Display NFSv4 statistics

- Result of the operations (success or failure)
- Total number of null operations
- Total number of compound operations
- Total number of access operations
- Total number of close operations
- Total number of commit operations
- Total number of create operations
- Total number of delegpurge operations
- Total number of delegret operations
- Total number of getattr operations
- Total number of getfh operations
- Total number of link operations
- Total number of lock operations
- Total number of lockt operations
- Total number of locku operations
- Total number of lookup operations
- Total number of lookupp operations
- Total number of nverify operations
- Total number of open operations
- Total number of openattr operations
- Total number of openconf operations
- Total number of opendowng operations
- Total number of putfh operations
- Total number of putpubfh operations
- Total number of putrootfh operations
- Total number of read operations
- Total number of readdir operations
- Total number of readlink operations
- Total number of remove operations
- Total number of rename operations
- Total number of renew operations
- Total number of restorefh operations
- Total number of savefh operations
- Total number of secinfo operations
- Total number of setattr operations
- Total number of setcliid operations
- Total number of setcliidconf operations
- Total number of verify operations
- Total number of write operations
- Total number of rellockown operations
- Total number of total operations
- Percent of null operations
- Percent of compound operations
- Percent of access operations
- Percent of close operations
- Percent of commit operations
- Percent of create operations
- Percent of delegpurge operations
- Percent of delegret operations
- Percent of getattr operations
- Percent of getfh operations
- Percent of link operations
- Percent of lock operations
- Percent of lockt operations
- Percent of locku operations
- Percent of lookup operations
- Percent of lookupp operations
- Percent of nverify operations
- Percent of open operations
- Percent of openattr operations
- Percent of openconf operations
- Percent of opendowng operations
- Percent of putfh operations
- Percent of putpubfh operations
- Percent of putrootfh operations
- Percent of read operations
- Percent of readdir operations
- Percent of readlink operations
- Percent of remove operations
- Percent of rename operations
- Percent of renew operations
- Percent of restorefh operations
- Percent of savefh operations
- Percent of secinfo operations
- Percent of setattr operations
- Percent of setcliid operations
- Percent of setCliidconf operations
- Percent of verify operations
- Percent of write operations
- Percent of rellockown operations

- { [-fields
`<fieldname>`, ...] - If you specify the
`-fields <fieldname>, ...`parameter, the command output also includes the specified field or fields. You can use '-fields ?' to display the fields to specify. - | [-instance
`]}` - If you specify the
`-instance`parameter, the command displays detailed information about all fields. - [-node
`{<nodename>|local}`] - Node - If you specify this parameter, the command displays NFSv4 statistics only for the specified node.
- [-result
`{success|failure|all}`] - Result - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified result (success/failure/all).
- [-null
`<Counter with Delta>`] - Null Procedure - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of null operations.
- [-cmpnd
`<Counter with Delta>`] - Compound Procedure - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of compound operations.
- [-access
`<Counter with Delta>`] - Access Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of access operations.
- [-close
`<Counter with Delta>`] - Close Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of close operations.
- [-commit
`<Counter with Delta>`] - Commit Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of commit operations.
- [-create
`<Counter with Delta>`] - Create Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of create operations.
- [-delpur
`<Counter with Delta>`] - Delegpurge Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of delegpurge operations.
- [-delrtn
`<Counter with Delta>`] - Delegret Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of delegret operations.
- [-gattr
`<Counter with Delta>`] - GetAttr Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of getattr operations.
- [-getfh
`<Counter with Delta>`] - GetFh Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of getfh operations.
- [-link
`<Counter with Delta>`] - Link Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of link operations.
- [-lock
`<Counter with Delta>`] - Lock Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of lock operations.
- [-lockt
`<Counter with Delta>`] - LockT Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of lockt operations.
- [-locku
`<Counter with Delta>`] - LockU Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of locku operations.
- [-lookup
`<Counter with Delta>`] - Lookup Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of lookup operations.
- [-lookpp
`<Counter with Delta>`] - LookupP Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of lookupp operations.
- [-nverfy
`<Counter with Delta>`] - Nverify Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of nverify operations.
- [-open
`<Counter with Delta>`] - Open Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of open operations.
- [-opattr
`<Counter with Delta>`] - OpenAttr Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of openattr operations.
- [-opconf
`<Counter with Delta>`] - OpenConf Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of openconf operations.
- [-opndg
`<Counter with Delta>`] - OpenDowng Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of opendowng operations.
- [-putfh
`<Counter with Delta>`] - PutFh Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of putfh operations.
- [-putpfh
`<Counter with Delta>`] - PutPubFh Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of putpubfh operations.
- [-putrfh
`<Counter with Delta>`] - PutRootFh Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of putrootfh operations.
- [-read
`<Counter with Delta>`] - Read Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of read operations.
- [-readdr
`<Counter with Delta>`] - ReadDir Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of readdir operations.
- [-rlink
`<Counter with Delta>`] - ReadLink Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of readlink operations.
- [-remove
`<Counter with Delta>`] - Remove Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of remove operations.
- [-rename
`<Counter with Delta>`] - Rename Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of rename operations.
- [-renew
`<Counter with Delta>`] - Renew Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of renew operations.
- [-restfh
`<Counter with Delta>`] - RestoreFh Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of restorefh operations.
- [-savefh
`<Counter with Delta>`] - SaveFh Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of savefh operations.
- [-secinf
`<Counter with Delta>`] - SecInfo Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of secinfo operations.
- [-sattr
`<Counter with Delta>`] - SetAttr Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of setattr operations.
- [-sclid
`<Counter with Delta>`] - SetCliId Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of setcliid operations.
- [-scidc
`<Counter with Delta>`] - SetCliIdConf Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of setcliidconf operations.
- [-verify
`<Counter with Delta>`] - Verify Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of verify operations.
- [-write
`<Counter with Delta>`] - Write Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of write operations.
- [-relown
`<Counter with Delta>`] - RelLockOwn Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of rellockown operations.
- [-total
`<Counter64 with Delta>`] - Total Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified number of total nfsv4 operations.
- [-null-pct
`<Counter with Delta>`] - Percent Null Procedure - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of null operations.
- [-cmpnd-pct
`<Counter with Delta>`] - Percent Compound Procedure - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of compound operations.
- [-access-pct
`<Counter with Delta>`] - Percent Access Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of access operations.
- [-close-pct
`<Counter with Delta>`] - Percent Close Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of close operations.
- [-commit-pct
`<Counter with Delta>`] - Percent Commit Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of commit operations.
- [-create-pct
`<Counter with Delta>`] - Percent Create Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of create operations.
- [-delpur-pct
`<Counter with Delta>`] - Percent Delegpurge Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of delegpurge operations.
- [-delrtn-pct
`<Counter with Delta>`] - Percent Delegret Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of delegret operations.
- [-gattr-pct
`<Counter with Delta>`] - Percent GetAttr Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of getattr operations.
- [-getfh-pct
`<Counter with Delta>`] - Percent GetFh Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of getfh operations.
- [-link-pct
`<Counter with Delta>`] - Percent Link Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of link operations.
- [-lock-pct
`<Counter with Delta>`] - Percent Lock Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of lock operations.
- [-lockt-pct
`<Counter with Delta>`] - Percent LockT Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of lockt operations.
- [-locku-pct
`<Counter with Delta>`] - Percent LockU Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of locku operations.
- [-lookup-pct
`<Counter with Delta>`] - Percent Lookup Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of lookup operations.
- [-lookpp-pct
`<Counter with Delta>`] - Percent LookupP Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of lookupp operations.
- [-nverfy-pct
`<Counter with Delta>`] - Percent Nverify Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of nverify operations.
- [-open-pct
`<Counter with Delta>`] - Percent Open Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of open operations.
- [-opattr-pct
`<Counter with Delta>`] - Percent OpenAttr Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of openattr operations.
- [-opconf-pct
`<Counter with Delta>`] - Percent OpenConf Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of openconf operations.
- [-opndg-pct
`<Counter with Delta>`] - Percent OpenDowng Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of opendowng operations.
- [-putfh-pct
`<Counter with Delta>`] - Percent PutFh Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of putfh operations.
- [-putpfh-pct
`<Counter with Delta>`] - Percent PutPubFh Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of putpubfh operations.
- [-putrfh-pct
`<Counter with Delta>`] - Percent PutRootFh Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of putrootfh operations.
- [-read-pct
`<Counter with Delta>`] - Percent Read Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of read operations.
- [-readdr-pct
`<Counter with Delta>`] - Percent ReadDir Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of readdir operations.
- [-rlink-pct
`<Counter with Delta>`] - Percent ReadLink Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of readlink operations.
- [-remove-pct
`<Counter with Delta>`] - Percent Remove Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of remove operations.
- [-rename-pct
`<Counter with Delta>`] - Percent Rename Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of rename operations.
- [-renew-pct
`<Counter with Delta>`] - Percent Renew Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of renew operations.
- [-restfh-pct
`<Counter with Delta>`] - Percent RestoreFh Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of restorefh operations.
- [-savefh-pct
`<Counter with Delta>`] - Percent SaveFh Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of savefh operations.
- [-secinf-pct
`<Counter with Delta>`] - Percent SecInfo Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of secinfo operations.
- [-sattr-pct
`<Counter with Delta>`] - Percent SetAttr Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of setattr operations.
- [-sclid-pct
`<Counter with Delta>`] - Percent SetCliId Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of setcliid operations.
- [-scidc-pct
`<Counter with Delta>`] - Percent SetCliIdConf Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of setcliidconf operations.
- [-verify-pct
`<Counter with Delta>`] - Percent Verify Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of verify operations.
- [-write-pct
`<Counter with Delta>`] - Percent Write Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of write operations.
- [-relown-pct
`<Counter with Delta>`] - Percent RelLockOwn Operations - If you specify this parameter, the command displays statistics only about the node or nodes that have the specified percentage of rellockown operations.

cluster1::> statistics nfs show-v4 -node node1 Node Value Delta Percent Ops Delta node1 ---------------------------success----------------------- Null Procs: 2 - 1% - Cmpnd Procs: 92 - - Access Ops: 16 - 6% - Close Ops: 8 - 3% - Commit Ops: 0 - 0% - Create Ops: 0 - 0% - Delpur Ops: 0 - 0% - Delrtn Ops: 0 - 0% - Getattr Ops: 76 - 27% - Getfh Ops: 22 - 8% - Link Ops: 0 - 0% - Lock Ops: 0 - 0% - Lockt Ops: 0 - 0% - Locku Ops: 0 - 0% - Lookup Ops: 13 - 5% - Lookupp Ops: 0 - 0% - Nverify Ops: 0 - 0% - Open Ops: 8 - 3% - Openattr Ops: 0 - 0% - Openconf Ops: 0 - 0% - Opendowng Ops: 0 - 0% - Putfh Ops: 92 - 32% - Putpubfh Ops: 0 - 0% - Putrootfh Ops: 2 - 1% - Read Ops: 0 - 0% - Readdir Ops: 2 - 1% - Readlink Ops: 0 - 0% - Remove Ops: 5 - 2% - Rename Ops: 3 - 1% - Renew Ops: 0 - 0% - Restorefh Ops: 11 - 4% - Savefh Ops: 13 - 5% - Secinfo Ops: 0 - 0% - Setattr Ops: 8 - 3% - Setclid Ops: 1 - 0% - Setclidconf Ops: 1 - 0% - Verify Ops: 0 - 0% - Write Ops: 3 - 1% - Rlockown Ops: 0 - 0% - Total Ops: 286 - Node Value Delta Percent Ops Delta node1 ---------------------------failure----------------------- Null Procs: 0 - 0% - Cmpnd Procs: 0 - - Access Ops: 0 - 0% - Close Ops: 0 - 0% - Commit Ops: 0 - 0% - Create Ops: 0 - 0% - Delpur Ops: 0 - 0% - Delrtn Ops: 0 - 0% - Getattr Ops: 0 - 0% - Getfh Ops: 0 - 0% - Link Ops: 0 - 0% - Lock Ops: 0 - 0% - Lockt Ops: 0 - 0% - Locku Ops: 0 - 0% - Lookup Ops: 5 - 63% - Lookupp Ops: 0 - 0% - Nverify Ops: 0 - 0% - Open Ops: 2 - 25% - Openattr Ops: 0 - 0% - Openconf Ops: 0 - 0% - Opendowng Ops: 0 - 0% - Putfh Ops: 0 - 0% - Putpubfh Ops: 0 - 0% - Putrootfh Ops: 0 - 0% - Read Ops: 0 - 0% - Readdir Ops: 0 - 0% - Readlink Ops: 0 - 0% - Remove Ops: 0 - 0% - Rename Ops: 0 - 0% - Renew Ops: 0 - 0% - Restorefh Ops: 0 - 0% - Savefh Ops: 0 - 0% - Secinfo Ops: 0 - 0% - Setattr Ops: 1 - 13% - Setclid Ops: 0 - 0% - Setclidconf Ops: 0 - 0% - Verify Ops: 0 - 0% - Write Ops: 0 - 0% - Rlockown Ops: 0 - 0% - Total Ops: 8 - Node Value Delta Percent Ops Delta node1 --------------------------- all ----------------------- Null Procs: 2 - 1% - Cmpnd Procs: 92 - - Access Ops: 16 - 5% - Close Ops: 8 - 3% - Commit Ops: 0 - 0% - Create Ops: 0 - 0% - Delpur Ops: 0 - 0% - Delrtn Ops: 0 - 0% - Getattr Ops: 76 - 26% - Getfh Ops: 22 - 7% - Link Ops: 0 - 0% - Lock Ops: 0 - 0% - Lockt Ops: 0 - 0% - Locku Ops: 0 - 0% - Lookup Ops: 18 - 6% - Lookupp Ops: 0 - 0% - Nverify Ops: 0 - 0% - Open Ops: 10 - 3% - Openattr Ops: 0 - 0% - Openconf Ops: 0 - 0% - Opendowng Ops: 0 - 0% - Putfh Ops: 92 - 31% - Putpubfh Ops: 0 - 0% - Putrootfh Ops: 2 - 1% - Read Ops: 0 - 0% - Readdir Ops: 2 - 1% - Readlink Ops: 0 - 0% - Remove Ops: 5 - 2% - Rename Ops: 3 - 1% - Renew Ops: 0 - 0% - Restorefh Ops: 11 - 4% - Savefh Ops: 13 - 4% - Secinfo Ops: 0 - 0% - Setattr Ops: 9 - 3% - Setclid Ops: 1 - 0% - Setclidconf Ops: 1 - 0% - Verify Ops: 0 - 0% - Write Ops: 3 - 1% - Rlockown Ops: 0 - 0% - Total Ops: 294 -