Luces#

Referencia

Panel:: Properties ‣ Light and Shader Editor ‣ Sidebar ‣ Settings

Opciones en común#

Tipo: Define el tipo de luz.
Color: Tinte de color de la luz emitida.

Opciones de motores de procesamiento#

Punto#

../../_images/render_lights_light-object_viewport.png — Luz de tipo Punto.#

The point light is an omni-directional point of light, that is, a point radiating the same amount of light in all directions. It’s visualized by a plain, circled dot. Being a point light source, the direction of the light hitting an object’s surface is determined by the line joining the light and the point on the surface of the object itself. It can be used as simple model of e.g. a light bulb.

Light intensity/energy decays based on (among other variables) distance from the point light to the object. In other words, surfaces that are further away will be rendered darker.

Potencia: Power of the light in Watts. Higher values increase the intensity of the light. Negative values can be set, but should be avoided for predictable and physically based result.

Decaimiento suave: Apply falloff to avoid sharp edges when the light geometry intersects with other objects.

Radio: When larger than zero, light will be emitted from a spherical surfaces with the specified radius. Lights with larger size have softer shadows and specular highlights, and they will also appear dimmer because their power is distributed over a larger area.

Foco#

A spot light emits a cone-shaped beam of light from the tip of the cone, in a given direction.

Potencia: Power of the light in Watts. Higher values increase the intensity of the light. Negative values can be set, but should be avoided for predictable and physically based result.

Decaimiento suave: Apply falloff to avoid sharp edges when the light geometry intersects with other objects.

Radio: When larger than zero, light will be emitted from a spherical surfaces with the specified radius. Lights with larger size have softer shadows and specular highlights.

Haz / Forma del foco#

../../_images/render_lights_light-object_terms.png — Changing the spot options also changes the appearance of the spotlight as displayed in the 3D Viewport.#

Tamaño

The size of the outer cone of a spot, which largely controls the circular area a spot light covers. This slider in fact controls the angle at the top of the lighting cone, and can be between (1.0 to 180.0).

Changing the spot *Size* option.#

Fundido

The Blend slider controls the inner cone of the spot. The Blend value can be between (0.0 to 1.0). The value is proportional and represents that amount of space that the inner cone should occupy inside the outer cone Size.

The inner cone boundary line indicates the point at which light from the spot will start to blur/soften; before this point its light will mostly be full strength. The larger the value of Blend the more blurred/soft the edges of the spotlight will be, and the smaller the inner cone’s circular area will be (as it starts to blur/soften earlier).

To make the spot have a sharper falloff rate and therefore less blurred/soft edges, decrease the value of Blend. Setting Blend to 0.0 results in very sharp spotlight edges, without any transition between light and shadow.

The falloff rate of the spot light is a ratio between the Blend and Size values; the larger the circular gap between the two, the more gradual the light fades between Blend and Size.

Blend and Size only control the spot light cone’s aperture and softness («radial» falloff); they do not control the shadow’s softness as shown below.

../../_images/render_lights_light-object_shadow-spotlight.png — Render showing the soft edge spotlighted area and the sharp/hard object shadow.#

Notice in the picture above that the object’s shadow is sharp as a result of the ray tracing, whereas the spotlight edges are soft. If you want other items to cast soft shadows within the spot area, you will need to alter other shadow settings.

Mostrar cono: Displays a transparent cone in 3D Viewport to visualize which objects are contained in it.

Área#

The area light simulates light originating from a surface (or surface-like) emitter. For example, a TV screen, office neon lights, a window, or a cloudy sky are just a few types of area light. The area light produces shadows with soft borders by sampling a light along a grid the size of which is defined by the user. This is in direct contrast to point-like artificial lights which produce sharp borders.

Potencia: Power of the light in Watts. Higher values increase the intensity of the light. Negative values can be set, but should be avoided for predictable and physically based result.

Forma

Shape of the light.

Rectángulo:: The shape of the light can be represented as a rectangle and changed with the «X» and «Y» values.
Cuadrado:: The shape of the light can be represented as a square and changed with the Size property.
Disco:: The shape of the light can be represented as a disk and changed with the Size property.
Elipse:: The shape of the light can be represented as an ellipse and changed with the X and Y values.

Truco

Choosing the appropriate shape for your area light will enhance the believability of your scene. For example, you may have an indoor scene and would like to simulate light entering through a window. You could place a Rectangular area light in a window (vertical) or from neon lights (horizontal) with proper ratio for Size X and Size Y. For the simulation of the light emitted by a TV screen, a vertical Square area light would be better in most cases.

Tamaño / Tamaño X / Tamaño Y: Dimensions for the Square or Rectangle.

Sol#

A sun light provides light of constant intensity emitted in a single direction from infinitely far away. It can be very handy for a uniform clear daylight open-space illumination. In the 3D Viewport, the sun light is represented by an encircled black dot with rays emitting from it, plus a dashed line indicating the direction of the light.

Nota

This direction can be changed by rotating the sun light, like any other object, but because the light is emitted from a location considered infinitely far away, the location of a sun light does not affect the rendered result.

Intensidad: La potencia de las luces, expresadas en Watts por metros cuadrados. Los valores normales estarán alrededor de 250 para un cielo nublado de día y 1000 o más para un día completamente despejado. Ver más detalles en Potencia de las luces.

Ángulo: El tamaño del Sol de acuerdo a su diámetro angular visto desde la Tierra.

Potencia de las luces#

The power of sun lights is specified in Watts per square meter. The power of point lights, spot lights, and area lights is specified in Watts. But this is not the electrical Watts that consumer light bulbs are rated at. It is Radiant Flux or Radiant Power which is also measured in Watts. It is the energy radiated from the light in the form of visible light.

If you want to set the power to real world values, you have to convert the wattage of consumer bulbs or LED lights to radiant flux, but it is not a straightforward process. The wattage of bulbs means the electrical power required to power them. LED lights have a «Watt equivalent» which is neither the electrical power they require nor the amount of light they put out. Some consumer lights specify lumens or luminous flux which is the radiant flux weighted with the wavelengths perceived by the human eye.

Aquí se muestra una tabla con los valores típicos de potencia para luces de tipo punto, foco y área:

Luz real	Potencia	Tipo de luz sugerido
Vela	0.05 W	Punto (o Apuntar)
Lámpara LED de 800 lm	2.1 W	Punto (o Apuntar)
Lámpara de 1000 lm	2.9 W	Punto (o Apuntar)
Luminaria PAR38 de 1500 lm	4 W	Área (Disco)
Tubo fluorescente de 2500 lm	4.5 W	Área (Rectángulo)
Foco automóvil de 5000 lm	22 W	Foco, apertura 125°

Y una tabla con valores típicos de Potencia para luz de Sol:

Tipo de Sol	Intensidad
Cielo despejado	1000 W/m²
Cielo nuboso	500 W/m²
Cielo nublado	200 W/m²
Luz de Luna	0.001 W/m²

Estos valores podrán producir una iluminación aparente mucho más clara u oscura de lo esperado, la diferencia es debida a que nuestros ojos se adaptan a la iluminación del entorno mientras que un motor de procesamiento no lo hace. De esta forma, para compensar, se deberá ajustar la Exposición en el panel Propiedades ‣ Procesamiento ‣ Opciones de película (sólo para Cycles).

Para obtener resultados realistas, recordar configurar también el tamaño y el color de la luz a valores realistas. El color de las luces también influenciará qué tan brillantes lucirán en el sistema de visión humano. A potencia constante, una luz verde lucirá muy brillante, una roja más oscura y una azul más oscura aún. Así, será posible compensar mediante el uso de la potencia estas diferencias perceptuales.