Dải (Strip)#

Tổng Hợp (Compositing)#

Tham Chiếu (Reference)

Panel (Bảng):

Thanh Bên (Sidebar) ‣ Dải (Strip) ‣ Tổng Hợp (Compositing)

Pha Trộn (Blend)

The method for blending the current strip with strips in lower channels. See Blend Modes for more information.

Độ Đục (Opacity)

The transparency (alpha) of the strip.

When this property is animated, the opacity is drawn as an overlay on the strip. The overlay will look like a dark section that follows the animation curve. This can be hidden by disabling the F-Curves.

Transform (Biến Hóa)#

Tham Chiếu (Reference)

Panel (Bảng):

Thanh Bên (Sidebar) ‣ Dải (Strip) ‣ Biến Hóa (Transform)

Thanh Lọc (Filter)

The technique used to estimate the values of pixels at non-integer coordinates within the image.

Tự Động (Auto):

Automatically choose filter based on scaling factor.

  • No scale, no rotation, integer positions: Nearest

  • Scaling up by more than 2x: Cubic Mitchell

  • Scaling down by more than 2x: Box

  • Otherwise: Bilinear

Gần Nhất (Nearest):

No interpolation; uses nearest neighboring pixel (fastest).

Song Tuyến Tính (Bilinear):

Interpolate between 2×2 samples.

Cubic Mitchell:

Cubic Mitchell filter on 4×4 samples.

Cubic B-Spline:

Cubic B-Spline filter (blurry but no ringing) on 4×4 samples.

Hình Hộp (Box):

Averages source image samples that fall under destination pixel.

Vị Trí X, Y (Position X, Y)

Được sử dụng để di chuyển các khung hình dọc theo trục X và Y.

Tỷ Lệ X, Y (Scale X, Y)

Đổi tỷ lệ hình ảnh trên trục X và Y.

Xoay Chiều (Rotation)

Xoay đầu vào theo hai chiều dọc theo trục Z.

Phản Chiếu Đối Xứng (Mirror)

Phản chiếu hình ảnh dọc theo trục X (từ trái sang phải) hoặc trục Y (từ trên xuống dưới).

Cắt Xén (Crop)#

Tham Chiếu (Reference)

Panel (Bảng):

Thanh Bên (Sidebar) ‣ Dải (Strip) ‣ Cắt Xén (Crop)

Được sử dụng để cắt hình ảnh nguồn. Sử dụng "Đỉnh", "Trái", "Đáy" và "Phải" để điều khiển số lượng điểm ảnh được cắt xén.

Phim Video#

Tham Chiếu (Reference)

Panel (Bảng):

Thanh Bên (Sidebar) ‣ Dải (Strip) ‣ Video

Chớp/Giật (Strobe)

Display every nth frame. For example, if you set this to 10, the strip will only display frames 1, 11, 21, 31, 41... of the source.

It is important to realize that this property is a float value. This allows you to strobe effect synced exactly to a beat.

Đảo Ngược các Khung Hình (Reverse Frames)

Plays the strip backwards starting from the last frame in the sequence.

Màu Sắc (Color)#

Tham Chiếu (Reference)

Panel (Bảng):

Thanh Bên (Sidebar) ‣ Dải (Strip) ‣ Màu Sắc (Color)

Saturation (Độ Bão Hòa)

Adjusts the vividness of colors in the image.

Nhân (Multiply)

Multiplies the colors by this value. This will increase the brightness.

Nhân Alpha (Multiply Alpha)

Multiply alpha along with color channels when using the Multiply option.

Đổi Thành Số Thực Float (Convert to Float)

Chuyển đổi đầu vào thành dữ liệu float.

Âm Thanh (Sound)#

Tham Chiếu (Reference)

Panel (Bảng):

Thanh Bên (Sidebar) ‣ Dải (Strip) ‣ Âm Thanh (Sound)

Working with sound is documented further at Dải Âm Thanh (Sound Strip).

Âm Lượng/Thể Tích (Volume)

Adjusts the perceived loudness or intensity of the sound

When this property is animated, the volume is drawn as an overlay on the strip. The overlay will look like a dark section that follows the animation curve. This can be hidden by disabling the F-Curves. The value is also reflected in the waveform.

../../../../_images/vse_setup_project_striptypes_sound-pan.png
Lia (Pan)

Used to pan the audio between speakers in multichannel audio. Only mono sources can be panned, if the source file is not mono enable Mono to mix the channels together.

This value basically represents the angle at which it's played if you multiply the value by 90 degrees.

For stereo output panning works from left (-1) to right (1); where 0 means front/center, -1 means to the left and 1 to the right.

To address rear speakers, you can pan to those with the higher values; where -2 is back left, and 2 is back right.

Mẹo

For smooth animation you can assign values outside the soft bounds, since the angle wraps around over multiple rotations.

Ghi chú

The number of audio channels can be configured in the Audio Output settings.

Display Waveform

Display an approximate waveform of the sound file inside of the Sound strip. The waveform reflects strip volume and its animation using keyframes.

Clipping audio, i.e. values over 100% amplitude, will be shown in red in the waveform.

Đơn Kênh (Mono)

Mixdown all audio channels into a single channel.

Thời Gian (Time)#

Tham Chiếu (Reference)

Panel (Bảng):

Thanh Bên (Sidebar) ‣ Dải (Strip) ‣ Thời Gian (Time)

Bảng điều khiển Thời Gian được sử dụng để điều khiển nguồn và vị trí dòng thời gian của dải.

Khóa [biểu tượng cái khóa] (Lock [padlock icon])

Prevents the strip from being moved (found in the panel header).

Show Retiming Keys

Toggle visibility and selectability of Retiming keys.

Kênh (Channel)

Đổi số kênh, hoặc hàng, của dải.

Khởi/Đầu (Start)

Changes the starting frame number of the strip, which is the same as selecting and moving the strip.

Thời lượng (Duration)

Changes the length, in frames of the strip. This works by changing the end frame, which is the same as selecting and moving the strip's right handle.

Cuối/Kết Thúc (End)

Specifies the ending time and ending frame number for the strip.

Dịch Chuyển Khởi Đầu/Kết Thúc của Dải (Strip Offset Start/End)

Can be used to either extend the strip beyond the end frame by repeating the last frame. Or it can be used to shorten the strip, as if you were cropping the end frame. This is the same as adjusting the strip handles.

Dịch Chuyển Cắt Đầu/Cuối (Hold Offset Start/End)

Offset of the uncut strip content.

Khung Hình Hiện Tại (Current Frame)

The frame number relative to the start of the active strip.

Nguồn (Source)#

Tham Chiếu (Reference)

Panel (Bảng):

Thanh Bên (Sidebar) ‣ Dải (Strip) ‣ Nguồn (Source)

The Source panel is used to control sources of the strip such as filename and file path and various methods of interpreting these files.

Đường Đi/Dẫn (Path)

The directory that contains the source file. When the file is moved, the path can be updated instead of recreating the strip.

Tập Tin (File)

The file name of the source file. For image strips showing an image sequence, this will be different for each frame.

Đổi Dữ Liệu/Tập Tin (Change Data/Files)

Same as the Path and File fields, but this time combined to open the File Browser in order to find the file(s) you search. Same as Strip ‣ Inputs ‣ Change Paths/Files.

Color Space (Không Gian Màu Sắc)

Để chỉ định không gian màu của tập tin nguồn.

Danh sách các không gian màu phụ thuộc vào Cấu Hình OCIO (OCIO config) đang hoạt động. Các không gian màu được hỗ trợ mặc định được miêu tả chi tiết tại đây: Cấu Hình OpenColorIO Mặc Định (Default OpenColorIO Configuration)

Chế Độ Alpha (Alpha Mode)

If the source file has an Alpha (transparency) channel, you can choose:

Straight Alpha or Premultiplied Alpha

Stream Index Movie Strip

For files with several movie streams, use the stream with the given index.

Gộp Trường (Deinterlace)

Removes fields in a video file. For example, if it is an analog video and it has even or odd interlacing fields.

Thông Tin về Nguồn (Source Information)

Hiển thị thông tin về phương tiện truyền thông của dải.

Độ Phân Giải (Resolution)

Resolution of the active strip image output.

FPS Movie Strip

The frame rate encoded into the video file. If this value does not match the scene Frame Rate the perceived speed of the media will be wrong unless the speed is changed to account for the difference in frame rate.

Các Tùy Chọn đối với Dải Âm Thanh (Options for Sound Strips)#

Âm Thanh (Sound)

Trình đơn khối dữ liệu (Data-block menu) để chọn âm thanh.

Đường Đi/Dẫn (Path)

Path to the sound file used by this data-block menu.

Đóng Gói (Pack)

Pack sound into the blend-file.

Giữ trong Bộ Nhớ Đệm (Caching)

Tập tin âm thanh được giải mã và lưu giữ trong Bộ Nhớ.

Thông Tin về Nguồn (Source Information)

Hiển thị thông tin về phương tiện truyền thông của dải.

Tần Số Lấy Mẫu (Samplerate)

Số lượng mẫu lấy trong mỗi giây khi âm thanh được mã hóa.

Kênh (Channels)

Số kênh âm thanh được mã hóa thành luồng âm thanh.