Menú Trazo#

This page covers many of the tools in the Strokes menu. These are tools that work primarily on strokes, however, some also work with point selections.

Subdividir#

Referencia

Modo:: Modo Edición
Menú:: Trazo ‣ Subdividir

Subdivides the strokes by inserting points between the selected points.

Cantidad de cortes: El número de subdivisiones a realizar.
Suavizado: The amount of the smoothness on subdivided points.
Repetir: Number of times to repeat the procedure.
Puntos seleccionados: When enabled, limits the effect to only the selected points within the stroke.
Posición: When enabled, the operator affect the points location.
Grosor: When enabled, the operator affect the points thickness.
Intensidad: When enabled, the operator affect the points strength (alpha).
UV: When enabled, the operator affect the UV rotation on the points.

Simplificar#

Referencia

Modo:: Modo Edición
Menú:: Trazo ‣ Simplificar

Reduce the amount of points in the strokes.

Fijo#

Deletes alternated points in the strokes, except the start and end points.

Intervalos: The number of times to repeat the procedure.

Adaptativo#

Uses the RDP algorithm (Ramer-Douglas-Peucker algorithm) for points deletion. The algorithm tries to obtain a similar line shape with fewer points.

Factor: Controls the amount of recursively simplifications applied by the algorithm.

Tomar muestra#

Recreates the stroke geometry with a predefined length between points.

Longitud: The distance between points on the recreated stroke. Smaller values will require more points to recreate the stroke, while larger values will result in fewer points needed to recreate the curve.
Sharp Threshold: The maximum angle between points on the recreated stroke. Smaller values will require more points to recreate the stroke, while larger values will result in fewer points needed to recreate the curve.

Recortar#

Referencia

Modo:: Modo Edición
Menú:: Trazo ‣ Recortar

Trims selected stroke to first loop or intersection.

../../../_images/grease-pencil_modes_edit_stroke-menu_trim-1.png — Original stroke.#

../../../_images/grease-pencil_modes_edit_stroke-menu_trim-2.png — Result of trim operation.#

Contorno#

Referencia

Modo:: Modo Edición
Menú:: Stroke ‣ Outline

Converts a stroke to an outline.

Vista

The projection method to generate the outline

Vista:: Use the viewport’s view as a projection.
Frontal:: Use the X-Z axes view as a projection.
Lado:: use the Y-Z axis view as a projection
Superior:: Use the X-Y axes view as a projection
Cámara:: Use the view from the active camera as a projection.

Modo Material

How materials are assigned to the outline.

Active Material:: The stroke outline will be assigned the active material.
Keep Material:: The stoke outline will have the same material as before.
New Material:: A new material will be created and assigned to the outline.

Grosor

Thickness of the stroke perimeter.

Mantener forma

Try to keep global shape when the stroke thickness change.

Subdivisiones

Number of subdivisions for the start and end caps.

Sample Length

The length each resulting segment of the outline. Smaller values create outlines closer to the original shape.

../../../_images/grease-pencil_modes_edit_stroke-menu_outline-1.png — Original stroke.#

../../../_images/grease-pencil_modes_edit_stroke-menu_outline-2.png — Generated stroke after outline operation.#

Unir#

Referencia

Modo:: Modo Edición
Menú:: Stroke ‣ Join ‣ Join, Join and Copy
Atajo:: Ctrl-J, Shift-Ctrl-J

Join two or more strokes into a single one.

Tipo

Join Ctrl-J: Join selected strokes by connecting points.
Join and Copy Shift-Ctrl-J: Join selected strokes by connecting points in a new stroke.

Preservar huecos

When enabled, do not use geometry to connect the strokes.

Mover a capa#

Referencia

Modo:: Modo Edición
Menú:: Trazo ‣ Mover a capa
Atajo:: M

A pop-up menu to move the stroke to a different layer. You can choose the layer to move the selected strokes to from a list of layers of the current Grease Pencil object. You can also add a new layer to move the selected stroke to. When creating a new layer, there is another pop-up to type in the name of the new layer.

Asignar material#

Referencia

Modo:: Modo Edición
Menú:: Trazo ‣ Asignar material

Changes the material linked to the selected stroke. You can choose the name of the material to be used by the selected stroke from a list of materials of the current Grease Pencil object.

Definir como material activo#

Referencia

Modo:: Modo Edición
Menú:: Trazo ‣ Definir como material activo

Definirá el material activo del objeto basándose en el material del trazo seleccionado.

Ordenar#

Referencia

Modo:: Modo Edición
Menú:: Trazo ‣ Ordenar

Change the drawing order of the strokes in the 2D layer.

Traer al frente: Moves to the top the selected points/strokes.
Traer hacia adelante: Moves the selected points/strokes upper the next one in the drawing order.
Enviar hacia atrás: Moves the selected points/strokes below the previous one in the drawing order.
Enviar al fondo: Moves to the bottom the selected points/strokes.

Cerrar#

Referencia

Modo:: Modo Edición
Menú:: Trazo ‣ Cerrar
Atajo:: F

Close or open strokes by connecting the last and first point.

Tipo

Cerrar todos: Close all open selected strokes.
Abrir todos: Open all closed selected strokes.
Alternar: Close or Open selected strokes as required.

Create Geometry

When enabled, points are added for closing the strokes. If disabled, the operator act the same as Toggle Cyclic.

Alternar la opción Cíclica#

Referencia

Modo:: Modo Edición
Menú:: Trazo ‣ Cíclico

Toggles between an open stroke and closed stroke (cyclic).

Tipo

Cerrar todos: Close all open selected strokes.
Abrir todos: Open all closed selected strokes.
Alternar: Close or Open selected strokes as required.
Create Geometry: When enabled, points are added for closing the strokes like when using the Close tool. If disabled, the stroke is close without any actual geometry.

Toggle Caps#

Referencia

Modo:: Modo Edición
Menú:: Stroke ‣ Toggle Caps

Toggle ending cap styles of the stroke.

Predefinido: Sets stroke start and end points to rounded (default).
Ambos: Toggle stroke start and end points caps to flat or rounded.
Inicio: Toggle stroke start point cap to flat or rounded.
Fin: Toggle stroke end point cap to flat or rounded.

../../../_images/grease-pencil_modes_edit_stroke-menu_cap-1.png — Stroke ending with rounded caps.#

../../../_images/grease-pencil_modes_edit_stroke-menu_cap-2.png — Stroke ending with flat caps.#

../../../_images/grease-pencil_modes_edit_stroke-menu_cap-3.png — Stroke ending with combined caps.#

Invertir dirección#

Referencia

Modo:: Modo Edición
Menú:: Trazo ‣ Invertir dirección

Reverse the direction of the points in the selected strokes (i.e. the start point will become the end one, and vice versa).

Set Start Point#

Referencia

Modo:: Modo Edición
Menú:: Stroke ‣ Set Start Point

Set the start point for cyclic strokes.

Normalize Thickness#

Referencia

Modo:: Modo Edición
Menú:: Stroke ‣ Normalize Thickness

Makes the thickness equal for the entire stroke.

Modo: Stroke Property to normalize.
Valor: Thickness value to use on all points of the stroke.

Normalize Opacity#

Referencia

Modo:: Modo Edición
Menú:: Stroke ‣ Normalize Opacity

Makes the opacity equal for the entire stroke.

Modo: Stroke Property to normalize.
Valor: Opacity value to use on all points of the stroke.

Escalar grosor#

Referencia

Modo:: Modo Edición
Menú:: Trazo ‣ Escalar grosor

When enabled, scales the stroke thickness during scale transformations.

Reset Fill Transform#

Referencia

Modo:: Modo Edición
Menú:: Stroke ‣ Reset Fill Transform

Reset all fill translation, scaling and rotations in the selected strokes.