Edición#
Transformación#
Opciones#
Overlap Mode#
Overlap Mode defines the result of transforming a strip so that it overlaps another strip.
- Shuffle
The overlapping strip will be moved to the nearest free space so that it does not overlap.
- Sobrescribir
The overlapped strip will be overwritten, trimmed or split by the overlapping strip.
- Expand
All strips on the right side of (each) transformed will be shifted forward to accommodate the overlapping strip.
Adherencia#
The icon toggles snapping; you can also do this temporarily by holding Ctrl after starting to drag a strip.
The drop-down arrow offers the following options:
- Adherir a
- Fotograma actual
Snaps the transformed selection to the Playhead.
- Hold Offset
Snaps the transformed selection to the Hold Offset.
- Ignorar
- Muted Strips
Muted Strips are not considered as snap targets.
- Clips de sonido
Sound Strips are not considered as snap targets.
- Fotograma actual
- Snap to Strips
Snaps the Playhead to all strips.
Mover#
Referencia
- Menú:
- Atajo:
G
Pressing G moves all the selected strip(s). Move your mouse horizontally (left/right) to change the strip’s position in time. Move vertically (up/down) to change channels.
Mantener presionado Ctrl mientras se arrastra permite habilitar o deshabilitar la adherencia.
You can also lock the direction to time with X or to change the strip’s channel with Y.
It is possible to move strips using mouse by dragging them while holding LMB. Currently it is possible to move only one strip by dragging.
Start Frame Offset#
The Start Frame Offset for that strip can be selected by clicking LMB on the left handle of the strip; holding it down (or pressing G and then moving the mouse left/right) changes the start frame within the strip by the number of frames you move it. The frame number label under the strip displays the start frame of the strip.
If you have a 20-image sequence strip, and drag the left handle to the right by 10 frames, the strip will start at image 11 (images 1 to 10 will be skipped). Use this to clip off a roll-up or undesired lead-in.
Dragging the left handle left will create a lead-in (copies) of the first frame for as many frames as you drag it. Use this when you want some frames for a transition at the start of the clip.
Fotograma Final#
The End Frame of the strip could be selected by clicking LMB on the right handle of the strip; holding it down (or pressing G) and then moving the mouse changes the ending frame within the strip. The frame number label over the strip displays the end frame of the strip.
Dragging the right handle to the left shortens the clip; any original images at the tail are ignored. Use this to quickly clip off a roll-down.
Dragging the right handle to the right extends the clip. For movies and images sequences, more of the animation is used until exhausted. Extending a clip beyond its length will render as a copy of the last image. Use this for transitions out of this clip.
Nota
Multiple selection
You can select several (handles of) strips by Shift-LMB clicking: when you press G, everything that is selected will move with your mouse – this means that, for example, you can at the same time move a strip, shorten two others, and extend a forth one.
Move/Extend from Current Frame#
Referencia
- Menú:
- Atajo:
E
With a number of strips selected, pressing E lets you interactively extend the strips. This is similar to moving but is useful for extending (or shortening) time around the current frame.
All selected strip handles to the «mouse side» of the current frame indicator will transform together, so you can change the duration of strips at the current frame.
Consejo
Extend is a convenient way to adjust the time of rough edits such as an «animatic» (sequential storyboards). Where it’s possible to select everything and adjust the length of strips around the current frame. This can be especially useful when adding in audio or other elements that could cause the timing to need adjustment.
When performing this operation you may want to enable so markers are updated too.
This simply a convenience operation, instead of manually selecting strips on one side of the current frame, as well as handles on one side of overlapping strips. Then selecting and transforming markers as well. This avoids the manual process, so re-timing can be accessed quickly.
Desclizar Contenidos del Clip#
Referencia
- Menú:
- Atajo:
S
The Slip tool allows you to change the position of the contents of a strip without moving the strip itself.
Adherir Clips al fotograma Actual#
Referencia
- Menú:
- Atajo:
Mayús-S
Moverá el clip o punto de control hasta el fotograma actual.
Elimina Desplazamiento del Clip#
Referencia
- Menú:
- Atajo:
Alt-O
To reset the (soft) start/end frame handles.
Intercambiar clips#
Referencia
- Menú:
- Izquierda Alt-Izquierda
Swaps the active strip with the strip to the left.
- Derecha Alt-Derecha
Swaps the active strip with the strip to the right.
Eliminar Huecos#
Referencia
- Menú:
- Atajo:
Retroceso
Remove blank frames between the current frame and the first strip to the left, independent of selection or locked state of strips.
- All Gaps
Remove gaps to the right of the strip along with the left.
Insertar Huecos#
Referencia
- Menú:
- Atajo:
Equals
Insert blank frames between the current frame and the first strips to the right, independent of selection or locked state of strips.
Image Transform#
Escalar hasta Ajustar#
Referencia
- Menú:
Adjusts the strips Scale Transforms so the visual contents of the strip to fit exactly within the project’s Resolution while maintaining the original aspect ratio.
This may mean that the transparent areas may be added along the content’s border to fit the content in the rendered area.
Scale to Fill#
Referencia
- Menú:
Adjusts the strips Scale Transforms so the visual contents of the strip to span the project’s Resolution while maintaining the original aspect ratio.
This may mean that portions of the original image no longer fit the content inside the rendered area.
Stretch to Fill#
Referencia
- Menú:
Adjusts the strips Scale Transforms so the visual contents of the strip to fill the project’s Resolution. Note, unlike the other two methods described above, Stretch to Fill does not maintaining the original aspect ratio.
This may mean that the original image becomes distorted to fit the content inside the rendered area.
Clear Position#
Referencia
- Menú:
Resets the strips Position Transforms to a value of zero.
Restablecer escala#
Referencia
- Menú:
Resets the strips Scale Transforms to a value of one.
Clear Rotation#
Referencia
- Menú:
Resets the strips Rotation Transform to a value of zero.
Eliminar Todo#
Referencia
- Menú:
Resets the strips position, scale, and rotation Transforms to their default values.
Dividir#
Referencia
- Menú:
- Atajo:
K
This splits the selected strip in two at the current frame. This will result in two strips which use the same source, fitting the original strip’s timing and length.
Consejo
This can be thought of as a quick way to duplicate the current strip, adjusting the start/end frames to form two non-overlapping strips showing the same content as before.
Hold Split#
Referencia
- Menú:
- Atajo:
Mayús-K
Like Split, it splits a strip in two distinct strips; however you will not be able to drag the endpoints to show the frames past the split of each resulting strip.
Although you can adjust the Hold Offset number fields in the Strip Info panel.
Consejo
This can be thought of as a way to simulate splitting the video file in two parts at the cut-point, replacing the current strip with each.
Duplicar Clips#
Referencia
- Menú:
- Atajo:
Mayús-D
Duplicate a strip to make an unlinked copy; drag it to a time and channel, and drop it by LMB click.
Borrar#
Referencia
- Menú:
- Atajo:
Suprimir, X
Delete the selected strip(s).
Update Scene Frame Range#
Referencia
- Menú:
For Scene strips only – Updates the strip’s Tiempo properties to match the referenced scene’s frame range. This operator should be used when the referenced scene’s length is extended or shortened.
Separate Images#
Referencia
- Menú:
- Atajo:
Y
For images sequence only – Converts the strip into multiple strips, one strip for each frame. Useful for slide shows and other cases where you want to bring in a set on non-continuous images.
- Longitud
You have to specify the duration you want the resulting strips will be.
Clip de video#
Establecer Tamaño de Procesamiento#
Referencia
- Menú:
Sets the render resolution and aspect to match the strip’s resolution.
Deinterlace Movies#
Referencia
- Menú:
Converts interlaced video into progressive video.
Effect Strip#
Change Effect Input#
Referencia
- Menú:
Swaps which strips are the input for the effect strip.
Change Effect Type#
Referencia
- Menú:
Switch the effects on a selected Effect strip.
Reassign Inputs#
Referencia
- Menú:
- Atajo:
R
This tool can be used to assign (reconnect) effect strips in a different way. Select three arbitrary strips and press R. If you don’t create a cycle, those will be connected to a new effect chain.
Swap Inputs#
Referencia
- Menú:
- Atajo:
Alt-S
Swaps the first two inputs for the effect strip.
Lock/Unlock#
- Lock Strips Shift-L
Disables the strip from being transformed.
- Unlock Strips Shift-Alt-L
Enables disabled strips allowing them to be transformed.
Silenciar/No Silenciar#
- Silenciar/No silenciar clips H, Alt-H
Silencia o no silencia el clip seleccionado.
- Silenciar/No Silenciar Clips Seleccionados Mayús-H, Ctrl-Alt-H
Mute or unmute all strips but the selected.
Entradas#
- Reload Strips Alt-R
Reloads the strips from their external saved location.
- Reload Strips and Adjust Length Shift-Alt-R
Reloads the strips from their external saved location and re-adjusts the strip duration.
- Change Path/Files
Changes the source file contained in a selected strip.
- Intercambiar datos
Swaps two sequence strips.
Fundido#
Referencia
- Menú:
This submenu contains tools to add or remove fades to strips. In case of visual strips the tools will animate the opacity or volume in case of audio strips.
- Eliminar fundido
Eliminará la animación de fundido de las secuencias seleccionadas.
- Fundido entrante y saliente
Fundido entrante y saliente de los clips seleccionados.
- Fade In
Fundido entrante de los clips seleccionados.
- Fundido saliente
Fundido saliente de los clips seleccionados.
- Desde fotograma actual
Fundirá desde el fotograma actual hasta el final de las secuencias superpuestas.
- Hasta fotograma actual
Fundirá desde el inicio de las secuencias que se encuentren bajo el cursor de tiempo, hasta el fotograma actual.
Retemporización#
Strips can be sped up or, slowed down by adding and moving retiming keys. Retiming controls can be activated for individual strips, after which keys can be selected and moved.
Nota
Only strip content is retimed, existing animation is not handled by the tool.
Effect strips can not be retimed.
Consejo
To quickly change selected strip speed, press R and enter desired speed.
Selección de claves de retemporización
Retiming keys are always shown on strip as inactive by default. In order to select retiming keys, Show Retiming Keys must be enabled. This property can also be enabled using Alternar claves de retemporización.
Multiple keys can be selected at once with box selection. Box select will select keys, only if a key is already selected. Otherwise it will select strips only.
Use Ctrl-LMB to select all keys to the right of the selected key.
Movimiento de claves de retemporización
Retiming key can be moved by dragging it with mouse, or by pressing G. The key is mapped to particular frame of strip content, so moving it effectively means moving a frame to a new position and therefore stretching, or contracting time flow.
When a key is moved, this does not affect position of other keys inside of the strip. If strip has more keys inside, multiple keys have to be selected, if only 1 segment has to be retimed. However if there are retiming keys outside of strip boundary, these will be moved along with first or last key in strip in order to preserve existing retiming, that is not visible.
Agregar clave de retemporización#
Referencia
- Editor:
Editor de video
- Menú:
Retiming key can be added to selected strips from retiming menu or by pressing I and choosing Add Retiming Key option. This adds a key to current frame. This operation will also create keys at strip start and end point, since these keys must be always present.
When keys are selected, strips are deselected, but it is still possible to add new keys. In this case keys will be added to strips where any key is selected.
Agregar congelado y deslizar#
Referencia
- Editor:
Editor de video
- Menú:
Freeze frame is used to stop strip playback at particular frame for any duration. Freeze frame can be added from strip retiming menu or context menu.
Nota
It is not possible to make smooth transition into or from freeze frame.
Agregar transición de velocidad y deslizar#
Referencia
- Editor:
Editor de video
- Menú:
It is possible to create smooth transition from one speed to another speed. This can be done by selecting retiming key between 2 segments of different speeds, and choosing Add Speed Transition either from strip retiming menu or context menu. This will create 2 keys, that are linked and always move in opposite direction. If both keys are moved at once, this changes where transition starts and ends.
Borrar claves de retemporización#
Referencia
- Editor:
Editor de video
- Menú:
Retiming key can be deleted by selecting and pressing Delete or X. When handle is deleted, strip size will not change, therefore speed will change to average between 2 retimed segments.
Nota
When transition key is removed, it will re-create simple retiming key from which transition was created.
Restablecer retemporización#
Referencia
- Editor:
Editor de video
- Menú:
Reverts all timing to the original strip.
Definir velocidad#
Referencia
- Editor:
Editor de video
- Menú:
Sets the speed of a retimed segment.
- Speed
The rate compared to the original time.
- Preservar la retemporización actual
Keeps the speed of the other retiming segments unchanged by adjusting the Duration of the strip instead.
Alternar claves de retemporización#
Referencia
- Editor:
Editor de video
- Menú:
- Atajo:
Ctrl-R
Enable’s the Show Retiming Keys strip property. This allows retiming keys to be shown for the first time and enables interacting with them.