Argumentos de la línea de comandos

Blender |VERSIÓN_DE_BLENDER|

Uso: blender [args ...] [archivo] [args ...]

Opciones de procesamiento

-b, --background

Run in background (often used for UI-less rendering).

The audio device is disabled in background-mode by default and can be re-enabled by passing in -setaudo Default afterwards.

-a, --render-anim

Render frames from start to end (inclusive).

-S, --scene <nombre>

Define la escena activa <nombre> para que sea procesada.

-f, --render-frame <fotograma>

Procesará el fotograma <fotograma> y lo guardará.

• +<fotograma> fotograma de inicio relativo, -<fotograma> fotograma de fin relativo.

• También será posible usar una lista de fotogramas separados por comas (sin espacios).

• Se podrá definir un rango de fotogramas usando el separador .. entre el primer y último fotograma (que estará incluido).

-s, --frame-start <fotograma>

Set start to frame <frame>, supports +/- for relative frames too.

-e, --frame-end <fotograma>

Set end to frame <frame>, supports +/- for relative frames too.

-j, --frame-jump <fotogramas>

Set number of frames to step forward after each rendered frame.

-o, --render-output <ruta>

Set the render path and file name. Use // at the start of the path to render relative to the blend-file.

The # characters are replaced by the frame number, and used to define zero padding.

• prueba_##_animación.png se transformará en prueba_01_animación.png

• prueba-######.png se transformará en prueba-000001.png

When the filename does not contain #, the suffix #### is added to the filename.

The frame number will be added at the end of the filename, eg:

blender -b animation.blend -o //render_ -F PNG -x 1 -a

//anim_ se transformará en //anim_####, guardando fotogramas como //anim_0001.png

-E, --engine <motor>

Specify the render engine. Use -E help to list available engines.

-t, --threads <hilos>

Use amount of <threads> for rendering and other operations [1-1024], 0 to use the systems processor count.

Opciones de procesamiento con Cycles

Cycles add-on options must be specified following a double dash.

--cycles-device <dispositivo>

Establece el dispositivo usado para el procesamiento. Las opciones válidas son: CPU CUDA OPTIX HIP ONEAPI METAL.

Anexar +CPU a un dispositivo GPU para procesar tanto en CPU como en GPU.

Ejemplo:

blender -b file.blend -f 20 -- --cycles-device OPTIX

--cycles-print-stats

Log statistics about render memory and time usage.

Opciones de formato

-F, --render-format <formato>

Establece el formato de imagen procesada. Las opciones válidas son: TGA RAWTGA JPEG IRIS AVIRAW AVIJPEG PNG BMP HDR TIFF.

Formatos que pueden ser compilados en Blender, pero no disponibles en todos los sistemas: OPEN_EXR OPEN_EXR_MULTILAYER FFMPEG CINEON DPX JP2 WEBP.

-x, --use-extension <booleana>

Set option to add the file extension to the end of the file.

Opciones de reproducción de animación

-a <opciones> <archivo(s)>

Instead of showing Blender’s user interface, this runs Blender as an animation player, to view movies and image sequences rendered in Blender (ignored if -b is set).

Argumentos de reproducción:

-p <sx> <sy>

Open with lower left corner at <sx>, <sy>.

-m

Read from disk (Do not buffer).

-f <fps> <fps_base>

Specify FPS to start with.

-j <fotograma>

Set frame step to <frame>.

-s <fotograma>

Play from <frame>.

-e <fotograma>

Play until <frame>.

-c <memoria_caché>

Amount of memory in megabytes to allow for caching images during playback. Zero disables (clamping to a fixed number of frames instead).

Opciones de ventana

-w, --window-border

Force opening with borders.

-W, --window-fullscreen

Force opening in full-screen mode.

-p, --window-geometry <sx> <sy> <ancho> <altura>

Open with lower left corner at <sx>, <sy> and width and height as <w>, <h>.

-M, --window-maximized

Force opening maximized.

-con, --start-console

Start with the console window open (ignored if -b is set), (Windows only).

--no-native-pixels

Do not use native pixel size, for high resolution displays (MacBook Retina).

--no-window-focus

Open behind other windows and without taking focus.

Opciones de Python

-y, --enable-autoexec

Enable automatic Python script execution.

-Y, --disable-autoexec

Disable automatic Python script execution (Python-drivers & startup scripts), (default).

-P, --python <ruta_a_archivo>

Run the given Python script file.

--python-text <nombre>

Run the given Python script text block.

--python-expr <expresión>

Run the given expression as a Python script.

--python-console

Ejecutar Blender con una consola interactiva.

--python-exit-code <código>

Set the exit-code in [0..255] to exit if a Python exception is raised (only for scripts executed from the command line), zero disables.

--python-use-system-env

Allow Python to use system environment variables such as PYTHONPATH and the user site-packages directory.

--addons <complemento(s)>

Comma separated list (no spaces) of add-ons to enable in addition to any default add-ons.

Opciones de red

--online-mode

Allow internet access, overriding the preference.

--offline-mode

Disallow internet access, overriding the preference.

Opciones de registro

--log <coincidencia>

Enable logging categories, taking a single comma separated argument. Multiple categories can be matched using a .* suffix, so --log "wm.*" logs every kind of window-manager message. Sub-string can be matched using a * prefix and suffix, so --log "*undo*" logs every kind of undo-related message. Use «^» prefix to ignore, so --log "*,^wm.operator.*" logs all except for wm.operators.* Use «*» to log everything.

--log-level <nivel>

Set the logging verbosity level (higher for more details) defaults to 1, use -1 to log all levels.

--log-show-basename

Only show file name in output (not the leading path).

--log-show-backtrace

Show a back trace for each log message (debug builds only).

--log-show-timestamp

Show a timestamp for each log message in seconds since start.

--log-file <ruta_a_archivo>

Set a file to output the log to.

Opciones de depuración

-d, --debug

Turn debugging on.

• Enables memory error detection

• Disables mouse grab (to interact with a debugger in some cases)

• Keeps Python’s sys.stdin rather than setting it to None

--debug-value <valor>

Set debug value of <value> on startup.

--debug-events

Enable debug messages for the event system.

--debug-ffmpeg

Enable debug messages from FFmpeg library.

--debug-handlers

Enable debug messages for event handling.

--debug-libmv

Enable debug messages from libmv library.

--debug-cycles

Enable debug messages from Cycles.

--debug-memory

Enable fully guarded memory allocation and debugging.

--debug-jobs

Enable time profiling for background jobs.

--debug-python

Enable debug messages for Python.

--debug-depsgraph

Enable all debug messages from dependency graph.

--debug-depsgraph-eval

Enable debug messages from dependency graph related on evaluation.

--debug-depsgraph-build

Enable debug messages from dependency graph related on graph construction.

--debug-depsgraph-tag

Enable debug messages from dependency graph related on tagging.

--debug-depsgraph-no-threads

Switch dependency graph to a single threaded evaluation.

--debug-depsgraph-time

Enable debug messages from dependency graph related on timing.

--debug-depsgraph-pretty

Enable colors for dependency graph debug messages.

--debug-depsgraph-uid

Verify validness of session-wide identifiers assigned to ID data-blocks.

--debug-ghost

Enable debug messages for Ghost (Linux only).

--debug-wintab

Enable debug messages for Wintab.

--debug-gpu

Enable GPU debug context and information for OpenGL 4.3+.

--debug-gpu-force-workarounds

Enable workarounds for typical GPU issues and disable all GPU extensions.

--debug-gpu-compile-shaders

Compile all statically defined shaders to test platform compatibility.

--debug-gpu-scope-capture

Capture the GPU commands issued inside the give scope name.

--debug-gpu-renderdoc

Enable Renderdoc integration for GPU frame grabbing and debugging.

--debug-wm

Enable debug messages for the window manager, shows all operators in search, shows keymap errors.

--debug-xr

Enable debug messages for virtual reality contexts. Enables the OpenXR API validation layer, (OpenXR) debug messages and general information prints.

--debug-xr-time

Enable debug messages for virtual reality frame rendering times.

--debug-all

Enable all debug messages.

--debug-io

Enable debug messages for I/O (Collada, …).

--debug-fpe

Enable floating-point exceptions.

--debug-exit-on-error

Immediately exit when internal errors are detected.

--debug-freestyle

Enable debug messages for Freestyle.

--disable-crash-handler

Disable the crash handler.

--disable-abort-handler

Disable the abort handler.

--verbose <nivel>

Set the logging verbosity level for debug messages that support it.

-q, --quiet

Suppress status printing (warnings & errors are still printed).

Opciones de GPU

--gpu-backend

Force to use a specific GPU backend. Valid options: vulkan (experimental), metal, opengl.

--gpu-compilation-subprocesses

Override the Max Compilation Subprocesses setting (OpenGL only).

Opciones varias

--open-last

Open the most recently opened blend file, instead of the default startup file.

--app-template <plantilla>

Set the application template (matching the directory name), use default for none.

--factory-startup

Skip reading the startup.blend in the users home directory.

--enable-event-simulate

Enable event simulation testing feature bpy.types.Window.event_simulate.

--env-system-datafiles

Set the BLENDER_SYSTEM_DATAFILES environment variable.

--env-system-scripts

Set the BLENDER_SYSTEM_SCRIPTS environment variable.

--env-system-extensions

Set the BLENDER_SYSTEM_EXTENSIONS environment variable.

--env-system-python

Set the BLENDER_SYSTEM_PYTHON environment variable.

-noaudio

Force sound system to None.

-setaudio

Fuerza el sistema de audio a un dispositivo específico. None (ninguno), Default (predefinido), SDL, OpenAL, CoreAudio, JACK, PulseAudio o WASAPI.

-c, --command <comando>

Run a command which consumes all remaining arguments. Use -c help to list all other commands. Pass --help after the command to see its help text.

This implies --background mode.

-h, --help

Print this help text and exit.

/?

Print this help text and exit (Windows only).

-r, --register

Register blend-file extension for current user, then exit (Windows & Linux only).

--register-allusers

Register blend-file extension for all users, then exit (Windows & Linux only).

--unregister

Unregister blend-file extension for current user, then exit (Windows & Linux only).

--unregister-allusers

Unregister blend-file extension for all users, then exit (Windows & Linux only).

-v, --version

Print Blender version and exit.

--

End option processing, following arguments passed unchanged. Access via Python’s sys.argv.

Procesamiento de los argumentos

Los argumentos deberá estar separados por espacios en blanco, p.ej:

blender -ba test.blend

…will exit since -ba is an unknown argument.

Orden de los argumentos

Arguments are executed in the order they are given. eg:

blender --background test.blend --render-frame 1 --render-output "/tmp"

…will not render to /tmp because --render-frame 1 renders before the output path is set.

blender --background --render-output /tmp test.blend --render-frame 1

…will not render to /tmp because loading the blend-file overwrites the render output that was set.

blender --background test.blend --render-output /tmp --render-frame 1

…works as expected.

Variables de entorno

BLENDER_USER_RESOURCES:

Replace default directory of all user files. Other BLENDER_USER_* variables override when set.

BLENDER_USER_CONFIG:

Directory for user configuration files.

BLENDER_USER_SCRIPTS:

Directory for user scripts.

BLENDER_USER_EXTENSIONS:

Directory for user extensions.

BLENDER_USER_DATAFILES:

Directory for user data files (icons, translations, ..).

BLENDER_SYSTEM_RESOURCES:

Replace default directory of all bundled resource files.

BLENDER_SYSTEM_SCRIPTS:

Directory to add more bundled scripts.

BLENDER_SYSTEM_EXTENSIONS:

Directory for system extensions repository.

BLENDER_SYSTEM_DATAFILES:

Directory to replace bundled datafiles.

BLENDER_SYSTEM_PYTHON:

Directory to replace bundled Python libraries.

OCIO:

Ruta para sobrescribir el archivo de configuración de OpenColorIO.

TEMP:

Store temporary files here (MS-Windows).

TMPDIR:

Store temporary files here (UNIX Systems). The path must reference an existing directory or it will be ignored.