Restricción Genérica con tensores#

Referencia

Panel:

Dinámicas ‣ Restricción de cuerpo rígido

Tipo:

Genérica con tensores

The generic spring constraint adds some spring parameters for the X/Y/Z axes to all the options available on the Generic constraint. Using the spring alone allows the objects to bounce around as if attached with a spring anchored at the constraint object. This is usually a little too much freedom, so most applications will benefit from enabling translation or rotation constraints.

If the damping on the springs is set to 1, then the spring forces are prevented from realigning the anchor points, leading to strange behavior. If your springs are acting weird, check the damping.

Opciones#

Límites
X/Y/Z Axis

Enables/disables limit translation on X, Y or Z axis respectively.

Inferior

Lower limit of translation for X, Y or Z axis respectively.

Superior

Upper limit of translation for X, Y or Z axis respectively.

Ángulo X/Y/Z

Enables/disables limit rotation around the X, Y or Z axis respectively.

Inferior

Lower limit of rotation for X, Y or Z axis respectively.

Superior

Upper limit of rotation for X, Y or Z axis respectively.

Springs
X/Y/Z Axis

Enables/disables springs translation on X, Y or Z axis respectively.

Rigidez

Spring Stiffness of the translation on X, Y or Z axis respectively. Specifies how «bendy» the spring is.

Damping

Spring Damping of the translation on X, Y or Z axis respectively. Amount of damping the spring has.

Ángulo X/Y/Z

Enables/disables springs rotation around the X, Y or Z axis respectively.

Rigidez

Spring Stiffness of the rotation around the X, Y or Z axis respectively. Specifies how «bendy» the spring is.

Damping

Spring Damping of the rotation around the X, Y or Z axis respectively. Amount of damping the spring has.