSlot, (readonly)

mask_tool#
Type:

enum in [‘DRAW’, ‘SMOOTH’], default ‘DRAW’

multiplane_scrape_angle#

Angle between the planes of the crease

Type:

float in [0, 160], default 0.0

normal_radius_factor#

Ratio between the brush radius and the radius that is going to be used to sample the normal

Type:

float in [0, 2], default 0.5

normal_weight#

How much grab will pull vertices out of surface during a grab

Type:

float in [0, 1], default 0.0

paint_curve#

Active paint curve

Type:

PaintCurve

plane_offset#

Adjust plane on which the brush acts towards or away from the object surface

Type:

float in [-2, 2], default 0.0

plane_trim#

If a vertex is further away from offset plane than this, then it is not affected

Type:

float in [0, 1], default 0.5

pose_deform_type#

Deformation type that is used in the brush

Type:

enum in [‘ROTATE_TWIST’, ‘SCALE_TRANSLATE’, ‘SQUASH_STRETCH’], default ‘ROTATE_TWIST’

pose_ik_segments#

Number of segments of the inverse kinematics chain that will deform the mesh

Type:

int in [1, 20], default 1

pose_offset#

Offset of the pose origin in relation to the brush radius

Type:

float in [0, 2], default 0.0

pose_origin_type#

Method to set the rotation origins for the segments of the brush

  • TOPOLOGY Topology – Sets the rotation origin automatically using the topology and shape of the mesh as a guide.

  • FACE_SETS Face Sets – Creates a pose segment per face sets, starting from the active face set.

  • FACE_SETS_FK Face Sets FK – Simulates an FK deformation using the Face Set under the cursor as control.

Type:

enum in [‘TOPOLOGY’, ‘FACE_SETS’, ‘FACE_SETS_FK’], default ‘TOPOLOGY’

pose_smooth_iterations#

Smooth iterations applied after calculating the pose factor of each vertex

Type:

int in [0, 100], default 4

rake_factor#

How much grab will follow cursor rotation

Type:

float in [0, 10], default 0.0

rate#

Interval between paints for Airbrush

Type:

float in [0.0001, 10000], default 0.1

sculpt_capabilities#
Type:

BrushCapabilitiesSculpt, (readonly, never None)

sculpt_plane#
Type:

enum in [‘AREA’, ‘VIEW’, ‘X’, ‘Y’, ‘Z’], default ‘AREA’

sculpt_tool#
Type:

enum in Brush Sculpt Brush Type Items, default ‘DRAW’

secondary_color#
Type:

mathutils.Color of 3 items in [0, inf], default (0.0, 0.0, 0.0)

sharp_threshold#

Threshold below which, no sharpening is done

Type:

float in [0, 100], default 0.0

show_multiplane_scrape_planes_preview#

Preview the scrape planes in the cursor during the stroke

Type:

boolean, default False

size#

Radius of the brush in pixels

Type:

int in [1, 5000], default 35

slide_deform_type#

Deformation type that is used in the brush

Type:

enum in [‘DRAG’, ‘PINCH’, ‘EXPAND’], default ‘DRAG’

smear_deform_type#

Deformation type that is used in the brush

Type:

enum in [‘DRAG’, ‘PINCH’, ‘EXPAND’], default ‘DRAG’

smooth_deform_type#

Deformation type that is used in the brush

  • LAPLACIAN Laplacian – Smooths the surface and the volume.

  • SURFACE Surface – Smooths the surface of the mesh, preserving the volume.

Type:

enum in [‘LAPLACIAN’, ‘SURFACE’], default ‘LAPLACIAN’

smooth_stroke_factor#

Higher values give a smoother stroke

Type:

float in [0.5, 0.99], default 0.9

smooth_stroke_radius#

Minimum distance from last point before stroke continues

Type:

int in [10, 200], default 75

snake_hook_deform_type#

Deformation type that is used in the brush

  • FALLOFF Radius Falloff – Applies the brush falloff in the tip of the brush.

  • ELASTIC Elastic – Modifies the entire mesh using elastic deform.

Type:

enum in [‘FALLOFF’, ‘ELASTIC’], default ‘FALLOFF’

spacing#

Spacing between brush daubs as a percentage of brush diameter

Type:

int in [1, 1000], default 10

stencil_dimension#

Dimensions of stencil in viewport

Type:

mathutils.Vector of 2 items in [-inf, inf], default (256.0, 256.0)

stencil_pos#

Position of stencil in viewport

Type:

mathutils.Vector of 2 items in [-inf, inf], default (256.0, 256.0)

strength#

How powerful the effect of the brush is when applied

Type:

float in [0, 10], default 1.0

stroke_method#
  • DOTS Dots – Apply paint on each mouse move step.

  • DRAG_DOT Drag Dot – Allows a single dot to be carefully positioned.

  • SPACE Space – Limit brush application to the distance specified by spacing.

  • AIRBRUSH Airbrush – Keep applying paint effect while holding mouse (spray).

  • ANCHORED Anchored – Keep the brush anchored to the initial location.

  • LINE Line – Draw a line with dabs separated according to spacing.

  • CURVE Curve – Define the stroke curve with a Bézier curve (dabs are separated according to spacing).

Type:

enum in [‘DOTS’, ‘DRAG_DOT’, ‘SPACE’, ‘AIRBRUSH’, ‘ANCHORED’, ‘LINE’, ‘CURVE’], default ‘DOTS’

surface_smooth_current_vertex#

How much the position of each individual vertex influences the final result

Type:

float in [0, 1], default 0.0

surface_smooth_iterations#

Number of smoothing iterations per brush step

Type:

int in [1, 10], default 0

surface_smooth_shape_preservation#

How much of the original shape is preserved when smoothing

Type:

float in [0, 1], default 0.0

texture#
Type:

Texture

texture_overlay_alpha#
Type:

int in [0, 100], default 33

texture_sample_bias#

Value added to texture samples

Type:

float in [-1, 1], default 0.0

texture_slot#
Type:

BrushTextureSlot, (readonly)

tilt_strength_factor#

How much the tilt of the pen will affect the brush

Type:

float in [0, 1], default 0.0

tip_roundness#

Roundness of the brush tip

Type:

float in [0, 1], default 1.0

tip_scale_x#

Scale of the brush tip in the X axis

Type:

float in [0, 1], default 1.0

topology_rake_factor#

Automatically align edges to the brush direction to generate cleaner topology and define sharp features. Best used on low-poly meshes as it has a performance impact.

Type:

float in [0, 1], default 0.0

unprojected_radius#

Radius of brush in Blender units

Type:

float in [0.001, inf], default 0.05

use_accumulate#

Accumulate stroke daubs on top of each other

Type:

boolean, default False

use_adaptive_space#

Space daubs according to surface orientation instead of screen space

Type:

boolean, default False

use_airbrush#

Keep applying paint effect while holding mouse (spray)

Type:

boolean, default False

use_alpha#

When this is disabled, lock alpha while painting

Type:

boolean, default False

use_anchor#

Keep the brush anchored to the initial location

Type:

boolean, default False

use_automasking_boundary_edges#

Do not affect non manifold boundary edges

Type:

boolean, default False

use_automasking_boundary_face_sets#

Do not affect vertices that belong to a Face Set boundary

Type:

boolean, default False

use_automasking_cavity#

Do not affect vertices on peaks, based on the surface curvature

Type:

boolean, default False

use_automasking_cavity_inverted#

Do not affect vertices within crevices, based on the surface curvature

Type:

boolean, default False

use_automasking_custom_cavity_curve#

Use custom curve

Type:

boolean, default False

use_automasking_face_sets#

Affect only vertices that share Face Sets with the active vertex

Type:

boolean, default False

use_automasking_start_normal#

Affect only vertices with a similar normal to where the stroke starts

Type:

boolean, default False

use_automasking_topology#

Affect only vertices connected to the active vertex under the brush

Type:

boolean, default False

use_automasking_view_normal#

Affect only vertices with a normal that faces the viewer

Type:

boolean, default False

use_automasking_view_occlusion#

Only affect vertices that are not occluded by other faces (Slower performance)

Type:

boolean, default False

use_cloth_collision#

Collide with objects during the simulation

Type:

boolean, default False

use_cloth_pin_simulation_boundary#

Lock the position of the vertices in the simulation falloff area to avoid artifacts and create a softer transition with unaffected areas

Type:

boolean, default False

use_color_as_displacement#

Handle each pixel color as individual vector for displacement (area plane mapping only)

Type:

boolean, default False

use_connected_only#

Affect only topologically connected elements

Type:

boolean, default False

use_cursor_overlay#

Show cursor in viewport

Type:

boolean, default False

use_cursor_overlay_override#

Don’t show overlay during a stroke

Type:

boolean, default False

use_curve#

Define the stroke curve with a Bézier curve. Dabs are separated according to spacing.

Type:

boolean, default False

use_custom_icon#

Set the brush icon from an image file

Type:

boolean, default False

use_density_pressure#

Use pressure to modulate density

Type:

boolean, default False

use_edge_to_edge#

Drag anchor brush from edge-to-edge

Type:

boolean, default False

use_flow_pressure#

Use pressure to modulate flow

Type:

boolean, default False

use_frontface#

Brush only affects vertices that face the viewer

Type:

boolean, default False

use_frontface_falloff#

Blend brush influence by how much they face the front

Type:

boolean, default False

use_grab_active_vertex#

Apply the maximum grab strength to the active vertex instead of the cursor location

Type:

boolean, default False

use_grab_silhouette#

Grabs trying to automask the silhouette of the object

Type:

boolean, default False

use_hardness_pressure#

Use pressure to modulate hardness

Type:

boolean, default False

use_inverse_smooth_pressure#

Lighter pressure causes more smoothing to be applied

Type:

boolean, default False

use_line#

Draw a line with dabs separated according to spacing

Type:

boolean, default False

use_locked_size#

Measure brush size relative to the view or the scene

  • VIEW View – Measure brush size relative to the view.

  • SCENE Scene – Measure brush size relative to the scene.

Type:

enum in [‘VIEW’, ‘SCENE’], default ‘VIEW’

use_multiplane_scrape_dynamic#

The angle between the planes changes during the stroke to fit the surface under the cursor

Type:

boolean, default False

use_offset_pressure#

Enable tablet pressure sensitivity for offset

Type:

boolean, default False

use_original_normal#

When locked keep using normal of surface where stroke was initiated

Type:

boolean, default False

use_original_plane#

When locked keep using the plane origin of surface where stroke was initiated

Type:

boolean, default False

use_paint_antialiasing#

Smooths the edges of the strokes

Type:

boolean, default True

use_paint_grease_pencil#

Use this brush in grease pencil drawing mode

Type:

boolean, default False

use_paint_image#

Use this brush in texture paint mode

Type:

boolean, default True

use_paint_sculpt#

Use this brush in sculpt mode

Type:

boolean, default True

use_paint_sculpt_curves#

Use this brush in sculpt curves mode

Type:

boolean, default False

use_paint_uv_sculpt#

Use this brush in UV sculpt mode

Type:

boolean, default False

use_paint_vertex#

Use this brush in vertex paint mode

Type:

boolean, default True

use_paint_weight#

Use this brush in weight paint mode

Type:

boolean, default True

use_persistent#

Sculpt on a persistent layer of the mesh

Type:

boolean, default False

use_plane_trim#

Limit the distance from the offset plane that a vertex can be affected

Type:

boolean, default False

use_pose_ik_anchored#

Keep the position of the last segment in the IK chain fixed

Type:

boolean, default False

use_pose_lock_rotation#

Do not rotate the segment when using the scale deform mode

Type:

boolean, default False

use_pressure_area_radius#

Enable tablet pressure sensitivity for area radius

Type:

boolean, default False

use_pressure_jitter#

Enable tablet pressure sensitivity for jitter

Type:

boolean, default False

use_pressure_masking#

Pen pressure makes texture influence smaller

Type:

enum in [‘NONE’, ‘RAMP’, ‘CUTOFF’], default ‘NONE’

use_pressure_size#

Enable tablet pressure sensitivity for size

Type:

boolean, default False

use_pressure_spacing#

Enable tablet pressure sensitivity for spacing

Type:

boolean, default False

use_pressure_strength#

Enable tablet pressure sensitivity for strength

Type:

boolean, default True

use_primary_overlay#

Show texture in viewport

Type:

boolean, default False

use_primary_overlay_override#

Don’t show overlay during a stroke

Type:

boolean, default False

use_restore_mesh#

Allow a single dot to be carefully positioned

Type:

boolean, default False

use_scene_spacing#

Calculate the brush spacing using view or scene distance

  • VIEW View – Calculate brush spacing relative to the view.

  • SCENE Scene – Calculate brush spacing relative to the scene using the stroke location.

Type:

enum in [‘VIEW’, ‘SCENE’], default ‘VIEW’

use_secondary_overlay#

Show texture in viewport

Type:

boolean, default False

use_secondary_overlay_override#

Don’t show overlay during a stroke

Type:

boolean, default False

use_smooth_stroke#

Brush lags behind mouse and follows a smoother path

Type:

boolean, default False

use_space#

Limit brush application to the distance specified by spacing

Type:

boolean, default True

use_space_attenuation#

Automatically adjust strength to give consistent results for different spacings

Type:

boolean, default True

use_vertex_grease_pencil#

Use this brush in grease pencil vertex color mode

Type:

boolean, default False

use_wet_mix_pressure#

Use pressure to modulate wet mix

Type:

boolean, default False

use_wet_persistence_pressure#

Use pressure to modulate wet persistence

Type:

boolean, default False

vertex_paint_capabilities#
Type:

BrushCapabilitiesVertexPaint, (readonly, never None)

vertex_tool#
Type:

enum in Brush Vertex Brush Type Items, default ‘DRAW’

weight#

Vertex weight when brush is applied

Type:

float in [0, 1], default 1.0

weight_paint_capabilities#
Type:

BrushCapabilitiesWeightPaint, (readonly, never None)

weight_tool#
Type:

enum in Brush Weight Brush Type Items, default ‘DRAW’

wet_mix#

Amount of paint that is picked from the surface into the brush color

Type:

float in [0, 1], default 0.0

wet_paint_radius_factor#

Ratio between the brush radius and the radius that is going to be used to sample the color to blend in wet paint

Type:

float in [0, 2], default 0.5

wet_persistence#

Amount of wet paint that stays in the brush after applying paint to the surface

Type:

float in [0, 1], default 0.0

classmethod bl_rna_get_subclass(id, default=None)#
Parameters:

id (string) – The RNA type identifier.

Returns:

The RNA type or default when not found.

Return type:

bpy.types.Struct subclass

classmethod bl_rna_get_subclass_py(id, default=None)#
Parameters:

id (string) – The RNA type identifier.

Returns:

The class or default when not found.

Return type:

type

Inherited Properties#

Inherited Functions#

References#