Strip – Смужка#

Compositing – Компонування#

Reference – Довідка

Panel – Панель:

Sidebar ‣ Strip ‣ Compositing

Blend – Змішання

The method for blending the current strip with strips in lower channels. See Blend Modes for more information.

Opacity – Безпрозорість

The transparency (alpha) of the strip.

When this property is animated, the opacity is drawn as an overlay on the strip. The overlay will look like a dark section that follows the animation curve. This can be hidden by disabling the F-Curves.

Transform – Трансформа#

Reference – Довідка

Panel – Панель:

Sidebar ‣ Strip ‣ Transform

Filter – Фільтр

The technique used to estimate the values of pixels at non-integer coordinates within the image.

Auto – Авто:

Automatically choose filter based on scaling factor.

  • No scale, no rotation, integer positions: Nearest

  • Scaling up by more than 2x: Cubic Mitchell

  • Scaling down by more than 2x: Box

  • Otherwise: Bilinear

Nearest – Найближче:

No interpolation; uses nearest neighboring pixel (fastest).

Bilinear – Білінеарно:

Interpolate between 2×2 samples.

Cubic Mitchell:

Cubic Mitchell filter on 4×4 samples.

Cubic B-Spline:

Cubic B-Spline filter (blurry but no ringing) on 4×4 samples.

Box – Коробка:

Averages source image samples that fall under destination pixel.

Position X, Y

Used to move the frames along the X and Y axis.

Scale X, Y – Масштаб X, Y

Масштабується зображення по осях X та Y.

Rotation – Обертання

Обертає увід двовимірно навколо Z осі.

Mirror – Дзеркалення

Mirrors the image along the X axis (left to right) or the Y axis (top to bottom).

Обрізка – Crop#

Reference – Довідка

Panel – Панель:

Sidebar ‣ Strip ‣ Crop

Used to crop the source image. Use Top, Left, Bottom, and Right to control the number of pixels that are cropped.

Відео – Video#

Reference – Довідка

Panel – Панель:

Sidebar ‣ Strip ‣ Video

Строб – Strobe

Display every nth frame. For example, if you set this to 10, the strip will only display frames 1, 11, 21, 31, 41… of the source.

It is important to realize that this property is a float value. This allows you to strobe effect synced exactly to a beat.

Розвернути Кадри – Reverse Frames

Plays the strip backwards starting from the last frame in the sequence.

Color – Колір#

Reference – Довідка

Panel – Панель:

Sidebar ‣ Strip ‣ Color

Saturation – Насиченість

Adjusts the vividness of colors in the image.

Multiply – Множення

Multiplies the colors by this value. This will increase the brightness.

Множити на Альфа – Multiply Alpha

Multiply alpha along with color channels when using the Multiply option.

Конвертувати у Дійсночислове – Convert to Float

Конвертує увід у дійсночислові дані.

Звук – Sound#

Reference – Довідка

Panel – Панель:

Sidebar ‣ Strip ‣ Sound

Working with sound is documented further at Sound Strip.

Volume – Об’єм

Adjusts the perceived loudness or intensity of the sound

When this property is animated, the volume is drawn as an overlay on the strip. The overlay will look like a dark section that follows the animation curve. This can be hidden by disabling the F-Curves. The value is also reflected in the waveform.

../../../../_images/vse_setup_project_striptypes_sound-pan.png
Pan – Панорамування

Used to pan the audio between speakers in multichannel audio. Only mono sources can be panned, if the source file is not mono enable Mono to mix the channels together.

This value basically represents the angle at which it’s played if you multiply the value by 90 degrees.

For stereo output panning works from left (-1) to right (1); where 0 means front/center, -1 means to the left and 1 to the right.

To address rear speakers, you can pan to those with the higher values; where -2 is back left, and 2 is back right.

Порада

For smooth animation you can assign values outside the soft bounds, since the angle wraps around over multiple rotations.

Примітка

The number of audio channels can be configured in the Audio Output settings.

Показ Хвилеформи – Display Waveform

Display an approximate waveform of the sound file inside of the Sound strip. The waveform reflects strip volume and its animation using keyframes.

Clipping audio, i.e. values over 100% amplitude, will be shown in red in the waveform.

Моно – Mono

Mixdown all audio channels into a single channel.

Time – Час#

Reference – Довідка

Panel – Панель:

Sidebar ‣ Strip ‣ Time

Панель Time використовується для керування джерелом та позицією на часолінії смужки.

Lock (padlock icon) – Блокування (іконка замка)

Запобігає переміщенню смужки (знаходиться у заголовку панелі).

Show Retiming Keys

Toggle visibility and selectability of Retiming keys.

Channel – Канал

Змінює номер каналу, або ряд, смужки.

Start – Старт

Змінює номер стартового кадру смужки, що є альтернативою вибиранню і переміщуванню смужки.

Duration – Тривалість

Changes the length, in frames of the strip. This works by changing the end frame, which is the same as selecting and moving the strip’s right handle.

Кінець – End

Визначає час закінчування та номер кадру закінчування для смужки.

Старт/Кінець Зсуву Смужки – Strip Offset Start/End

Can be used to either extend the strip beyond the end frame by repeating the last frame. Or it can be used to shorten the strip, as if you were cropping the end frame. This is the same as adjusting the strip handles.

Старт/Кінець Зсуву Тримання – Hold Offset Start/End

Зсув вмісту нерозрізаної смужки.

Поточний Кадр – Current Frame

The frame number relative to the start of the active strip.

Source – Джерело#

Reference – Довідка

Panel – Панель:

Sidebar ‣ Strip ‣ Source

Панель Source використовується для керування джерелами смужки, такими як ім’я файлу й шлях файлу, а також різноманітними методами інтерпретування цих файлів.

Path – Шлях

The directory that contains the source file. When the file is moved, the path can be updated instead of recreating the strip.

File – Файл

The file name of the source file. For image strips showing an image sequence, this will be different for each frame.

Змінити Дані/Файли – Change Data/Files

Same as the Path and File fields, but this time combined to open the File Browser in order to find the file(s) you search. Same as Strip ‣ Inputs ‣ Change Paths/Files.

Color Space – Колірний Простір

Для визначення простору кольорів файлу джерела.

The list of color spaces depends on the active OCIO config. The default supported color spaces are described in detail here: Default OpenColorIO Configuration

Alpha Mode – Режим Альфа

Якщо файл джерела має канал Альфа (прозорість), то ви можете вибрати один з його режимів:

Straight Alpha – «Пряме Альфа» або Premultiplied Alpha – «Передмножене Альфа»

Stream Index Movie Strip

For files with several movie streams, use the stream with the given index.

Deinterlace – Знечергування

Вилучає поля у файлі відео. Наприклад, якщо це аналогове відео та воно має парні або непарні черговані поля.

Source Information

Displays information about the strip’s media.

Роздільність – Resolution

Роздільність виводу зображення активної смужки.

FPS Movie Strip

The frame rate encoded into the video file. If this value does not match the scene Frame Rate the perceived speed of the media will be wrong unless the speed is changed to account for the difference in frame rate.

Опції для Смужок Звуку – Options for Sound Strips#

Звук – Sound

Data-block menu для вибору звуку.

Path – Шлях

Шлях до файлу звуку використовується цим меню data-block.

Pack – Упакування

Упаковується звук у цей blend-файл.

Кешування – Caching

Файлу звуку розкодовується та завантажується в оперативну пам’ять RAM.

Source Information

Displays information about the strip’s media.

Samplerate

The number of samples per second the audio is encoded at.

Channels – Канали

The number of audio channels encoded into the audio stream.