Editing Nodes¶
Трансформувати¶
Посилання
- Меню:
«Вузол > Переміщення, Оберт, Зміна розміру» –
- Скорочення:
G, R, S
You can move the selected node(s) by clicking and dragging any empty part of them. Alternatively, press G, move the mouse, and click LMB to confirm.
Dragging a node on top of an existing link will intelligently insert the selected node into the link path. This generally uses the first socket that matches the link type. The automatic node attachment feature can be toggled with Alt. When a node is automatically attached, the surrounding nodes will be offset to the right or left depending on the T toggle; see Авто-Зсув – Auto-Offset for more information.
While dragging nodes, you can press F to toggle their parent Frame:
If the nodes are inside a frame, they will be detached from it.
If the nodes are not inside a frame and there is a frame under the cursor, they will be attached to that frame.
In general, it is recommended to arrange your nodes so that data flows from left to right, top to bottom.
The width of a node can be changed by dragging its left or right border.
Rotating (R) and scaling (S) only apply when multiple nodes are selected, and only affect their positions.
З’єднання Роз’ємів – Connecting Sockets¶
LMB-click on a socket and drag. «Connect to Output» will see a line coming out of it; this is called a link. Keep dragging and connect the link to an input socket of another node, then release the LMB.
While multiple links can route out of an output socket, typically a single link can be attached to an input socket, that is unless the input is a multi-socket input with looks like a pill shaped socket.
To swap multiple links of a similar type, press and hold Alt while moving a link. This feature also works when adding a new link into a pre-existing socket.
To reposition the outgoing links of a node, rather than adding a new one, hold Ctrl while dragging from an output socket. This works for single as well as for multiple outgoing links.
Nodes that have no connections can be inserted on a link by just move the node over the link and release when the link is highlighted.
- Make Links J
Select multiple nodes with open sockets, then use the Make Links to create links between them. Use Make Links again if there are other nodes which can be connected.
- Make and Replace Links Shift-J
Make and Replace Links працює подібно до Make Links, але воно замінить наявність зв’язки, якщо такі існують.
Роз’єднування Роз’ємів – Disconnecting Sockets¶
Інтерактивно – Interactively¶
Drag the link away from its input socket and let it go, keeping it unconnected.
Mute Links¶
Посилання
- Меню:
- Скорочення:
Ctrl-Alt-RMB
Activate the menu item or hold the key combination, then draw a line across one or more links to mute/unmute them. A muted link acts as though it’s no longer there; this also means the input fields for specifying fixed values become visible again.
When muting links on the input side of a reroute node, the links on its output side will be muted too.
Розрізати Зв’язки – Cut Links¶
Посилання
- Меню:
«Вузол > Розрізати Зв’язки» –
- Скорочення:
Ctrl-RMB
Activate the menu item or hold the key combination, then draw a line across one or more links to delete them.
Примітка
The key combination is normally reserved for Lasso Select. In node editors, lasso selection is instead performed with Ctrl-Alt-LMB.
- Detach Links Alt-LMB drag
Use Detach Links to cut all the links attached to the selected nodes and move the nodes to a new location.
Cut/Copy/Paste¶
Посилання
- Меню:
, ,
- Скорочення:
Ctrl-C, Ctrl-V
These operators allow transferring nodes within a node tree, between different node trees, or even between Blender instances.
- Різання – Cut
Removes the selected nodes and places them on the clipboard. When possible, links are automatically reconnected to preserve the node flow.
- Copy Ctrl-C – Копія
Copies the selected nodes to the clipboard, including the connections between them.
- Вставляння – Paste Ctrl-V
Inserts the nodes from the clipboard into the node tree.
Примітка
Pasted nodes are placed at the same coordinates as when they were copied. The same considerations as duplicating nodes apply.
Порада
Nodes can be copied and pasted between Blender instances. This also works across different node editors, provided the node types are supported by the destination editor.
Duplicate – Дублювання¶
Посилання
- Меню:
«Вузол > Дублювання» –
- Скорочення:
Shift-D
Select one or more nodes, activate the menu item or press the key combination, then move the mouse to a new location and click LMB (or press Return) to place the duplicated node(s).
Примітка
When you duplicate a node, the new node will be positioned exactly on top of the node that was duplicated. If you leave it there (and it is quite easy to do so), you can not easily tell that there are two nodes there! When in doubt, select a node and move it slightly to see if something is hidden underneath.
Duplicate Linked – Дублікат Пов’язано¶
Посилання
- Меню:
- Скорочення:
Alt-D
Duplicate selected nodes, but not their node trees (in the case of group nodes), and move them.
Видалення – Delete¶
Посилання
- Меню:
- Скорочення:
X, Delete
Видаляє вибрані вузол(ли).
Delete with Reconnect¶
Посилання
- Меню:
- Скорочення:
Ctrl-Delete
Deletes the selected node(s), then creates new links connecting their former input nodes to their former output nodes.
Swap¶
Посилання
- Меню:
- Скорочення:
Shift-S
The Swap operator replaces the selected node with another node type chosen from the menu.
All existing links are automatically reconnected where possible, matching input and output sockets by name and type. If a connection cannot be matched, it is left unconnected.
Show/Hide – Показ/Схов¶
Mute – Приглушення¶
Посилання
- Меню:
- Скорочення:
M
Muting a node removes its contribution to the node tree, and makes all links pass through it without change. Links will appear red as an indicator of passing through the muted node.
Порада
Individual node links can be muted with Mute Links.
Node Preview¶
Посилання
- Меню:
- Скорочення:
Shift-H
Shows/Hides a preview region on the node that displays the frame after that node’s operation has been applied. This can also be toggled by clicking the material ball icon in the node header.
Примітка
This operator are only available in the Compositor.
Node Options¶
Посилання
- Меню:
Показує/Ховає усі властивості вузла.
Unconnected Sockets¶
Посилання
- Меню:
- Скорочення:
Ctrl-H
Згортає/Розгортає будь-які роз’єми уводу або виводу, до яких не під’єднані жодні інші вузли.
Стягнення – Collapse¶
Посилання
- Меню:
- Скорочення:
H
Collapses the node so only the node header is visible. This can also be toggled by clicking the triangle on the left of the node header.
Згорнути і Сховати Невикористані Роз’єми – Collapse and Hide Unused Sockets¶
Посилання
- Меню:
- Скорочення:
H
Applies both the Unconnected Sockets and Стягнення – Collapse operations.
Read View Layers¶
Посилання
- Меню:
- Скорочення:
Ctrl-R
Reads all the current scene’s render layers from cache, as needed. This can be used to save RAM while rendering because the render layers do not have to be saved in RAM. And also for recovering some information from a failed render. Щоб це працювало, Cache Result – «Кеш Результату» повинно бути увімкнено.
Примітка
This operator are only available in the Compositor.
Connect to Output¶
Посилання
- Скорочення:
Shift-Alt-LMB
Connect the output of the selected node to the final output of the node tree (Material Output or World Output in Shader, the final Group Output in Geometry Nodes and Compositor, Output in Texture Nodes), or, if the node is inside a group, to the Group Output.